Shared Projects by DanR

Shared Projects by DanR

ATtiny45 motion sensing night light V1.2 D

Top
Bottom

2 layer board of 2.69 x 2.28 inches (68.4 x 57.9 mm)
Uploaded: April 06, 2016
Shared: December 23, 2016
Total Price: $30.65

VERIFIED WORKING

This light is powered by an ATtiny45/85 which powers on the 14 LED lights when motion is sensed and it is in a dark room. The light sensor on the board will not allow the lights to come on if it is in a reasonably lit room.

It is fitted with a barrel plug for power, th…

Show full description

VERIFIED WORKING

This light is powered by an ATtiny45/85 which powers on the 14 LED lights when motion is sensed and it is in a dark room. The light sensor on the board will not allow the lights to come on if it is in a reasonably lit room.

It is fitted with a barrel plug for power, th…

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Motion Sensing Night Light V1.2 Rev E

Top
Bottom

2 layer board of 2.69 x 2.28 inches (68.4 x 57.9 mm)
Uploaded: October 02, 2016
Shared: October 02, 2016
Total Price: $30.65

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Clownface +5V DC Voltage Regulator RevC OH

Top
Bottom

2 layer board of 0.83 x 1.06 inches (21.0 x 27.0 mm)
Uploaded: May 14, 2016
Shared: September 10, 2016
Total Price: $4.35

Tested and Verified Working

EDIT: Added NEGATIVE (-) and POSITIVE (+) indicators on this design

Input voltage 7-18V

Output voltage 5V

View BOM

[MC7805 Datasheet](http://www.mouser.com/ds/2/308/MC…

Show full description

Tested and Verified Working

EDIT: Added NEGATIVE (-) and POSITIVE (+) indicators on this design

Input voltage 7-18V

Output voltage 5V

View BOM

[MC7805 Datasheet](http://www.mouser.com/ds/2/308/MC…

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

ATtiny45/85 Programmer 3mm LEDs V2

Top
Bottom

2 layer board of 2.70 x 2.10 inches (68.6 x 53.3 mm)
Uploaded: March 30, 2016
Shared: March 30, 2016
Total Price: $28.30

For those who prefer 3mm LED’s instead of 5mm.

The recommended capacitor is a 10µF polarized capacitor.

Arduino Uno shield for programming the ATtiny45 and ATtiny85 through hole ICs, with breakout headers and a test LED to use with the blink arduino example, though you must set the LED pi…

Show full description

For those who prefer 3mm LED’s instead of 5mm.

The recommended capacitor is a 10µF polarized capacitor.

Arduino Uno shield for programming the ATtiny45 and ATtiny85 through hole ICs, with breakout headers and a test LED to use with the blink arduino example, though you must set the LED pi…

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

16 LED PIR motion sensor board

Top
Bottom

2 layer board of 2.21 x 1.76 inches (56.2 x 44.8 mm)
Uploaded: December 07, 2015
Shared: March 23, 2016
Total Price: $19.45

16 LED PIR board - need to use an arduino board to run it.

16 LED PIR board - need to use an arduino board to run it.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project
Whaleshark white
© Copyright 2025 OSH Park, LLC | Privacy