Shared Projects by Mooper

Shared Projects by Mooper

Power on/low battery indicator V3

Top
Bottom

2 layer board of 0.45 x 0.38 inches (11.4 x 9.7 mm)
Uploaded: February 29, 2016
Shared: February 29, 2016
Total Price: $0.85

Based on daftmike’s low battery indicator mk2.

Parts list: <http://www.digikey.com/short/335zvz>

Based on daftmike’s low battery indicator mk2.

Parts list: <http://www.digikey.com/short/335zvz>

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Power on/low battery indicator V2

Top
Bottom

2 layer board of 0.56 x 0.51 inches (14.1 x 12.9 mm)
Uploaded: February 29, 2016
Shared: February 29, 2016
Total Price: $1.40

Based on daftmike’s low battery indicator mk2.

Parts list: <http://www.digikey.com/short/335zwm>

Based on daftmike’s low battery indicator mk2.

Parts list: <http://www.digikey.com/short/335zwm>

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Pam8403 Audio amp

Top
Bottom

2 layer board of 1.49 x 0.69 inches (37.8 x 17.5 mm)
Uploaded: February 06, 2016
Shared: February 27, 2016
Total Price: $5.10

with volume control and switching headphone jack.

Input voltage: 2.5 to 5.5

Jump R3 & R6 to use the full power of the amp, otherwise use the 2 voltage dividers R3-R4 & R5-R6 to lower the inputs. Useful for lower wattage speakers or to prevent distortion.

The 10k resistors under the vol…

Show full description

with volume control and switching headphone jack.

Input voltage: 2.5 to 5.5

Jump R3 & R6 to use the full power of the amp, otherwise use the 2 voltage dividers R3-R4 & R5-R6 to lower the inputs. Useful for lower wattage speakers or to prevent distortion.

The 10k resistors under the vol…

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Wasp SD card replacement + SDGecko

Top
Bottom

2 layer board of 3.02 x 1.26 inches (76.6 x 31.9 mm)
Uploaded: February 13, 2016
Shared: February 14, 2016
Total Price: $18.90

Based on Bentomo's micro SD wasp replacement: <https://oshpark.com/shared_projects/FhOnpaqE>

BOM: <http://www.digikey.com/short/3tnb4w>

Based on Bentomo's micro SD wasp replacement: <https://oshpark.com/shared_projects/FhOnpaqE>

BOM: <http://www.digikey.com/short/3tnb4w>

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Power on/low battery indicator

Top
Bottom

2 layer board of 0.63 x 0.73 inches (15.9 x 18.4 mm)
Uploaded: July 24, 2015
Shared: July 24, 2015
Total Price: $2.25

Based on daftmike's low battery indicator mk2.
Parts list: <http://www.digikey.com/short/t3081n>

SMD LEDs can be soldered directly or other LEDs can be wired to the pads.

Based on daftmike's low battery indicator mk2.
Parts list: <http://www.digikey.com/short/t3081n>

SMD LEDs can be soldered directly or other LEDs can be wired to the pads.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project
Whaleshark white
© Copyright 2025 OSH Park, LLC | Privacy