Shared Projects

Shared Projects

2 layer 4 layer 6 layer
Filter PCB layers

Rx5808 fpv receiver V1.1

author: spikey
Top
Bottom

2 layer board of 1.59 x 1.50 inches (40.3 x 38.1 mm)
Uploaded: December 13, 2015
Shared: February 10, 2016
Total Price: $11.90

Same as previous, just a bit smaller. FPV receiver, based on rx5808 PRO.
unmodded rx5808 from ebay

Modded rx5805 Module is …

Show full description

Same as previous, just a bit smaller. FPV receiver, based on rx5808 PRO.
unmodded rx5808 from ebay

Modded rx5805 Module is …

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

stm32-tiny042-v2

author: dword1511
Top
Bottom

2 layer board of 0.94 x 0.62 inches (23.9 x 15.8 mm)
Uploaded: January 21, 2016
Shared: February 10, 2016
Total Price: $2.90

Tiny STM32F042 USB board version 2, with PA0-PA7, PF0 & PF1 broken out and dual LEDs. Uses LP5907 LDO or other LDOs that has NC on BP pin.

Tiny STM32F042 USB board version 2, with PA0-PA7, PF0 & PF1 broken out and dual LEDs. Uses LP5907 LDO or other LDOs that has NC on BP pin.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

ShutterDriverV2.3.1

author: ZSSJQI
Top
Bottom

2 layer board of 2.65 x 1.35 inches (67.3 x 34.3 mm)
Uploaded: February 09, 2016
Shared: February 09, 2016
Total Price: $17.85

Hard drive shutter driver

Hard drive shutter driver

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Fibre-Rs232 for Pi Zero / Raspberry Pi

author: Extreme-Electronics
Top
Bottom

2 layer board of 1.56 x 0.88 inches (39.7 x 22.2 mm)
Uploaded: January 25, 2016
Shared: February 09, 2016
Total Price: $6.80

Avago Fibre 1Mb/s to 3v3 or 5V RS232 for Pi Zero or Raspberry PI

Some issues with the board take a look at extelec.uk/frs for details

Avago Fibre 1Mb/s to 3v3 or 5V RS232 for Pi Zero or Raspberry PI

Some issues with the board take a look at extelec.uk/frs for details

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

VESC 4.12

author: erwincoumans
Top
Bottom

4 layer board of 1.52 x 2.57 inches (38.7 x 65.2 mm)
Uploaded: February 09, 2016
Shared: February 09, 2016
Total Price: $39.00

https://github.com/vedderb/bldc-hardware

https://github.com/vedderb/bldc-hardware

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Pi Attenuator (0805)

author: SyncChannelBlog
Top
Bottom

2 layer board of 0.80 x 0.50 inches (20.3 x 12.7 mm)
Uploaded: February 09, 2016
Shared: February 09, 2016
Total Price: $2.00

This version uses 0805 resistors.

<http://syncchannel.blogspot.com/2016/02/quick-pcb-pi-attenuator.html>

This version uses 0805 resistors.

<http://syncchannel.blogspot.com/2016/02/quick-pcb-pi-attenuator.html>

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

ShutterDriveV2.3

author: ZSSJQI
Top
Bottom

2 layer board of 2.65 x 1.35 inches (67.3 x 34.3 mm)
Uploaded: February 09, 2016
Shared: February 09, 2016
Total Price: $17.85

Hard drive shutter driver

Hard drive shutter driver

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Valentine's Heart

author: Serge
Top
Bottom

2 layer board of 1.57 x 1.45 inches (39.8 x 36.8 mm)
Uploaded: January 08, 2014
Shared: February 09, 2016
Total Price: $11.35

Valentine's Heart - Version 1

Valentine's Heart - Version 1

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

STorM32 NT imu v10 mini-mpu9250

author: davidbitton
Top
Bottom

2 layer board of 0.55 x 0.79 inches (14.0 x 20.0 mm)
Uploaded: November 20, 2015
Shared: February 09, 2016
Total Price: $2.15

STorM32 NT imu v10 mini-mpu9250

STorM32 NT imu v10 mini-mpu9250

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

STorM32 NT splitter v10

author: davidbitton
Top
Bottom

2 layer board of 0.29 x 0.52 inches (7.5 x 13.2 mm)
Uploaded: November 20, 2015
Shared: February 09, 2016
Total Price: $0.75

STorM32 NT splitter v10

STorM32 NT splitter v10

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Arduino ISP (FTDI compliant)

author: wallerron
Top
Bottom

4 layer board of 0.66 x 0.71 inches (16.7 x 18.0 mm)
Uploaded: July 15, 2015
Shared: February 09, 2016
Total Price: $4.60

Uno bootloader + Arduino ISP sketch.

BOM :

> LED (#ERR): 1206 Red

> LED (PROG): 1206 Green

> LED (HEARTBEAT): 1206 Blue

> ATmega328P-AU: TQFP-32

> R1-R3: 100-1000 Ohm (depends on how strong light you want)

> 1x6 Female pins 0.1"

> 1x6 Male pins 0.1"

> RESET (button):…

Show full description

Uno bootloader + Arduino ISP sketch.

BOM :

> LED (#ERR): 1206 Red

> LED (PROG): 1206 Green

> LED (HEARTBEAT): 1206 Blue

> ATmega328P-AU: TQFP-32

> R1-R3: 100-1000 Ohm (depends on how strong light you want)

> 1x6 Female pins 0.1"

> 1x6 Male pins 0.1"

> RESET (button):…

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Chess timer - display board

author: Sajidvk
Top
Bottom

2 layer board of 3.82 x 1.12 inches (97.0 x 28.4 mm)
Uploaded: January 01, 2014
Shared: February 09, 2016
Total Price: $21.25

A timer with two time displays for timed two player games such as Chess, Go,etc

A timer with two time displays for timed two player games such as Chess, Go,etc

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

ATTiny HVSP rev 0.1

author: Sajidvk
Top
Bottom

2 layer board of 1.02 x 2.12 inches (25.8 x 53.8 mm)
Uploaded: January 12, 2014
Shared: February 09, 2016
Total Price: $10.75

This ATTiny High Voltage Serial Programmer can be mounter on a Arduino Uno or other Arduino’s with similar pin layout. This is based on the programmer described in page http://www.rickety.us/2010/03/arduino-avr-high-voltage-serial-programmer/

This ATTiny High Voltage Serial Programmer can be mounter on a Arduino Uno or other Arduino’s with similar pin layout. This is based on the programmer described in page http://www.rickety.us/2010/03/arduino-avr-high-voltage-serial-programmer/

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Bike Tail Light Circuit board

author: Sajidvk
Top
Bottom

2 layer board of 2.64 x 0.62 inches (67.1 x 15.6 mm)
Uploaded: February 18, 2014
Shared: February 09, 2016
Total Price: $8.10

Science Fair Project - A Bike tail light that turns on automatically when it is dark

Science Fair Project - A Bike tail light that turns on automatically when it is dark

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Chess timer - Controller board

author: Sajidvk
Top
Bottom

2 layer board of 3.82 x 1.12 inches (96.9 x 28.4 mm)
Uploaded: January 01, 2014
Shared: February 09, 2016
Total Price: $21.25

Controller board for the chess timer - two player timer for games such as Chess, Go, etc..

Controller board for the chess timer - two player timer for games such as Chess, Go, etc..

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Reversible Breadboard LEDs

author: serisman
Top
Bottom

2 layer board of 0.30 x 0.40 inches (7.7 x 10.3 mm)
Uploaded: February 09, 2016
Shared: February 09, 2016
Total Price: $0.60

$0.20 each ($0.60 for 3)

Pick a side (sourcing or sinking), and install the 3 leds (SMD 0805) on the top side with the indicated orientation.

Install current limiting resistors (SMD 0805) and pin headers on the bottom side.

Note, the VCC / GND pins are already tied together.

$0.20 each ($0.60 for 3)

Pick a side (sourcing or sinking), and install the 3 leds (SMD 0805) on the top side with the indicated orientation.

Install current limiting resistors (SMD 0805) and pin headers on the bottom side.

Note, the VCC / GND pins are already tied together.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Mini Star

author: ronp5683
Top
Bottom

2 layer board of 3.22 x 3.37 inches (81.8 x 85.5 mm)
Uploaded: February 09, 2016
Shared: February 09, 2016
Total Price: $54.15

Mini Star with WS2812B pixel chips

Mini Star with WS2812B pixel chips

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Crystal Breadboard Breakout

author: serisman
Top
Bottom

2 layer board of 0.30 x 0.25 inches (7.7 x 6.4 mm)
Uploaded: February 09, 2016
Shared: February 09, 2016
Total Price: $0.35

$0.12 each ($0.35 for 3)

Designed to match up with the GND, XTAL1, and XTAL2 pins of the Atmel ATmega series.

Install the appropriate load capacitors (~22pF - SMD 0805) on the bottom side.

$0.12 each ($0.35 for 3)

Designed to match up with the GND, XTAL1, and XTAL2 pins of the Atmel ATmega series.

Install the appropriate load capacitors (~22pF - SMD 0805) on the bottom side.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

teensy dynamixel buffer

author: ggarime1
Top
Bottom

2 layer board of 0.80 x 1.71 inches (20.3 x 43.4 mm)
Uploaded: February 02, 2016
Shared: February 08, 2016
Total Price: $6.80

Half Duplex to Full Duplex converter for Teensy Arduino

Half Duplex to Full Duplex converter for Teensy Arduino

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

rotor.brd

author: anilinfotek
Top
Bottom

2 layer board of 2.97 x 1.77 inches (75.4 x 45.0 mm)
Uploaded: December 29, 2015
Shared: February 08, 2016
Total Price: $26.30

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project
Whaleshark white
© Copyright 2026 OSH Park, LLC | Privacy