Shared Projects

Shared Projects

60LED-v1.1.brd

author: mfonte1
Top
Bottom

2 layer board of 5.90 x 5.90 inches (149.9 x 149.9 mm)
Uploaded: August 26, 2016
Shared: September 26, 2016
Total Price: $174.10

Numitron Six Digit Clock

Numitron Six Digit Clock

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

ESP8266.v05gg

author: PeskyProducts
Top
Bottom

4 layer board of 0.71 x 0.61 inches (18.0 x 15.4 mm)
Uploaded: September 26, 2016
Shared: September 26, 2016
Total Price: $4.20

ESP8266 w/1 MByte SPI flash as Teensy 3.X add-on connecting Teensy Serial 2 with ESP8285 Serial for Teensy wifi connectivity and OTA flashing.

ESP8266 w/1 MByte SPI flash as Teensy 3.X add-on connecting Teensy Serial 2 with ESP8285 Serial for Teensy wifi connectivity and OTA flashing.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

OpenEtherSurge

author: mirage335
Top
Bottom

2 layer board of 1.70 x 0.73 inches (43.2 x 18.6 mm)
Uploaded: December 18, 2014
Shared: September 25, 2016
Total Price: $6.20

Open-source network Ethernet surge protector. Designed to keep both fast low-energy and slow high-energy transients from knocking equipment offline.

Open-source network Ethernet surge protector. Designed to keep both fast low-energy and slow high-energy transients from knocking equipment offline.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Splitter

author: mirage335
Top
Bottom

2 layer board of 1.06 x 2.94 inches (26.9 x 74.7 mm)
Uploaded: November 16, 2015
Shared: September 25, 2016
Total Price: $15.55

Shielded RJ45 Splitter

Shielded RJ45 Splitter

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

InterfaceBuffered.zip

author: mirage335
Top
Bottom

2 layer board of 1.40 x 1.64 inches (35.7 x 41.8 mm)
Uploaded: March 25, 2016
Shared: September 25, 2016
Total Price: $11.50

Buffered interface for LaserDriver.

Buffered interface for LaserDriver.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Laser

author: mirage335
Top
Bottom

2 layer board of 0.89 x 1.10 inches (22.5 x 27.8 mm)
Uploaded: March 25, 2016
Shared: September 25, 2016
Total Price: $4.80

Connector PCB for Laser.

Connector PCB for Laser.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

LaserDriver

author: mirage335
Top
Bottom

2 layer board of 3.20 x 1.55 inches (81.3 x 39.3 mm)
Uploaded: March 25, 2016
Shared: September 25, 2016
Total Price: $24.70

Constant current power supply module.

Constant current power supply module.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

strig%20test.brd

author: cnbirk
Top
Bottom

2 layer board of 0.75 x 0.70 inches (19.0 x 17.8 mm)
Uploaded: August 07, 2016
Shared: September 25, 2016
Total Price: $2.60

Gate to S-trig Converter

Gate to S-trig Converter

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

RC Model Light

author: RoboUlbricht
Top
Bottom

2 layer board of 0.79 x 1.43 inches (20.0 x 36.2 mm)
Uploaded: August 09, 2016
Shared: September 25, 2016
Total Price: $5.60

3 short blinks with 3x 3W LEDs.

  • Microcontroller - ATtiny85 (Arduino IDE)
  • Video of blinks.
  • Source code
  • [Schematic](http://www.arduinoslovakia.eu/blog/…

Show full description

3 short blinks with 3x 3W LEDs.

  • Microcontroller - ATtiny85 (Arduino IDE)
  • Video of blinks.
  • Source code
  • [Schematic](http://www.arduinoslovakia.eu/blog/…

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Bare ESP-12F to Breadboard

author: OK2GND
Top
Bottom

2 layer board of 1.50 x 1.10 inches (38.2 x 28.0 mm)
Uploaded: September 25, 2016
Shared: September 25, 2016
Total Price: $8.30

Bare ESP-12F to Breadboard. Not tested.

Bare ESP-12F to Breadboard. Not tested.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

E Field probe

author: jtklein
Top
Bottom

4 layer board of 2.68 x 0.32 inches (68.2 x 8.2 mm)
Uploaded: May 18, 2016
Shared: September 25, 2016
Total Price: $8.60

E field probe, usable to about 6 GHz

Probes

Coupling to probe, 1 mm above microstrip:

Measurements

https://github.com/loxodes/emc_tools

E field probe, usable to about 6 GHz

Probes

Coupling to probe, 1 mm above microstrip:

Measurements

https://github.com/loxodes/emc_tools

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

H Field probe

author: jtklein
Top
Bottom

4 layer board of 2.66 x 0.32 inches (67.7 x 8.2 mm)
Uploaded: May 18, 2016
Shared: September 25, 2016
Total Price: $8.50

h field probe, usable to about 6 GHz

Coupling to probe, 1 mm above and parallel to microstrip:

Measurements

https://github.com/loxodes/emc_tools

h field probe, usable to about 6 GHz

Coupling to probe, 1 mm above and parallel to microstrip:

Measurements

https://github.com/loxodes/emc_tools

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Oscillator2.zip - KD5VMF

author: KD5VMF
Top
Bottom

4 layer board of 1.01 x 0.68 inches (25.6 x 17.3 mm)
Uploaded: September 25, 2016
Shared: September 25, 2016
Total Price: $6.80

[email protected] - UNTESTED

[email protected] - UNTESTED

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Capmeter.brd

author: Spacedementia87
Top
Bottom

2 layer board of 1.21 x 1.48 inches (30.7 x 37.7 mm)
Uploaded: September 14, 2016
Shared: September 25, 2016
Total Price: $8.90

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Mains relay

author: Dumle29
Top
Bottom

2 layer board of 1.91 x 1.27 inches (48.5 x 32.2 mm)
Uploaded: September 18, 2016
Shared: September 25, 2016
Total Price: $12.05

A board for controlling mains with a FORM C relay. with extra mains connections

A board for controlling mains with a FORM C relay. with extra mains connections

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

USB-power-board

author: Dumle29
Top
Bottom

2 layer board of 3.08 x 0.53 inches (78.3 x 13.5 mm)
Uploaded: September 18, 2016
Shared: September 25, 2016
Total Price: $8.15

A PCB for providing 5v USB power, and for controlling power to a USB device

A PCB for providing 5v USB power, and for controlling power to a USB device

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

ATtinySays

author: Mechatron3000
Top
Bottom

2 layer board of 2.11 x 1.41 inches (53.6 x 35.8 mm)
Uploaded: September 25, 2016
Shared: September 25, 2016
Total Price: $14.85

A fun game made for ATtiny85 microcontroller.

A fun game made for ATtiny85 microcontroller.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

NESRGB JTAG Adapter - Rev B

author: Ste
Top
Bottom

2 layer board of 0.80 x 0.60 inches (20.3 x 15.3 mm)
Uploaded: September 25, 2016
Shared: September 25, 2016
Total Price: $2.40

Small adapter board to allow easier updating of NESRGB firmware.

Small adapter board to allow easier updating of NESRGB firmware.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

CommonCathode8segmentDisplaySPI_Gerber.zip

author: Fed
Top
Bottom

2 layer board of 1.06 x 2.08 inches (27.0 x 52.7 mm)
Uploaded: September 14, 2016
Shared: September 24, 2016
Total Price: $11.00

Common Cathode 8 segment Display SPI

Common Cathode 8 segment Display SPI

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

RJ45_4_port_a.brd

author: CraigMW
Top
Bottom

2 layer board of 2.97 x 1.62 inches (75.4 x 41.0 mm)
Uploaded: September 12, 2016
Shared: September 24, 2016
Total Price: $23.95

CellarWarden RJ45 4 Port Splitter board Version 1.0. Splits signal bus on 8 connector CAT5E/CAT6 cable into 4 parallel RJ45 ports. Includes two 0.1 inch headers for adding additional ports using ribbon cable or stackable headers. Parallels RJ45 ports in sets of 4 with CAT5E/CAT6 breakouts on two …

Show full description

CellarWarden RJ45 4 Port Splitter board Version 1.0. Splits signal bus on 8 connector CAT5E/CAT6 cable into 4 parallel RJ45 ports. Includes two 0.1 inch headers for adding additional ports using ribbon cable or stackable headers. Parallels RJ45 ports in sets of 4 with CAT5E/CAT6 breakouts on two …

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project
Whaleshark white
© Copyright 2025 OSH Park, LLC | Privacy