Shared Projects

Shared Projects

fob_gerbers

author: jkuzmeski
Top
Bottom

2 layer board of 3.00 x 3.00 inches (76.2 x 76.2 mm)
Uploaded: November 15, 2022
Shared: November 15, 2022
Total Price: $45.00

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

DATAHERDER v0.1

author: AGenews
Top
Bottom

2 layer board of 3.62 x 0.70 inches (92.0 x 17.8 mm)
Uploaded: November 15, 2022
Shared: November 15, 2022
Total Price: $12.65

Designed for 2 Layer 2oz 0.8mm Service.
https://docs.oshpark.com/services/two-layer-hhdc/ Enjoy!

Designed for 2 Layer 2oz 0.8mm Service.
https://docs.oshpark.com/services/two-layer-hhdc/ Enjoy!

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

ARM20 Buddy v1.1

author: Russ
Top
Bottom

2 layer board of 1.42 x 1.00 inches (36.2 x 25.5 mm)
Uploaded: November 15, 2022
Shared: November 15, 2022
Total Price: $7.10

Customize ARM20 JTAG interface for use on microcontrollers. Can provide 5V, 3.3V, 1.8V, or 1.2V on VTRef to power the target. VTRef is pin 1 of the JTAG conector. Can also provide a 12V programming voltage and switch to an SWD mode as discussed here https://github.com/arduino/OpenOCD/blob/master/…

Show full description

Customize ARM20 JTAG interface for use on microcontrollers. Can provide 5V, 3.3V, 1.8V, or 1.2V on VTRef to power the target. VTRef is pin 1 of the JTAG conector. Can also provide a 12V programming voltage and switch to an SWD mode as discussed here https://github.com/arduino/OpenOCD/blob/master/…

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

mag-swerve-rio-breakout

author: tekdemo
Top
Bottom

2 layer board of 1.63 x 1.03 inches (41.4 x 26.2 mm)
Uploaded: October 13, 2022
Shared: November 15, 2022
Total Price: $8.35

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

GasCap.v02e

author: PeskyProducts
Top
Bottom

4 layer board of 0.63 x 2.44 inches (16.0 x 62.0 mm)
Uploaded: November 15, 2022
Shared: November 15, 2022
Total Price: $15.30

CMWX1ZZABZ-078 M0+ LoRaWAN embedded MCU host plus CAM M8Q concurrent GNSS with 8 MByte SPI NOR flash memory for data logging, LIS2DW12 accel for wake-on-motion, BME280 for P/T/%relH, and integrated AA battery (3.6V, 2400 mAH LiSOCl2) holder. ![ GasCap](https://user-images.githubusercontent.com/6…

Show full description

CMWX1ZZABZ-078 M0+ LoRaWAN embedded MCU host plus CAM M8Q concurrent GNSS with 8 MByte SPI NOR flash memory for data logging, LIS2DW12 accel for wake-on-motion, BME280 for P/T/%relH, and integrated AA battery (3.6V, 2400 mAH LiSOCl2) holder. ![ GasCap](https://user-images.githubusercontent.com/6…

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Permalink
    • Embed link
Embeddable link to order this shared Project

UTI-Teensy-v2.kicad_pcb

author: sluitz-s
Top
Bottom

2 layer board of 3.35 x 2.76 inches (85.0 x 70.0 mm)
Uploaded: November 14, 2022
Shared: November 14, 2022
Total Price: $46.10

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Permalink
    • Embed link
Embeddable link to order this shared Project

CRT Power and Audio Board

author: tymarbry
Top
Bottom

2 layer board of 1.78 x 2.55 inches (45.2 x 64.9 mm)
Uploaded: August 05, 2022
Shared: November 13, 2022
Total Price: $22.70

Used for providing power to a Mini CRT TV build.

Used for providing power to a Mini CRT TV build.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

BST-FWAA_AA-LIION_MP3432_HDR_DAC_v1.1

author: thefreeman
Top
Bottom

4 layer board of 0.71 x 0.71 inches (18.0 x 18.0 mm)
Uploaded: November 12, 2022
Shared: November 12, 2022
Total Price: $5.00

For personal use only.

For personal use only.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Adder - main 1.0

author: Len
Top
Bottom

2 layer board of 1.74 x 4.11 inches (44.2 x 104.4 mm)
Uploaded: September 22, 2022
Shared: November 12, 2022
Total Price: $35.75

Precision Adder / Unity-Gain Mixer main PCB version 1.0

Precision Adder / Unity-Gain Mixer main PCB version 1.0

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Adder - controls 1.0

author: Len
Top
Bottom

2 layer board of 0.79 x 4.26 inches (20.0 x 108.2 mm)
Uploaded: September 22, 2022
Shared: November 12, 2022
Total Price: $16.75

Precision Adder / Unity-Gain Mixer controls PCB version 1.0

Precision Adder / Unity-Gain Mixer controls PCB version 1.0

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Adder - panel 1.0

author: Len
Top
Bottom

2 layer board of 0.80 x 5.07 inches (20.2 x 128.7 mm)
Uploaded: September 22, 2022
Shared: November 12, 2022
Total Price: $20.15

Precision Adder / Unity-Gain Mixer front panel PCB version 1.0

Holes only. No pads, no tracks.

Precision Adder / Unity-Gain Mixer front panel PCB version 1.0

Holes only. No pads, no tracks.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

TBSAdapter_V1.0

author: Qrome
Top
Bottom

2 layer board of 0.94 x 0.75 inches (23.8 x 19.0 mm)
Uploaded: September 12, 2022
Shared: November 12, 2022
Total Price: $3.50

This is the adapter for the TBS Nano Rx for Tracer and Crossfire.

This is the adapter for the TBS Nano Rx for Tracer and Crossfire.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Gerber_PCB_RF replacement 8 PIN

author: the_crayon_king
Top
Bottom

2 layer board of 2.72 x 1.33 inches (69.1 x 33.8 mm)
Uploaded: November 12, 2022
Shared: November 12, 2022
Total Price: $18.10

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

makeSkyBluer_ESP32-S2

author: off-gridJack
Top
Bottom

2 layer board of 3.14 x 1.66 inches (79.7 x 42.2 mm)
Uploaded: November 08, 2022
Shared: November 11, 2022
Total Price: $26.00

upgrade the MakeSkyBlue and PowMr solar charge controllers..

upgrade the MakeSkyBlue and PowMr solar charge controllers..

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

CN12toUSB Power Helper

author: herzmx
Top
Bottom

2 layer board of 0.82 x 0.65 inches (20.9 x 16.6 mm)
Uploaded: November 11, 2022
Shared: November 11, 2022
Total Price: $2.65

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

NAOMI CF Board Adapter

author: herzmx
Top
Bottom

2 layer board of 2.07 x 0.78 inches (52.5 x 19.9 mm)
Uploaded: November 11, 2022
Shared: November 11, 2022
Total Price: $8.10

This NAOMI CF adapter is created based on https://wiki.pcbotaku.com/wiki/Sega_CF_box.

The adapter takes pinout of SCSI port on NAOMI and IDE/ATA pinout to use with CF to IDE 40 adapters, like:

https://es.aliexpress.com/item/4000295725109.html

Only change JP2 to right side (3.3v) in CF Adapter

This NAOMI CF adapter is created based on https://wiki.pcbotaku.com/wiki/Sega_CF_box.

The adapter takes pinout of SCSI port on NAOMI and IDE/ATA pinout to use with CF to IDE 40 adapters, like:

https://es.aliexpress.com/item/4000295725109.html

Only change JP2 to right side (3.3v) in CF Adapter

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

4030109

author: gvisser
Top
Bottom

2 layer board of 1.14 x 1.97 inches (29.1 x 50.0 mm)
Uploaded: November 11, 2022
Shared: November 11, 2022
Total Price: $11.25

prototype charge sensitive amplifier for BL3 experiment's proton detector

prototype charge sensitive amplifier for BL3 experiment's proton detector

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

encoder board

author: msoric
Top
Bottom

2 layer board of 2.37 x 2.37 inches (60.1 x 60.1 mm)
Uploaded: January 17, 2019
Shared: November 11, 2022
Total Price: $28.00

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Encoder Board

author: msoric
Top
Bottom

2 layer board of 1.57 x 1.78 inches (40.0 x 45.2 mm)
Uploaded: January 22, 2019
Shared: November 11, 2022
Total Price: $13.95

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Level_shifter_2

author: JT-Mcguire-Aurora
Top
Bottom

2 layer board of 1.67 x 0.44 inches (42.5 x 11.2 mm)
Uploaded: November 09, 2022
Shared: November 11, 2022
Total Price: $3.65

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project
Whaleshark white
© Copyright 2025 OSH Park, LLC | Privacy