Shared Projects

Shared Projects

2 layer 4 layer 6 layer
Filter PCB layers

VFD Clock Display Board_RevB

author: jbwebst
Top
Bottom

2 layer board of 3.49 x 1.50 inches (88.6 x 38.1 mm)
Uploaded: January 29, 2018
Shared: January 29, 2018
Total Price: $26.15

PCB to hold (4) IV-6 Vacuum Florescent Displays (VFD) and their associated driver ICs (UDN2981A / MIC2981). All segments are paralleled (including the DP) for multiplexing via control of the 4 separate VFD grids. Decimal points can be multiplexed, or fixed at a single location via solder-jumper…

Show full description

PCB to hold (4) IV-6 Vacuum Florescent Displays (VFD) and their associated driver ICs (UDN2981A / MIC2981). All segments are paralleled (including the DP) for multiplexing via control of the 4 separate VFD grids. Decimal points can be multiplexed, or fixed at a single location via solder-jumper…

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

ColorspaceConverter

author: ZIF-TECH
Top
Bottom

2 layer board of 1.13 x 4.30 inches (28.6 x 109.2 mm)
Uploaded: January 27, 2018
Shared: January 28, 2018
Total Price: $24.25

RGB-YPBPR-RGB

RGB-YPBPR-RGB

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Joy2PS2 Mini v3 Arcade

author: spark2k06
Top
Bottom

2 layer board of 1.02 x 1.87 inches (25.8 x 47.4 mm)
Uploaded: January 28, 2018
Shared: January 28, 2018
Total Price: $9.45

PS/2 mapper from DB9 connector and multiple protocols, using atmega 168/328 at 8Mhz internal clock. (optional db15 extended atari tags)

https://github.com/spark2k06/zxuno/tree/master/joy2ps2/mini_v3 http://www.zxuno.com/forum/viewtopic.php?f=63&t=1964

PS/2 mapper from DB9 connector and multiple protocols, using atmega 168/328 at 8Mhz internal clock. (optional db15 extended atari tags)

https://github.com/spark2k06/zxuno/tree/master/joy2ps2/mini_v3 http://www.zxuno.com/forum/viewtopic.php?f=63&t=1964

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

RPi DS3231 RTC V1.0

author: Serge
Top
Bottom

2 layer board of 0.99 x 0.95 inches (25.2 x 24.2 mm)
Uploaded: January 05, 2018
Shared: January 28, 2018
Total Price: $4.70

Extremely accurate real-time clock module for Raspberry Pi based on Maxim DS3231 - Version 1.0 The source files and the documentation for this project is provided in the RPi DS3231 RTC GitHub Repository

Extremely accurate real-time clock module for Raspberry Pi based on Maxim DS3231 - Version 1.0 The source files and the documentation for this project is provided in the RPi DS3231 RTC GitHub Repository

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

USB Isolator-PCB

author: RadioMan
Top
Bottom

2 layer board of 3.73 x 1.07 inches (94.7 x 27.2 mm)
Uploaded: January 28, 2018
Shared: January 28, 2018
Total Price: $19.95

USB devices isolator. Prevents ground loops and provides ESD protection.

USB devices isolator. Prevents ground loops and provides ESD protection.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Li-IonSwProtect

author: ian1scott
Top
Bottom

2 layer board of 1.36 x 0.71 inches (34.5 x 18.0 mm)
Uploaded: January 28, 2018
Shared: January 28, 2018
Total Price: $4.80

Li-Ion battery undervoltage protection and soft on/off switch.

Files available on Github: https://github.com/ian1scott/Li-IonSwProtect

I usually use IRML6402 instead of a IRML5203 and a IRF7319 for the dual N and P channel mosfet. IRF7319 can be replaced by the (often) cheaper Vishay Si4562…

Show full description

Li-Ion battery undervoltage protection and soft on/off switch.

Files available on Github: https://github.com/ian1scott/Li-IonSwProtect

I usually use IRML6402 instead of a IRML5203 and a IRF7319 for the dual N and P channel mosfet. IRF7319 can be replaced by the (often) cheaper Vishay Si4562…

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

THI-002

author: BlinkenBox
Top
Bottom

2 layer board of 3.14 x 0.40 inches (79.7 x 10.2 mm)
Uploaded: January 28, 2018
Shared: January 28, 2018
Total Price: $6.25

Prototype of board to back a pair of HCMS-2915 displays.

Prototype of board to back a pair of HCMS-2915 displays.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Raspberry Pi HAT RGBW LED Controller Rev 1.0

author: lawr1000
Top
Bottom

2 layer board of 2.56 x 2.21 inches (65.1 x 56.1 mm)
Uploaded: January 26, 2018
Shared: January 27, 2018
Total Price: $28.30

Quad 550mA constant current LED driver HAT for Raspberry Pi. Designed with KiCad. Check Github for the KiCad design files and test code.

Quad 550mA constant current LED driver HAT for Raspberry Pi. Designed with KiCad. Check Github for the KiCad design files and test code.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Arduino Pro Micro break out board for 3 pin fan headers.

author: GregorS3
Top
Bottom

2 layer board of 1.36 x 1.38 inches (34.4 x 35.1 mm)
Uploaded: January 27, 2018
Shared: January 27, 2018
Total Price: $9.35

https://www.instructables.com/id/Simple-Arduino-Pro-Micro-Breakout/

A simple breakout board that can be used for prototyping.

The 3 pin PC fan style headers make it really easy to plug in analog and digital I/O quickly.

This board has breaks out A0 - A3, D4-D10, and D15. It also breaks o…

Show full description

https://www.instructables.com/id/Simple-Arduino-Pro-Micro-Breakout/

A simple breakout board that can be used for prototyping.

The 3 pin PC fan style headers make it really easy to plug in analog and digital I/O quickly.

This board has breaks out A0 - A3, D4-D10, and D15. It also breaks o…

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

PI_Pad

author: K8VFO
Top
Bottom

2 layer board of 0.73 x 0.40 inches (18.6 x 10.3 mm)
Uploaded: September 30, 2017
Shared: January 27, 2018
Total Price: $1.45

PI_Pad – simple PI topology. Keep a few handy in case you need to build an attenuator or impedance match. Board can accommodate SMA connectors and can fit inside a ½" copper pipe with drilled plumbing 'test caps' if you need shielding.

PI_Pad – simple PI topology. Keep a few handy in case you need to build an attenuator or impedance match. Board can accommodate SMA connectors and can fit inside a ½" copper pipe with drilled plumbing 'test caps' if you need shielding.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

T_Pad

author: K8VFO
Top
Bottom

2 layer board of 0.73 x 0.40 inches (18.6 x 10.3 mm)
Uploaded: September 30, 2017
Shared: January 27, 2018
Total Price: $1.45

T_Pad – simple T topology. Keep a few handy in case you need to build an attenuator or impedance match. Board can accommodate SMA connectors and can fit inside a ½" copper pipe with drilled plumbing 'test caps' if you need shielding.

T_Pad – simple T topology. Keep a few handy in case you need to build an attenuator or impedance match. Board can accommodate SMA connectors and can fit inside a ½" copper pipe with drilled plumbing 'test caps' if you need shielding.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Filter3

author: K8VFO
Top
Bottom

2 layer board of 1.28 x 0.40 inches (32.6 x 10.3 mm)
Uploaded: January 27, 2018
Shared: January 27, 2018
Total Price: $2.55

Filter3 – General purpose pattern which can accommodate various filter topologies. I keep a bunch of these around in case I want to build a filter. Board can accommodate SMA connectors and can fit inside a ½" copper pipe with drilled plumbing 'test caps' if you need shielding.

[_**More In…

Show full description

Filter3 – General purpose pattern which can accommodate various filter topologies. I keep a bunch of these around in case I want to build a filter. Board can accommodate SMA connectors and can fit inside a ½" copper pipe with drilled plumbing 'test caps' if you need shielding.

[_**More In…

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

VHF-UHF Preamp 3

author: K8VFO
Top
Bottom

2 layer board of 1.00 x 0.75 inches (25.5 x 19.2 mm)
Uploaded: January 27, 2018
Shared: January 27, 2018
Total Price: $3.75

VHF-UHF Preamp

Board can accommodate SMA connectors and can fit inside a 1" copper pipe with drilled plumbing 'test caps' if you need shielding. Contains a 78L05 regulator to power the SPF5043Z MMIC amp.

More Info

VHF-UHF Preamp

Board can accommodate SMA connectors and can fit inside a 1" copper pipe with drilled plumbing 'test caps' if you need shielding. Contains a 78L05 regulator to power the SPF5043Z MMIC amp.

More Info

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Filter2

author: K8VFO
Top
Bottom

2 layer board of 1.28 x 0.40 inches (32.6 x 10.3 mm)
Uploaded: January 27, 2018
Shared: January 27, 2018
Total Price: $2.55

Filter Pattern, includes harmonic termination. General purpose pattern which can accommodate various filter topologies. I keep a bunch of these around in case I want to build a filter. Board can accommodate SMA connectors and can fit inside a ½" copper pipe with drilled plumbing 'test caps' …

Show full description

Filter Pattern, includes harmonic termination. General purpose pattern which can accommodate various filter topologies. I keep a bunch of these around in case I want to build a filter. Board can accommodate SMA connectors and can fit inside a ½" copper pipe with drilled plumbing 'test caps' …

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Filter1

author: K8VFO
Top
Bottom

2 layer board of 1.28 x 0.40 inches (32.6 x 10.3 mm)
Uploaded: January 27, 2018
Shared: January 27, 2018
Total Price: $2.55

Filter Pattern, includes Cauer BPF option. General purpose pattern which can accommodate various filter topologies. I keep a bunch of these around in case I want to build a filter. Board can accommodate SMA connectors and can fit inside a ½" copper pipe with drilled plumbing 'test caps' if y…

Show full description

Filter Pattern, includes Cauer BPF option. General purpose pattern which can accommodate various filter topologies. I keep a bunch of these around in case I want to build a filter. Board can accommodate SMA connectors and can fit inside a ½" copper pipe with drilled plumbing 'test caps' if y…

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

TWANG Shield V1

author: Bart_Dring
Top
Bottom

2 layer board of 2.71 x 2.11 inches (68.8 x 53.5 mm)
Uploaded: January 25, 2018
Shared: January 27, 2018
Total Price: $28.50

This a an Arduino Mega Shield for the TWANG LED Game

This a an Arduino Mega Shield for the TWANG LED Game

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

motor6rtm

author: bobricius
Top
Bottom

2 layer board of 3.90 x 3.90 inches (98.9 x 99.1 mm)
Uploaded: January 26, 2018
Shared: January 26, 2018
Total Price: $75.95

8coil stepper motor

8coil stepper motor

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Tsugumi 3.01

author: Bjoern
Top
Bottom

2 layer board of 0.60 x 0.80 inches (15.3 x 20.3 mm)
Uploaded: January 26, 2018
Shared: January 26, 2018
Total Price: $2.40

PIC16F1455 USB CDC Test Board

PIC16F1455 USB CDC Test Board

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

mmdvm_hs_hat-r1.4

author: DougBirky
Top
Bottom

2 layer board of 2.57 x 1.19 inches (65.2 x 30.3 mm)
Uploaded: January 26, 2018
Shared: January 26, 2018
Total Price: $15.30

MMDVM Pi0 Hat. This is now 1.5 as per github info. https://github.com/mathisschmieder/MMDVM_HS_Hat

MMDVM Pi0 Hat. This is now 1.5 as per github info. https://github.com/mathisschmieder/MMDVM_HS_Hat

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

PWMUWB

author: lim7052
Top
Bottom

2 layer board of 1.81 x 1.57 inches (45.8 x 39.8 mm)
Uploaded: September 30, 2015
Shared: January 26, 2018
Total Price: $14.10

TJ_PWMUWB

TJ_PWMUWB

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project
Whaleshark white
© Copyright 2025 OSH Park, LLC | Privacy