Raspberry Pi 3 Bare Metal Dev HAT (Rev. B)
2 layer board of 2.57 x 2.23 inches (65.2 x 56.7 mm)
Uploaded:
July 29th 2018
Shared:
July 29th 2018
Total Price:
$28.60
Source design files at github.com/apparentlymart/raspi-jtag-hat.
Source design files at github.com/apparentlymart/raspi-jtag-hat.
Raspberry Pi 3 Bare Metal Dev HAT (Rev. A)
2 layer board of 2.57 x 2.23 inches (65.2 x 56.7 mm)
Uploaded:
July 28th 2018
Shared:
July 28th 2018
Total Price:
$28.60
Source design files at github.com/apparentlymart/raspi-jtag-hat.
Source design files at github.com/apparentlymart/raspi-jtag-hat.
68k Computer CPU Board v0.1
4 layer board of 3.10 x 2.50 inches (78.8 x 63.6 mm)
Uploaded:
September 6th 2015
Shared:
September 6th 2015
Total Price:
$77.70
This board is intended to stack on top of a Mojo FPGA development board (v2 or v3) and connect to it a 68SEC000 CPU.
This is the first part part of a multi-part project to slowly build a DIY computer based on the 68SEC000 CPU, using an FPGA to implement an MMU and graphics adapter.
This board is intended to stack on top of a Mojo FPGA development board (v2 or v3) and connect to it a 68SEC000 CPU.
This is the first part part of a multi-part project to slowly build a DIY computer based on the 68SEC000 CPU, using an FPGA to implement an MMU and graphics adapter.
QFP Breadboard Breakout
2 layer board of 1.14 x 2.45 inches (29.1 x 62.2 mm)
Uploaded:
March 8th 2015
Shared:
September 6th 2015
Total Price:
$14.00
Breakout board for QFP ICs.
This design allows QFP packages of up to 48 pins to be broken out to 0.1" header. The specially-designed chip footprint supports smaller pin counts via elongated pads that extend through the underside of the chip.
The board is two-sided; one side accepts 0.8mm pi…
Show full description
Breakout board for QFP ICs.
This design allows QFP packages of up to 48 pins to be broken out to 0.1" header. The specially-designed chip footprint supports smaller pin counts via elongated pads that extend through the underside of the chip.
The board is two-sided; one side accepts 0.8mm pi…
Show full description
