Shared Projects

Shared Projects

2 layer 4 layer 6 layer
Filter PCB layers

Smoother 1.0

author: Otmar
Top
Bottom

2 layer board of 2.92 x 1.34 inches (74.0 x 34.0 mm)
Uploaded: September 16, 2018
Shared: September 16, 2018
Total Price: $19.50

Automotive Teensy 3.6 with Dual CAN and prototype options. Untested. Free for non commercial use, Contact Otmar for other rights. Schematic, BOM and KiCad 5.0 source files at: http://cafeelectric.com/sharedProjects/smootherArchivev1_0/

Automotive Teensy 3.6 with Dual CAN and prototype options. Untested. Free for non commercial use, Contact Otmar for other rights. Schematic, BOM and KiCad 5.0 source files at: http://cafeelectric.com/sharedProjects/smootherArchivev1_0/

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Gameboy Zero Tactile Pad (EXPERIMENTAL)

author: hernan43
Top
Bottom

2 layer board of 0.56 x 0.61 inches (14.2 x 15.5 mm)
Uploaded: September 15, 2018
Shared: September 15, 2018
Total Price: $1.70

This is my feeble attempt at making back button pads for a Gameboy Zero Build.

My thinking was to make something that would work for both a tactile button or a membrane style button setup.

If you are using a tactile switch/button you will need to insulate it from the pad.

Also I have no …

Show full description

This is my feeble attempt at making back button pads for a Gameboy Zero Build.

My thinking was to make something that would work for both a tactile button or a membrane style button setup.

If you are using a tactile switch/button you will need to insulate it from the pad.

Also I have no …

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

AntennaImpedance.kicad_pcb

author: wrickert
Top
Bottom

2 layer board of 3.56 x 3.79 inches (90.5 x 96.3 mm)
Uploaded: September 15, 2018
Shared: September 15, 2018
Total Price: $67.55

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

CardedgeBreakout.kicad_pcb

author: wrickert
Top
Bottom

2 layer board of 0.78 x 2.08 inches (19.9 x 52.8 mm)
Uploaded: September 15, 2018
Shared: September 15, 2018
Total Price: $8.15

SDR CardEdge Breakout PCB

SDR CardEdge Breakout PCB

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Header_Board.kicad_pcb

author: wrickert
Top
Bottom

4 layer board of 3.56 x 3.78 inches (90.3 x 96.0 mm)
Uploaded: September 15, 2018
Shared: September 15, 2018
Total Price: $134.40

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

AntennaPcb

author: wrickert
Top
Bottom

2 layer board of 3.55 x 3.55 inches (90.1 x 90.1 mm)
Uploaded: September 15, 2018
Shared: September 15, 2018
Total Price: $62.90

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

breakout.kicad_pcb

author: wrickert
Top
Bottom

2 layer board of 2.70 x 4.23 inches (68.7 x 107.4 mm)
Uploaded: September 15, 2018
Shared: September 15, 2018
Total Price: $57.10

Cysat 1 - Breakout board for the PicoZED SDR

Cysat 1 - Breakout board for the PicoZED SDR

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

4P4C RJ11 Modular Jack Breakout

author: mozzwald
Top
Bottom

2 layer board of 1.58 x 0.87 inches (40.2 x 22.2 mm)
Uploaded: September 15, 2018
Shared: September 15, 2018
Total Price: $6.85

4P4C RJ11 vertical modular jack breakout board (Molex 95003). M2.5 mounting holes spaced 30mm apart. Can be panel mounted with 12mm standoffs.

4P4C RJ11 vertical modular jack breakout board (Molex 95003). M2.5 mounting holes spaced 30mm apart. Can be panel mounted with 12mm standoffs.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

tinyboost

author: mike7b4
Top
Bottom

4 layer board of 1.61 x 0.62 inches (40.9 x 15.6 mm)
Uploaded: April 02, 2018
Shared: September 15, 2018
Total Price: $9.90

Not tested

https://gitlab.com/mike7b4/tinyboost

Not tested

https://gitlab.com/mike7b4/tinyboost

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

lipo3

author: mike7b4
Top
Bottom

2 layer board of 1.71 x 1.40 inches (43.5 x 35.5 mm)
Uploaded: July 10, 2018
Shared: September 15, 2018
Total Price: $11.90

https://gitlab.com/mike7b4/liposolarycharger

Untested.

https://gitlab.com/mike7b4/liposolarycharger

Untested.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

coolboard2

author: mike7b4
Top
Bottom

4 layer board of 2.41 x 1.28 inches (61.2 x 32.6 mm)
Uploaded: June 28, 2018
Shared: September 15, 2018
Total Price: $30.80

https://gitlab.com/mike7b4/rfcoolboard2

https://gitlab.com/mike7b4/rfcoolboard2

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

PSX to N64 Adapter

author: Helder
Top
Bottom

2 layer board of 1.60 x 1.64 inches (40.6 x 41.6 mm)
Uploaded: September 15, 2018
Shared: September 15, 2018
Total Price: $13.10

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Voltage Divider board Rev C

author: mjcarroll
Top
Bottom

2 layer board of 1.79 x 2.17 inches (45.4 x 55.0 mm)
Uploaded: September 14, 2018
Shared: September 14, 2018
Total Price: $19.30

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Serial Splitter Board Rev A

author: mjcarroll
Top
Bottom

2 layer board of 1.11 x 0.77 inches (28.2 x 19.5 mm)
Uploaded: September 14, 2018
Shared: September 14, 2018
Total Price: $4.25

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Indra Power Distribution Board

author: colin-pm
Top
Bottom

2 layer board of 3.94 x 3.94 inches (100.0 x 100.0 mm)
Uploaded: September 14, 2018
Shared: September 14, 2018
Total Price: $77.50

Second revision for Indra PDB. Board interfaces a raspberry Pi with 12v status LEDs, panel switches, 12v power input, and motorized linear ball valve.

Second revision for Indra PDB. Board interfaces a raspberry Pi with 12v status LEDs, panel switches, 12v power input, and motorized linear ball valve.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Continuity_Tester_Board2

author: Turnerk6
Top
Bottom

2 layer board of 3.20 x 2.01 inches (81.2 x 51.2 mm)
Uploaded: September 14, 2018
Shared: September 14, 2018
Total Price: $32.15

Continuity Tester - WO47 - Dr. Hang Ren

Continuity Tester - WO47 - Dr. Hang Ren

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Protection_Circuit

author: Turnerk6
Top
Bottom

2 layer board of 1.01 x 1.01 inches (25.6 x 25.6 mm)
Uploaded: September 14, 2018
Shared: September 14, 2018
Total Price: $5.05

Laser Protection Circuit - WO54 - Carlo Samson

Laser Protection Circuit - WO54 - Carlo Samson

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

IR LED Ring Light

author: marshall
Top
Bottom

2 layer board of 2.65 x 2.64 inches (67.2 x 67.1 mm)
Uploaded: May 17, 2016
Shared: September 14, 2018
Total Price: $34.90

IR LED Ring Light

IR LED Ring Light

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

prj110 vA

author: ht3
Top
Bottom

2 layer board of 0.60 x 1.39 inches (15.3 x 35.3 mm)
Uploaded: September 13, 2018
Shared: September 14, 2018
Total Price: $4.15

sWatch ESP32 - https://hackaday.io/project/161149-prj110-swatch

sWatch ESP32 - https://hackaday.io/project/161149-prj110-swatch

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

usb-mini-micro with cutout

author: awong
Top
Bottom

2 layer board of 0.45 x 0.40 inches (11.4 x 10.1 mm)
Uploaded: February 20, 2018
Shared: September 14, 2018
Total Price: $0.85

Adapts Mini USB footprint to Micro USB. For use with JST UB-MC5BR3-M404-4S-TB, mid-mount micro-usb port.

Adapts Mini USB footprint to Micro USB. For use with JST UB-MC5BR3-M404-4S-TB, mid-mount micro-usb port.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project
Whaleshark white
© Copyright 2025 OSH Park, LLC | Privacy