Shared Projects by Pooleo

An open source PCB for GE’s NSR020A0X43Z NAOS Raptor 20 amp fitted for a Hammond 1590g enclosure. Initial testing of the early design completed. Tweaks have been made to correct the fuse footprints and voltmeter inputs to better accommodate an .28 inch meter. Be sure to use a little kapton tape over via holes beside negative side battery clip or you will have arcing and a risk for mod failure. Thank you Facebook modding community. Parts list: http://www.digikey.com/short/7rt277 https://oshpark.com/shared_projects/oEGEt8uA

An open source PCB for GE’s NSR020A0X43Z NAOS Raptor 20 amp fitted for a Hammond 1590g enclosure. This PCB is based on earlier working versions, but has not been tested. Tweaks have been made to correct the fuse footprints and correct any arcing issues. A different zener diode has been added to ease installation and the voltmeter inputs have been removed. Use this link to get the parts list: (http://www.digikey.com/short/7wfhpw) Thank you Facebook modding community.