Shared Projects by mza

Shared Projects by mza

banana-to-dragonfly04 revB

Top
Bottom

2 layer board of 1.97 x 1.18 inches (50.1 x 30.1 mm)
Uploaded: October 09, 2020
Shared: October 09, 2020
Total Price: $11.65

connects the 6 terminals of a source-measure unit (SMU) to a positronic dragonfly04 connector. Correctly surrounds force_high and sense_high with copper connected to guard terminal.

Schematic: <https://www.phys.hawaii.edu/~mza/PCB/misc/banana-to-dragonfly04.revB.schematic.pdf>

connects the 6 terminals of a source-measure unit (SMU) to a positronic dragonfly04 connector. Correctly surrounds force_high and sense_high with copper connected to guard terminal.

Schematic: <https://www.phys.hawaii.edu/~mza/PCB/misc/banana-to-dragonfly04.revB.schematic.pdf>

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

laser-driver revM

Top
Bottom

2 layer board of 0.63 x 0.87 inches (16.0 x 22.1 mm)
Uploaded: October 09, 2020
Shared: October 09, 2020
Total Price: $2.70

connects two-pin (0.1") LED to coax connector. With 50 Ohm terminator.

use 2 oz copper, 0.8mm thickness

Schematic: <https://www.phys.hawaii.edu/~mza/PCB/misc/laser-driver.revM.schematic.pdf>

connects two-pin (0.1") LED to coax connector. With 50 Ohm terminator.

use 2 oz copper, 0.8mm thickness

Schematic: <https://www.phys.hawaii.edu/~mza/PCB/misc/laser-driver.revM.schematic.pdf>

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

NIMIO-toupee revA

Top
Bottom

4 layer board of 0.97 x 0.99 inches (24.7 x 25.2 mm)
Uploaded: September 27, 2020
Shared: September 27, 2020
Total Price: $9.60

toupee (althea daughterboard) to bring in one NIM signal and to drive another one out. corresponding LEDs as well.

Schematic: <https://www.phys.hawaii.edu/~mza/PCB/althea/NIMIO-toupee.revA.schematic.pdf>

toupee (althea daughterboard) to bring in one NIM signal and to drive another one out. corresponding LEDs as well.

Schematic: <https://www.phys.hawaii.edu/~mza/PCB/althea/NIMIO-toupee.revA.schematic.pdf>

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

elton-john revA

Top
Bottom

2 layer board of 1.58 x 1.58 inches (40.1 x 40.1 mm)
Uploaded: September 26, 2020
Shared: September 26, 2020
Total Price: $12.40

3A/-1.5A dual regulator with molex mini-fit jr connectors

Schematic: <https://www.phys.hawaii.edu/~mza/PCB/misc/elton-john.revA.schematic.pdf>

3A/-1.5A dual regulator with molex mini-fit jr connectors

Schematic: <https://www.phys.hawaii.edu/~mza/PCB/misc/elton-john.revA.schematic.pdf>

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

reggie revD

Top
Bottom

2 layer board of 1.03 x 0.96 inches (26.1 x 24.4 mm)
Uploaded: September 26, 2020
Shared: September 26, 2020
Total Price: $4.90

3A regulator

Schematic: <https://www.phys.hawaii.edu/~mza/PCB/misc/reggie.revD.schematic.pdf>

3A regulator

Schematic: <https://www.phys.hawaii.edu/~mza/PCB/misc/reggie.revD.schematic.pdf>

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project
Whaleshark white
© Copyright 2025 OSH Park, LLC | Privacy