MTN-SLdd v1.2
author: MTN
2 layer board of 0.48 x 0.45 inches (12.1 x 11.3 mm)
Uploaded:
March 30, 2016
Shared:
March 30, 2016
Total Price:
$1.05
A small FET driver intended for a lot of the small twisty lights out there. Here are the differences from the other MTN-10/11/12DD drivers:
- No copper around ground ring on component side. This makes isolating a twisty light much easier.
- Different milled shape makes installation in a lot of the tiny twisty / clicky lights easier with less filing.
For a clicky light, if the battery tube does not touch the driver or you can’t solder to the pill, then this is not a good choice because you will have a difficult time getting a good ground.
The regular MTN-11/12DD is much better in these scenarios due to the exposed copper on the component side of the driver.
A small FET driver intended for a lot of the small twisty lights out there. Here are the differences from the other MTN-10/11/12DD drivers:
- No copper around ground ring on component side. This makes isolating a twisty light much easier.
- Different milled shape makes installation in a lot of the tiny twisty / clicky lights easier with less filing.
For a clicky light, if the battery tube does not touch the driver or you can’t solder to the pill, then this is not a good choice because you will have a difficult time getting a good ground.
The regular MTN-11/12DD is much better in these scenarios due to the exposed copper on the component side of the driver.
