Shared Projects

Shared Projects

MINI_SAM_TQFP_1.27_SIMPLE_2016_12_12_001.brd

author: bwshockley
Top
Bottom

4 layer board of 0.96 x 1.55 inches (24.4 x 39.5 mm)
Uploaded: December 12, 2016
Shared: December 12, 2016
Total Price: $14.90

This is a LEGO minifigure sized development board using an Atmel SAMD21E M0 chip. I basically followed the recommended layout/setup from the SAMD21 spec sheets.

R3 may or may not be needed during programming.

SDA/SCL lines have 4.7k pull-up resistors

Included a 3.5mm WS2812B LED for fun…

Show full description

This is a LEGO minifigure sized development board using an Atmel SAMD21E M0 chip. I basically followed the recommended layout/setup from the SAMD21 spec sheets.

R3 may or may not be needed during programming.

SDA/SCL lines have 4.7k pull-up resistors

Included a 3.5mm WS2812B LED for fun…

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

STM32 Breadboard

author: Oliv4945
Top
Bottom

2 layer board of 1.91 x 1.00 inches (48.6 x 25.4 mm)
Uploaded: November 10, 2016
Shared: December 12, 2016
Total Price: $9.55

Breadboardable PCB for STM32 LQFP32. More info here

Breadboardable PCB for STM32 LQFP32. More info here

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Lemo BO R1.0

author: PIMAN
Top
Bottom

2 layer board of 0.51 x 0.41 inches (13.0 x 10.4 mm)
Uploaded: October 29, 2016
Shared: December 12, 2016
Total Price: $1.00

Lemo BO

Lemo BO

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

LostModelBuzzer V1.1

author: nppc
Top
Bottom

2 layer board of 0.47 x 0.47 inches (12.0 x 12.0 mm)
Uploaded: December 10, 2016
Shared: December 12, 2016
Total Price: $1.10

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

PWLF - bling your thing prototype

author: hydronics
Top
Bottom

2 layer board of 1.24 x 1.05 inches (31.4 x 26.7 mm)
Uploaded: December 12, 2016
Shared: December 12, 2016
Total Price: $6.45

Bling your thing wokrshop

Bling your thing wokrshop

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Dewtronics TB6600 Stepper Driver Board V1

author: dewhisna
Top
Bottom

2 layer board of 3.40 x 2.63 inches (86.5 x 66.8 mm)
Uploaded: December 12, 2016
Shared: December 12, 2016
Total Price: $44.70

Custom TB6600 Stepper Driver designed as a much improved drop-in replacement for the HY-DIV268N Module, allowing you to use your same heatsink and system integration with a better driver module.

Design details available at: [https://github.com/dewhisna/TB6600StepperDriver](https://github.com/d…

Show full description

Custom TB6600 Stepper Driver designed as a much improved drop-in replacement for the HY-DIV268N Module, allowing you to use your same heatsink and system integration with a better driver module.

Design details available at: [https://github.com/dewhisna/TB6600StepperDriver](https://github.com/d…

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

MySFreezer

author: emc2cube
Top
Bottom

2 layer board of 0.99 x 1.74 inches (25.1 x 44.1 mm)
Uploaded: December 12, 2016
Shared: December 12, 2016
Total Price: $8.55

MySensors sensor node aimed to monitor sensitive lab equipment, especially ultra low temperature -80°C freezers.

MySensors sensor node aimed to monitor sensitive lab equipment, especially ultra low temperature -80°C freezers.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

VL53L0X.Ladybug.v02a

author: PeskyProducts
Top
Bottom

4 layer board of 0.61 x 0.31 inches (15.4 x 7.8 mm)
Uploaded: December 12, 2016
Shared: December 12, 2016
Total Price: $1.80

VL53L0X time-of-flight ranging sensor add-on for Ladybug STM32L432 development board (www.kickstarter.com/projects/2109048010/arduino-programmable-cortex-m4f-development-boards). This time with a bit more style.

VL53L0X time-of-flight ranging sensor add-on for Ladybug STM32L432 development board (www.kickstarter.com/projects/2109048010/arduino-programmable-cortex-m4f-development-boards). This time with a bit more style.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

VL53L0X.Ladybug.v02

author: PeskyProducts
Top
Bottom

4 layer board of 0.61 x 0.31 inches (15.4 x 7.8 mm)
Uploaded: December 12, 2016
Shared: December 12, 2016
Total Price: $1.80

VL53L0X time-of-flight ranging sensor add-on for Ladybug STM32L432 development board (www.kickstarter.com/projects/2109048010/arduino-programmable-cortex-m4f-development-boards).

VL53L0X time-of-flight ranging sensor add-on for Ladybug STM32L432 development board (www.kickstarter.com/projects/2109048010/arduino-programmable-cortex-m4f-development-boards).

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

N64 CSync Restorer

author: Helder
Top
Bottom

2 layer board of 0.75 x 0.54 inches (19.0 x 13.7 mm)
Uploaded: December 11, 2016
Shared: December 11, 2016
Total Price: $2.00

Uses 0805 Resistors and Capacitor and any NPN SMD Transistor.

Uses 0805 Resistors and Capacitor and any NPN SMD Transistor.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

USB IR Toy v2

author: Mark
Top
Bottom

2 layer board of 1.57 x 1.00 inches (40.0 x 25.4 mm)
Uploaded: January 08, 2016
Shared: December 11, 2016
Total Price: $7.85

USB Infrared Toy from http://dangerousprototypes.com/

USB Infrared Toy from http://dangerousprototypes.com/

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

USB IR Toy v2

author: Mark
Top
Bottom

2 layer board of 1.57 x 1.00 inches (40.0 x 25.4 mm)
Uploaded: January 08, 2016
Shared: December 11, 2016
Total Price: $7.85

USB Infrared Toy from http://dangerousprototypes.com/

USB Infrared Toy from http://dangerousprototypes.com/

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

bela modular output

author: xnor
Top
Bottom

2 layer board of 4.41 x 1.31 inches (111.9 x 33.2 mm)
Uploaded: December 11, 2016
Shared: December 11, 2016
Total Price: $28.75

a modular level output interface for the bela beagle bone black cape

a modular level output interface for the bela beagle bone black cape

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

bela modular input

author: xnor
Top
Bottom

2 layer board of 4.51 x 1.41 inches (114.4 x 35.7 mm)
Uploaded: December 11, 2016
Shared: December 11, 2016
Total Price: $31.65

a modular level input interface for the bela beagle bone black cape

a modular level input interface for the bela beagle bone black cape

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

DRA818V/U Breakout (Rev 1)

author: sam210723
Top
Bottom

2 layer board of 1.54 x 2.25 inches (39.0 x 57.2 mm)
Uploaded: December 11, 2016
Shared: December 11, 2016
Total Price: $17.25

Breakout board for Dorji DRA818V/U with SMA connector.

Breakout board for Dorji DRA818V/U with SMA connector.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

cribbage board r0

author: BenFroelich
Top
Bottom

2 layer board of 1.76 x 10.85 inches (44.6 x 275.6 mm)
Uploaded: November 19, 2016
Shared: December 11, 2016
Total Price: $95.35

LED cribbage board - impractical, ornamental

LED cribbage board - impractical, ornamental

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

PIC ISCP 6P6C to 6 pin header (mini)

author: oPossum
Top
Bottom

2 layer board of 0.30 x 0.60 inches (7.6 x 15.3 mm)
Uploaded: December 11, 2016
Shared: December 11, 2016
Total Price: $0.90

PIC ISCP 6P6C (ICD3) to 6 pin header (PICKit) [mini]

PIC ISCP 6P6C (ICD3) to 6 pin header (PICKit) [mini]

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

PIC ISCP 6P6C to 6 pin header

author: oPossum
Top
Bottom

2 layer board of 0.85 x 0.60 inches (21.6 x 15.3 mm)
Uploaded: December 11, 2016
Shared: December 11, 2016
Total Price: $2.55

PIC ISCP 6P6C (ICD3) to 6 pin header (PICKit)

PIC ISCP 6P6C (ICD3) to 6 pin header (PICKit)

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

LadybugSPIFlashAddOn.v02

author: PeskyProducts
Top
Bottom

2 layer board of 0.61 x 0.31 inches (15.4 x 7.8 mm)
Uploaded: December 11, 2016
Shared: December 11, 2016
Total Price: $0.90

128 Mbit (16 Mbyte) SPI NOR flash memory add-on for Ladybug (STM32L432) development board. See kickstarter: https://www.kickstarter.com/projects/2109048010/arduino-programmable-cortex-m4f-development-boards

128 Mbit (16 Mbyte) SPI NOR flash memory add-on for Ladybug (STM32L432) development board. See kickstarter: https://www.kickstarter.com/projects/2109048010/arduino-programmable-cortex-m4f-development-boards

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

MouldyRF: RF Prototyping (GND-Via)

author: coflynn
Top
Bottom

2 layer board of 2.02 x 1.52 inches (51.2 x 38.5 mm)
Uploaded: December 11, 2016
Shared: December 11, 2016
Total Price: $15.25

An open-source RF prototyping board (with via on central pad). See <http://github.com/colinoflynn/mouldyrf>

An open-source RF prototyping board (with via on central pad). See <http://github.com/colinoflynn/mouldyrf>

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project
Whaleshark white
© Copyright 2025 OSH Park, LLC | Privacy