5V switching regulator
author: DonBindner
2 layer board of 1.66 x 1.48 inches (42.1 x 37.6 mm)
Uploaded:
June 22, 2015
Shared:
June 22, 2015
Total Price:
$12.25
Provides 5V power for devices.
Provides 5V power for devices.
Musicbox Interface rev0
author: julbouln
2 layer board of 1.50 x 1.50 inches (38.1 x 38.1 mm)
Uploaded:
May 14, 2015
Shared:
June 21, 2015
Total Price:
$11.25
MIDI autonomous music box
MIDI autonomous music box
Musicbox rev0
author: julbouln
2 layer board of 3.00 x 2.00 inches (76.2 x 50.8 mm)
Uploaded:
May 14, 2015
Shared:
June 21, 2015
Total Price:
$30.00
MIDI autonomous music box
MIDI autonomous music box
usbpcb
author: lamloei.com
2 layer board of 0.70 x 0.60 inches (17.8 x 15.3 mm)
Uploaded:
June 19, 2015
Shared:
June 20, 2015
Total Price:
$2.10
7cm*6cm usb to dip pcb
7cm*6cm usb to dip pcb
CopterAlarm v1.1
author: Airic-Lenz
2 layer board of 1.47 x 0.61 inches (37.3 x 15.6 mm)
Uploaded:
June 19, 2015
Shared:
June 19, 2015
Total Price:
$4.50
An audible alarm that goes off when the RX send no signal any longer (on disconnect or failsafe). Connects to the batteries balancing port.
An audible alarm that goes off when the RX send no signal any longer (on disconnect or failsafe). Connects to the batteries balancing port.
Tj Monitor Rev 1.0
author: cheehieu
2 layer board of 0.61 x 0.55 inches (15.5 x 13.9 mm)
Uploaded:
February 08, 2014
Shared:
June 19, 2015
Total Price:
$1.65
A small daughter card for monitoring the junction temperature of a remote thermal diode.
A small daughter card for monitoring the junction temperature of a remote thermal diode.
Good Button
author: ASpaulding
2 layer board of 0.95 x 0.95 inches (24.1 x 24.1 mm)
Uploaded:
June 19, 2015
Shared:
June 19, 2015
Total Price:
$4.50
AtMega32u4 board with I2C and two analog inputs.
AtMega32u4 board with I2C and two analog inputs.
TB67B0008.v03
author: PeskyProducts
2 layer board of 0.71 x 0.51 inches (17.9 x 12.8 mm)
Uploaded:
June 17, 2015
Shared:
June 19, 2015
Total Price:
$1.75
Test board for Toshiba’s BLDC motor controller. Added GND vias, moved caps slightly. Added GND vias on EPAD.
Test board for Toshiba’s BLDC motor controller. Added GND vias, moved caps slightly. Added GND vias on EPAD.
DRV8836 breakout
author: ALKR
2 layer board of 0.52 x 0.62 inches (13.2 x 15.8 mm)
Uploaded:
April 22, 2015
Shared:
June 19, 2015
Total Price:
$1.60
breakout board for DRV8836 see https://hackaday.io/project/5753-drv8836-breakout
breakout board for DRV8836 see https://hackaday.io/project/5753-drv8836-breakout
BA662 Clone with DC offset Trimmer
author: Altitude909
2 layer board of 0.86 x 0.39 inches (21.9 x 9.8 mm)
Uploaded:
June 19, 2015
Shared:
June 19, 2015
Total Price:
$1.65
Clone of the BA662 OTA use in old Roland Machines. I've added a trimmer and resistor to trim off the DC offset like on the SH-101 PCB. Interestingly enough, those parts were never populated on the SH-101 (probably cheaper to bin the parts for offset). This is the same mod that I documented for…
Show full description
Clone of the BA662 OTA use in old Roland Machines. I've added a trimmer and resistor to trim off the DC offset like on the SH-101 PCB. Interestingly enough, those parts were never populated on the SH-101 (probably cheaper to bin the parts for offset). This is the same mod that I documented for…
Show full description
