Shared Projects by jschnurr

Shared Projects by jschnurr

Breakout - 5V boost and Li-ion Fuel Gauge

Top
Bottom

2 layer board of 0.49 x 0.53 inches (12.4 x 13.4 mm)
Uploaded: July 25, 2016
Shared: July 25, 2016
Total Price: $1.25

5V boost circuit and Li-ion Fuel Gauge Breakout. Top side is a breakout for TPS61220 Boost converter with optional space for an 0805 resistor and LED. Bottom side is a Breakout Board for the LC709203F Li-ion Fuel Gauge.

5V boost circuit and Li-ion Fuel Gauge Breakout. Top side is a breakout for TPS61220 Boost converter with optional space for an 0805 resistor and LED. Bottom side is a Breakout Board for the LC709203F Li-ion Fuel Gauge.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

FPC and RTC Breakout

Top
Bottom

2 layer board of 0.52 x 1.04 inches (13.2 x 26.5 mm)
Uploaded: July 25, 2016
Shared: July 25, 2016
Total Price: $2.65

FPC and RTC Breakout. Top side is a 10-pin Breakout Board for Sharp LCD Displays. Bottom side is a Breakout Board for the PCF85263ATL RTC with an optional LED and Resistor.

FPC and RTC Breakout. Top side is a 10-pin Breakout Board for Sharp LCD Displays. Bottom side is a Breakout Board for the PCF85263ATL RTC with an optional LED and Resistor.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

GadgetWatch 1.1

Top
Bottom

4 layer board of 1.09 x 1.26 inches (27.7 x 32.0 mm)
Uploaded: February 03, 2016
Shared: February 25, 2016
Total Price: $13.60

Arduino based OLED Smart Watch. Still in early prototype stages.

Planned features include: 3 axis accelerometer - 3 axis gyroscope - 3 axis magnetometer - Temperature sensor - Humidity sensor - Barometric pressure sensor - Flashlight LED - Piezo buzzer - Vibrator motor - IR…

Show full description

Arduino based OLED Smart Watch. Still in early prototype stages.

Planned features include: 3 axis accelerometer - 3 axis gyroscope - 3 axis magnetometer - Temperature sensor - Humidity sensor - Barometric pressure sensor - Flashlight LED - Piezo buzzer - Vibrator motor - IR…

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project
Whaleshark white
© Copyright 2025 OSH Park, LLC | Privacy