SOIC-DIP14 adapter top board, v0.2
author: Smugrik
2 layer board of 0.70 x 0.42 inches (17.8 x 10.7 mm)
Uploaded:
July 09, 2015
Shared:
July 09, 2015
Total Price:
$1.45
An adapter to fit a Soic14 IC in a Dip14 socket
You also need the bottom board
An adapter to fit a Soic14 IC in a Dip14 socket
You also need the bottom board
Femtoduino USB, r14.2
author: femtoduino
4 layer board of 0.82 x 0.60 inches (20.7 x 15.3 mm)
Uploaded:
May 07, 2015
Shared:
July 09, 2015
Total Price:
$4.80
Smallest Arduino UNO compatible, with built in FTDI chip for USB support.
Smallest Arduino UNO compatible, with built in FTDI chip for USB support.
Femtoduino
author: femtoduino
2 layer board of 0.82 x 0.60 inches (20.8 x 15.3 mm)
Uploaded:
October 12, 2012
Shared:
July 09, 2015
Total Price:
$2.45
Femtoduino board
Femtoduino board
Femtoduino Breakout Shield
author: femtoduino
2 layer board of 1.47 x 0.97 inches (37.2 x 24.5 mm)
Uploaded:
February 16, 2013
Shared:
July 09, 2015
Total Price:
$7.05
Breakout shield for the Femtoduino
Breakout shield for the Femtoduino
FemtoUSB, r1.0.2
author: femtoduino
4 layer board of 0.82 x 0.60 inches (20.7 x 15.3 mm)
Uploaded:
March 06, 2015
Shared:
July 09, 2015
Total Price:
$4.80
Atmel SAMD21E18A ARM Cortex M0+
Atmel SAMD21E18A ARM Cortex M0+
Cro-Magnon
author: mmolteratx
4 layer board of 2.48 x 1.49 inches (62.9 x 37.8 mm)
Uploaded:
June 21, 2014
Shared:
July 09, 2015
Total Price:
$36.80
Clone of the Oddfellow Caveman Drive
Schematic: https://dl.dropboxusercontent.com/u/8021347/Caveman.png
Clone of the Oddfellow Caveman Drive
Schematic: https://dl.dropboxusercontent.com/u/8021347/Caveman.png
Optocpoupler - PC817
author: Ruben
2 layer board of 1.17 x 1.02 inches (29.6 x 25.8 mm)
Uploaded:
July 09, 2015
Shared:
July 09, 2015
Total Price:
$5.90
Simple optocoupler board using 5 PC817-optocouplers, 5 300 ohm 0805 resistors and 5 1k Ohm 0805 resistors
Simple optocoupler board using 5 PC817-optocouplers, 5 300 ohm 0805 resistors and 5 1k Ohm 0805 resistors
Kiibohd Tag-Connect SWD Adapter
author: HaaTa
2 layer board of 1.50 x 0.70 inches (38.2 x 17.9 mm)
Uploaded:
June 10, 2015
Shared:
July 09, 2015
Total Price:
$5.25
Tag-Connect to Bus Pirate Adapter - Compatible with Segger JLink Needle Adapter
Tag-Connect to Bus Pirate Adapter - Compatible with Segger JLink Needle Adapter
32 Channel Input Board
author: geneb
2 layer board of 1.94 x 1.95 inches (49.2 x 49.5 mm)
Uploaded:
July 08, 2015
Shared:
July 08, 2015
Total Price:
$18.85
Goes with the Pro Micro Interface for making a 6 axis, 32 button joystick interface.
Goes with the Pro Micro Interface for making a 6 axis, 32 button joystick interface.
DAC and Amp Power Supply
author: testep02
2 layer board of 3.45 x 3.20 inches (87.6 x 81.3 mm)
Uploaded:
July 06, 2015
Shared:
July 08, 2015
Total Price:
$55.15
Logic and Analog power supply with positive and negative rails.
Logic and Analog power supply with positive and negative rails.
POS and NEG PSU for amplifier
author: testep02
2 layer board of 3.10 x 1.55 inches (78.6 x 39.4 mm)
Uploaded:
July 06, 2015
Shared:
July 08, 2015
Total Price:
$24.00
Selectable voltages of 12V and 15V. Ultra-low noise LDO regulators.
Selectable voltages of 12V and 15V. Ultra-low noise LDO regulators.
Sharp Memory Breakout
author: harrisonhjones
2 layer board of 0.85 x 0.55 inches (21.6 x 14.0 mm)
Uploaded:
April 11, 2015
Shared:
July 08, 2015
Total Price:
$2.30
Sharp Memory Breakout Rev3
Sharp Memory Breakout Rev3
Esp07 Tool
author: CuriousTech
2 layer board of 1.27 x 1.33 inches (32.3 x 33.8 mm)
Uploaded:
June 23, 2015
Shared:
July 08, 2015
Total Price:
$8.45
Rev 1 ESP07/12 breakout w/serial, standalone, or powered serial interface.
Eagle files and pics
Rev 1 ESP07/12 breakout w/serial, standalone, or powered serial interface.
Eagle files and pics
HM50SMD_C_V6
author: JohnB
2 layer board of 3.90 x 1.80 inches (99.1 x 45.8 mm)
Uploaded:
July 08, 2015
Shared:
July 08, 2015
Total Price:
$35.10
Raspberry Pi B+ version only SMD. Designed by Peter F. Based on the design by John B. This is version of the Heatermeter that can be used with a Rpi B+. This board is not for the first timer and requires some knowledge of SMD soldering.
Raspberry Pi B+ version only SMD. Designed by Peter F. Based on the design by John B. This is version of the Heatermeter that can be used with a Rpi B+. This board is not for the first timer and requires some knowledge of SMD soldering.
