banana-to-triax revA
2 layer board of 1.88 x 1.11 inches (47.6 x 28.1 mm)
Uploaded:
March 05, 2020
Shared:
September 12, 2020
Total Price:
$10.35
Simple breakout board for a keysight B2901A source/measure unit (SMU).
Schematic: <https://www.phys.hawaii.edu/~mza/PCB/misc/banana-to-triax.revA.schematic.pdf>
Simple breakout board for a keysight B2901A source/measure unit (SMU).
Schematic: <https://www.phys.hawaii.edu/~mza/PCB/misc/banana-to-triax.revA.schematic.pdf>
banana-to-dragonfly04 revA
2 layer board of 1.88 x 1.07 inches (47.6 x 27.1 mm)
Uploaded:
March 06, 2020
Shared:
September 12, 2020
Total Price:
$10.00
Simple breakout board for a keysight B2901A source/measure unit (SMU).
Schematic: <https://www.phys.hawaii.edu/~mza/PCB/misc/banana-to-dragonfly04.revA.schematic.pdf>
Simple breakout board for a keysight B2901A source/measure unit (SMU).
Schematic: <https://www.phys.hawaii.edu/~mza/PCB/misc/banana-to-dragonfly04.revA.schematic.pdf>
laser driver revK
4 layer board of 1.58 x 1.58 inches (40.0 x 40.0 mm)
Uploaded:
March 09, 2020
Shared:
September 12, 2020
Total Price:
$24.80
Drives an inverted copy of a positive signal (from a LEMO-00 connector) into a laser diode mounted in a 30mm cage system. Also provides the photodiode output on an MMCX connector.
Schematic: <https://www.phys.hawaii.edu/~mza/PCB/misc/laser-driver.revK.schematic.pdf>
Drives an inverted copy of a positive signal (from a LEMO-00 connector) into a laser diode mounted in a 30mm cage system. Also provides the photodiode output on an MMCX connector.
Schematic: <https://www.phys.hawaii.edu/~mza/PCB/misc/laser-driver.revK.schematic.pdf>
laser driver revL
4 layer board of 0.99 x 0.99 inches (25.0 x 25.0 mm)
Uploaded:
March 09, 2020
Shared:
September 12, 2020
Total Price:
$9.70
Drives an inverted copy of a positive signal (from a LEMO-00 connector) into a laser diode mounted in a 16mm cage system. Also provides the photodiode output on an MMCX connector.
Schematic: <https://www.phys.hawaii.edu/~mza/PCB/misc/laser-driver.revL.schematic.pdf>
Drives an inverted copy of a positive signal (from a LEMO-00 connector) into a laser diode mounted in a 16mm cage system. Also provides the photodiode output on an MMCX connector.
Schematic: <https://www.phys.hawaii.edu/~mza/PCB/misc/laser-driver.revL.schematic.pdf>
6bit-pot-ADC-and-6bit-R2R-DAC revA
2 layer board of 0.96 x 1.53 inches (24.3 x 38.8 mm)
Uploaded:
May 17, 2020
Shared:
September 12, 2020
Total Price:
$7.30
Using "bonded lanes" of oserdes/iserdes channels of a spartan6, this is an attempt to get a 6 bit ADC alongside a 6 bit DAC (both at 1 GSa/s). Fits on left or right half of the pins on an althea revB.
Schematic: <https://www.phys.hawaii.edu/~mza/PCB/althea/6bit-pot-ADC-and-6bit-R2R-DAC.revA.s…
Show full description
Using "bonded lanes" of oserdes/iserdes channels of a spartan6, this is an attempt to get a 6 bit ADC alongside a 6 bit DAC (both at 1 GSa/s). Fits on left or right half of the pins on an althea revB.
Schematic: <https://www.phys.hawaii.edu/~mza/PCB/althea/6bit-pot-ADC-and-6bit-R2R-DAC.revA.s…
Show full description
