Shared Projects by mza

Shared Projects by mza

proto-DUNE-II-sareer-photodiode-array revB2

Top
Bottom

4 layer board of 3.50 x 1.25 inches (88.9 x 31.8 mm)
Uploaded: September 8th 2021
Shared: September 8th 2021
Total Price: $43.70

6x2 array of TO-39 photodiodes at 250 mil pitch (staggered), brought out to diffpairs via baluns. Includes source termination (single-ended and differential).

Schematic: https://www.phys.hawaii.edu/~mza/PCB/misc/proto-DUNE-photodiode-array.revB2.schematic.pdf

6x2 array of TO-39 photodiodes at 250 mil pitch (staggered), brought out to diffpairs via baluns. Includes source termination (single-ended and differential).

Schematic: https://www.phys.hawaii.edu/~mza/PCB/misc/proto-DUNE-photodiode-array.revB2.schematic.pdf

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

proto DUNE II sareer photodiode array revB

Top
Bottom

4 layer board of 3.50 x 1.25 inches (88.9 x 31.8 mm)
Uploaded: September 5th 2021
Shared: September 5th 2021
Total Price: $43.70

6x2 array of TO-39 photodiodes at 250 mil pitch (staggered), brought out to diffpairs via baluns.

Schematic: <https://www.phys.hawaii.edu/~mza/PCB/misc/proto-DUNE-photodiode-array.revB.schematic.pdf>

6x2 array of TO-39 photodiodes at 250 mil pitch (staggered), brought out to diffpairs via baluns.

Schematic: <https://www.phys.hawaii.edu/~mza/PCB/misc/proto-DUNE-photodiode-array.revB.schematic.pdf>

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

althea revBLM

Top
Bottom

4 layer board of 2.56 x 1.57 inches (65.0 x 40.0 mm)
Uploaded: August 25th 2021
Shared: August 25th 2021
Total Price: $40.20

spartan6 lx9 FPGA board that interfaces with a raspberry pi. Has 6 coax inouts, 12 LEDs, a STEMMA QT / QWIIC connector, a pushbutton, a JTAG connector, a hexadecimal rotary switch and room for expansion (via a toupee connector: two 3x8 pin 0.1" headers).

Schematic: https://www.phys.hawaii.edu/…

Show full description

spartan6 lx9 FPGA board that interfaces with a raspberry pi. Has 6 coax inouts, 12 LEDs, a STEMMA QT / QWIIC connector, a pushbutton, a JTAG connector, a hexadecimal rotary switch and room for expansion (via a toupee connector: two 3x8 pin 0.1" headers).

Schematic: https://www.phys.hawaii.edu/…

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

illuminati revB

Top
Bottom

4 layer board of 2.09 x 1.06 inches (53.0 x 27.0 mm)
Uploaded: June 17th 2021
Shared: June 17th 2021
Total Price: $22.10

inverts input signal to drive 1206 led; amplifies the reflection via a temd1020 photodiode

inverts input signal to drive 1206 led; amplifies the reflection via a temd1020 photodiode

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

illuminati revA

Top
Bottom

2 layer board of 2.09 x 1.06 inches (53.0 x 27.0 mm)
Uploaded: June 16th 2021
Shared: June 16th 2021
Total Price: $11.05

stimulates a sensor with a 1206 led plus reads back the reflection via a temd1020 photodiode

stimulates a sensor with a 1206 led plus reads back the reflection via a temd1020 photodiode

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project
Whaleshark white
© Copyright 2024 Oshpark LLC