Shared Projects

Shared Projects

2 layer 4 layer 6 layer
Filter PCB layers

Xdrip PCB Lipo Board V2.1 (new version)

author: mzst
Top
Bottom

2 layer board of 1.56 x 0.87 inches (39.6 x 22.0 mm)
Uploaded: March 02, 2016
Shared: March 31, 2016
Total Price: $6.75

Check it out on Github Here

The MAX1811 Charger IC is set to 500mah. Only use a battery with more than 500mah

Components:

  • 3x 1206 SMD Resitors (150Ω, 10kΩ, 27kΩ)

  • 1x 1206 Red LED (any led should work)

  • 2x 1206 SMD Capaci…

Show full description

Check it out on Github Here

The MAX1811 Charger IC is set to 500mah. Only use a battery with more than 500mah

Components:

  • 3x 1206 SMD Resitors (150Ω, 10kΩ, 27kΩ)

  • 1x 1206 Red LED (any led should work)

  • 2x 1206 SMD Capaci…

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

gb

author: herladen
Top
Bottom

2 layer board of 2.01 x 0.99 inches (51.1 x 25.0 mm)
Uploaded: March 30, 2016
Shared: March 30, 2016
Total Price: $9.90

gb

gb

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

TEST: Beagle Entertainment System cape for BeagleBone

author: fustini
Top
Bottom

2 layer board of 2.16 x 2.83 inches (54.7 x 71.9 mm)
Uploaded: March 30, 2016
Shared: March 30, 2016
Total Price: $30.50

BESCape by Andrew Henderson. Beagle Entertainment System cape for BeagleBone: http://beaglesnes.sourceforge.net/ GitHub repo: https://github.com/hendersa/bescape

BESCape by Andrew Henderson. Beagle Entertainment System cape for BeagleBone: http://beaglesnes.sourceforge.net/ GitHub repo: https://github.com/hendersa/bescape

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

MicroBit Robot Interface Board RevC

author: AndrewIC
Top
Bottom

2 layer board of 3.17 x 1.57 inches (80.4 x 39.8 mm)
Uploaded: March 30, 2016
Shared: March 30, 2016
Total Price: $24.80

Connect 5V sensors to the micro:bit

Connect 5V sensors to the micro:bit

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Shunt Bias Power Supply V1.2

author: bax
Top
Bottom

2 layer board of 4.00 x 1.80 inches (101.6 x 45.7 mm)
Uploaded: March 08, 2016
Shared: March 30, 2016
Total Price: $36.00

Shunt bias power supply

Shunt bias power supply

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Shunt Bias Regulator V1.2

author: bax
Top
Bottom

2 layer board of 2.40 x 1.70 inches (61.0 x 43.2 mm)
Uploaded: March 30, 2016
Shared: March 30, 2016
Total Price: $20.40

shunt regulator for tube bias supply

shunt regulator for tube bias supply

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

ramps-fd3

author: quixotic120
Top
Bottom

2 layer board of 6.32 x 5.22 inches (160.4 x 132.5 mm)
Uploaded: March 30, 2016
Shared: March 30, 2016
Total Price: $164.65

ramps-fd variant; untested

https://github.com/quixotic120/RAMPS-FD3

ramps-fd variant; untested

https://github.com/quixotic120/RAMPS-FD3

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

ATtiny45/85 Programmer 3mm LEDs V2

author: DanR
Top
Bottom

2 layer board of 2.70 x 2.10 inches (68.6 x 53.3 mm)
Uploaded: March 30, 2016
Shared: March 30, 2016
Total Price: $28.30

For those who prefer 3mm LED’s instead of 5mm.

The recommended capacitor is a 10µF polarized capacitor.

Arduino Uno shield for programming the ATtiny45 and ATtiny85 through hole ICs, with breakout headers and a test LED to use with the blink arduino example, though you must set the LED pi…

Show full description

For those who prefer 3mm LED’s instead of 5mm.

The recommended capacitor is a 10µF polarized capacitor.

Arduino Uno shield for programming the ATtiny45 and ATtiny85 through hole ICs, with breakout headers and a test LED to use with the blink arduino example, though you must set the LED pi…

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

MTN-11DD

author: MTN
Top
Bottom

2 layer board of 0.44 x 0.44 inches (11.2 x 11.2 mm)
Uploaded: October 05, 2015
Shared: March 30, 2016
Total Price: $0.95

11mm Version that I forgot to share a LONG time ago with the 10/12mm versions.

11mm Version that I forgot to share a LONG time ago with the 10/12mm versions.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

MTN-SLdd v1.2

author: MTN
Top
Bottom

2 layer board of 0.48 x 0.45 inches (12.1 x 11.3 mm)
Uploaded: March 30, 2016
Shared: March 30, 2016
Total Price: $1.05

A small FET driver intended for a lot of the small twisty lights out there. Here are the differences from the other MTN-10/11/12DD drivers:

  • No copper around ground ring on component side. This makes isolating a twisty light much easier.
  • Different milled shape makes installation in a lot…

Show full description

A small FET driver intended for a lot of the small twisty lights out there. Here are the differences from the other MTN-10/11/12DD drivers:

  • No copper around ground ring on component side. This makes isolating a twisty light much easier.
  • Different milled shape makes installation in a lot…

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

RGB LED Strip Controller

author: FearedSpark
Top
Bottom

2 layer board of 2.78 x 1.31 inches (70.6 x 33.2 mm)
Uploaded: March 03, 2016
Shared: March 30, 2016
Total Price: $18.10

A small board to control intensity and color of RGB LED strips, supporting either DotStar or NeoPixel with a selection switch

Circuit Maker project: http://workspace.circuitmaker.com/Projects/E018036A-EE0F-4A8F-B97C-0EB9E18DF42C Github: https://github.com/fearedspark/RGB_LED_Strip_Controller

A small board to control intensity and color of RGB LED strips, supporting either DotStar or NeoPixel with a selection switch

Circuit Maker project: http://workspace.circuitmaker.com/Projects/E018036A-EE0F-4A8F-B97C-0EB9E18DF42C Github: https://github.com/fearedspark/RGB_LED_Strip_Controller

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

LARP

author: TreySch
Top
Bottom

2 layer board of 3.51 x 5.36 inches (89.2 x 136.2 mm)
Uploaded: March 30, 2016
Shared: March 30, 2016
Total Price: $94.10

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

LARP

author: TreySch
Top
Bottom

2 layer board of 9.84 x 7.25 inches (249.8 x 184.2 mm)
Uploaded: March 30, 2016
Shared: March 30, 2016
Total Price: $356.70

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Mars Rover

author: TreySch
Top
Bottom

2 layer board of 3.35 x 1.70 inches (85.1 x 43.2 mm)
Uploaded: March 30, 2016
Shared: March 30, 2016
Total Price: $28.45

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Mars Rover

author: TreySch
Top
Bottom

2 layer board of 5.05 x 3.71 inches (128.2 x 94.2 mm)
Uploaded: March 30, 2016
Shared: March 30, 2016
Total Price: $93.55

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

pcm2704/5 usb dac v0.001

author: bloodystumps
Top
Bottom

2 layer board of 1.99 x 2.00 inches (50.5 x 50.8 mm)
Uploaded: January 04, 2015
Shared: March 29, 2016
Total Price: $19.85

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

inverted lm3875 seattle

author: bloodystumps
Top
Bottom

2 layer board of 2.65 x 1.74 inches (67.3 x 44.3 mm)
Uploaded: September 09, 2015
Shared: March 29, 2016
Total Price: $23.05

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

toslink board

author: bloodystumps
Top
Bottom

2 layer board of 1.00 x 1.00 inches (25.4 x 25.4 mm)
Uploaded: September 23, 2015
Shared: March 29, 2016
Total Price: $5.00

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

SmartPwmV2 Breakout board

author: STBRO
Top
Bottom

2 layer board of 3.72 x 1.78 inches (94.5 x 45.2 mm)
Uploaded: March 29, 2016
Shared: March 29, 2016
Total Price: $33.10

parts list from digikey (http://www.digikey.com/short/38qvdz) still needs the (IMPORTANT> 1206 package <IMPORTANT) resistor or jumper for the LED depending on what you need for your specific set up, but this is the most current board and has been tested and fully functional

parts list from digikey (http://www.digikey.com/short/38qvdz) still needs the (IMPORTANT> 1206 package <IMPORTANT) resistor or jumper for the LED depending on what you need for your specific set up, but this is the most current board and has been tested and fully functional

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

featherHAB

author: RG
Top
Bottom

2 layer board of 0.85 x 0.95 inches (21.5 x 24.1 mm)
Uploaded: March 07, 2016
Shared: March 29, 2016
Total Price: $4.00

HAB APRS design from Ethan Zonca

HAB APRS design from Ethan Zonca

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project
Whaleshark white
© Copyright 2026 OSH Park, LLC | Privacy