CEC Condom
author: tom66
4 layer board of 0.86 x 0.75 inches (21.9 x 19.0 mm)
Uploaded:
May 09, 2016
Shared:
May 09, 2016
Total Price:
$6.40
Widget to isolate HDMI CEC signal. Plus tolerance/trace minimum test area.
Widget to isolate HDMI CEC signal. Plus tolerance/trace minimum test area.
SOT23-6 to SIL-6Breakout
author: arpuffer
2 layer board of 0.64 x 0.28 inches (16.4 x 7.2 mm)
Uploaded:
May 09, 2016
Shared:
May 09, 2016
Total Price:
$0.90
For a hot second I was going to use the ATtiny4/5/10 series for a project and then I realized that it uses a different programming interface–but not before I had already completed this breakout.
For a hot second I was going to use the ATtiny4/5/10 series for a project and then I realized that it uses a different programming interface–but not before I had already completed this breakout.
bridge_headphone_amp.brd
author: fatman
2 layer board of 1.30 x 1.39 inches (33.0 x 35.3 mm)
Uploaded:
May 08, 2016
Shared:
May 08, 2016
Total Price:
$9.00
Source
Power options
- Connect -9V, 0V, +9V to JP_POWER (as on pcb)
- Connect 0V, +9V to JP_POWER (as on pcb) AND populate R_OPT- and R_OPT+ with 10k 250mW resisors
Parts list
- TL084 or TL074
- …
Show full description
Source
Power options
- Connect -9V, 0V, +9V to JP_POWER (as on pcb)
- Connect 0V, +9V to JP_POWER (as on pcb) AND populate R_OPT- and R_OPT+ with 10k 250mW resisors
Parts list
- TL084 or TL074
- …
Show full description
Antimony-Adapter
author: m-Kresol
2 layer board of 0.59 x 0.41 inches (15.1 x 10.3 mm)
Uploaded:
May 08, 2016
Shared:
May 08, 2016
Total Price:
$1.20
NPN SMD->Through Hole Adapter board x4
BCE pinout for the SMD EBC for the trough-hole
NPN SMD->Through Hole Adapter board x4
BCE pinout for the SMD EBC for the trough-hole
BLF Q8 - NARSIL
author: pilotdog68
2 layer board of 1.81 x 1.81 inches (46.0 x 46.0 mm)
Uploaded:
May 08, 2016
Shared:
May 08, 2016
Total Price:
$16.40
AudioLED V1
author: bguest
2 layer board of 1.68 x 1.55 inches (42.6 x 39.4 mm)
Uploaded:
April 16, 2016
Shared:
May 07, 2016
Total Price:
$12.95
AudioLED V1: Arduino Pro-Mini (Atmega328p) With auto-biased sound (MAX9814) with Equalizer Chip (MSGEQ7)Will to drive a string of WS2801 / WS281x LEDs. Perfect for sound reactive strings of LEDs.
AudioLED V1: Arduino Pro-Mini (Atmega328p) With auto-biased sound (MAX9814) with Equalizer Chip (MSGEQ7)Will to drive a string of WS2801 / WS281x LEDs. Perfect for sound reactive strings of LEDs.
Monome Switch 1U
author: infovore
2 layer board of 2.36 x 1.03 inches (60.0 x 26.2 mm)
Uploaded:
May 06, 2016
Shared:
May 06, 2016
Total Price:
$12.15
A 1U-compatible PCB for the Monome "Switch" module. At 60mm wide, this is effectively 12HP wide; height is compatible with the Erthenvar/PulpLogic 1U format.
This has not been manufactured or tested by this creator, but as a simple re-jig of the layout, it should be correct.
A 1U-compatible PCB for the Monome "Switch" module. At 60mm wide, this is effectively 12HP wide; height is compatible with the Erthenvar/PulpLogic 1U format.
This has not been manufactured or tested by this creator, but as a simple re-jig of the layout, it should be correct.
One relay and Power Supply
author: BrK
2 layer board of 1.10 x 1.40 inches (27.9 x 35.6 mm)
Uploaded:
May 06, 2016
Shared:
May 06, 2016
Total Price:
$7.70
Power supply and one relay for my esp-07 board.
With a PNP transistor, as it was designed, this board dose not work with the ESP-07 module. The 3.3V logic is to low for the transistor to cut OFF the relay. The relay is always ON. Another revision with a NPN transitor is on the way. If you have…
Show full description
Power supply and one relay for my esp-07 board.
With a PNP transistor, as it was designed, this board dose not work with the ESP-07 module. The 3.3V logic is to low for the transistor to cut OFF the relay. The relay is always ON. Another revision with a NPN transitor is on the way. If you have…
Show full description
