laser-driver revN
4 layer board of 1.58 x 1.58 inches (40.1 x 40.1 mm)
Uploaded:
October 20th 2020
Shared:
October 20th 2020
Total Price:
$24.80
inverts input signal to drive laser diode; amplifies photodiode signal; can be used with 0.1" spacing LED; can be mounted with 6-32 or M6 screws; fits on 16 mm or 30 mm cage system
Schematic: <https://www.phys.hawaii.edu/~mza/PCB/misc/laser-driver.revN.schematic.pdf>
inverts input signal to drive laser diode; amplifies photodiode signal; can be used with 0.1" spacing LED; can be mounted with 6-32 or M6 screws; fits on 16 mm or 30 mm cage system
Schematic: <https://www.phys.hawaii.edu/~mza/PCB/misc/laser-driver.revN.schematic.pdf>
laser-driver revP
2 layer board of 0.85 x 0.26 inches (21.7 x 6.6 mm)
Uploaded:
October 20th 2020
Shared:
October 20th 2020
Total Price:
$1.10
fits in a thorlabs SR9A cable
Schematic: <https://www.phys.hawaii.edu/~mza/PCB/misc/laser-driver.revP.schematic.pdf>
fits in a thorlabs SR9A cable
Schematic: <https://www.phys.hawaii.edu/~mza/PCB/misc/laser-driver.revP.schematic.pdf>
diff0jtag revA
2 layer board of 2.56 x 0.79 inches (65.1 x 20.1 mm)
Uploaded:
October 17th 2020
Shared:
October 17th 2020
Total Price:
$10.10
turns a rpi zero into a remote jtag programmer via LVDS/RJ45
Schematic: <https://www.phys.hawaii.edu/~mza/PCB/misc/diff0jtag.revA.schematic.pdf>
turns a rpi zero into a remote jtag programmer via LVDS/RJ45
Schematic: <https://www.phys.hawaii.edu/~mza/PCB/misc/diff0jtag.revA.schematic.pdf>
mini-fit-jr-3pos-rail revB
2 layer board of 2.45 x 0.91 inches (62.1 x 23.1 mm)
Uploaded:
October 12th 2020
Shared:
October 12th 2020
Total Price:
$11.10
power distribution (+5V/-5V) on a molex mini-fit jr 3pos connector. 3 labeled solder connections can take 16 AWG wire. Capacitors and red/green LEDs are optional.
Schematic: <https://www.phys.hawaii.edu/~mza/PCB/misc/mini-fit-jr-3pos-rail.revB.schematic.pdf>
power distribution (+5V/-5V) on a molex mini-fit jr 3pos connector. 3 labeled solder connections can take 16 AWG wire. Capacitors and red/green LEDs are optional.
Schematic: <https://www.phys.hawaii.edu/~mza/PCB/misc/mini-fit-jr-3pos-rail.revB.schematic.pdf>
jtag-zero revA
2 layer board of 0.92 x 1.10 inches (23.3 x 27.9 mm)
Uploaded:
October 10th 2020
Shared:
October 10th 2020
Total Price:
$5.00
allows a raspberry pi to act as a jtag programmer (using openocd). 3.3V targets only!
Schematic: <https://www.phys.hawaii.edu/~mza/PCB/misc/jtag-zero.revA.schematic.pdf>
allows a raspberry pi to act as a jtag programmer (using openocd). 3.3V targets only!
Schematic: <https://www.phys.hawaii.edu/~mza/PCB/misc/jtag-zero.revA.schematic.pdf>