Shared Projects

Shared Projects

2 layer 4 layer 6 layer
Filter PCB layers

bar-top3.kicad_pcb

author: recri
Top
Bottom

2 layer board of 1.41 x 0.71 inches (35.7 x 17.9 mm)
Uploaded: June 07, 2017
Shared: October 10, 2018
Total Price: $4.95

Teensy LC touch pads top board. A board with 9 touch pads wired to connect to the touch enabled pins of a Teensy LC mounted beneath this board.

Teensy LC touch pads top board. A board with 9 touch pads wired to connect to the touch enabled pins of a Teensy LC mounted beneath this board.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

bar-bot3.kicad_pcb

author: recri
Top
Bottom

2 layer board of 1.41 x 0.71 inches (35.7 x 17.9 mm)
Uploaded: June 07, 2017
Shared: October 10, 2018
Total Price: $4.95

Teensy LC touch pads bottom board. A board with 9 touch pads wired to fit underneath a Teensy LC and connect to touch enabled pins.

Teensy LC touch pads bottom board. A board with 9 touch pads wired to fit underneath a Teensy LC and connect to touch enabled pins.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

watersensor0_1.kicad_pcb

author: diodelass
Top
Bottom

2 layer board of 1.01 x 5.51 inches (25.6 x 139.9 mm)
Uploaded: October 10, 2018
Shared: October 10, 2018
Total Price: $27.75

Soldering practice kit to tell when your plants need watering.

Soldering practice kit to tell when your plants need watering.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Reversible Beverage Antenna (Hammond 1551K)

author: AE7EU
Top
Bottom

2 layer board of 2.46 x 1.10 inches (62.4 x 28.0 mm)
Uploaded: October 09, 2018
Shared: October 10, 2018
Total Price: $13.55

A reversible beverage antenna, designed to go into a Hammond 1551K (Digikey PN HM1067-ND) enclosure. Add some stainless steel hardware (7 nuts, 3 wing nuts, 6 washers, 3x 0.5" to 0.75" 4-40 screws, 4x 0.5" 4-40 screws), use the PCB as a template to drill the 7x 0.125 holes + 1x 0.7" hole for t…

Show full description

A reversible beverage antenna, designed to go into a Hammond 1551K (Digikey PN HM1067-ND) enclosure. Add some stainless steel hardware (7 nuts, 3 wing nuts, 6 washers, 3x 0.5" to 0.75" 4-40 screws, 4x 0.5" 4-40 screws), use the PCB as a template to drill the 7x 0.125 holes + 1x 0.7" hole for t…

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

bin temp reader.brd

author: wvgca
Top
Bottom

2 layer board of 3.29 x 3.00 inches (83.5 x 76.2 mm)
Uploaded: January 20, 2017
Shared: October 10, 2018
Total Price: $49.30

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Cruise Test Head Interface

author: KevanKillion
Top
Bottom

2 layer board of 2.10 x 4.15 inches (53.4 x 105.4 mm)
Uploaded: October 09, 2018
Shared: October 09, 2018
Total Price: $43.60

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

wemos cny70freesdav1

author: totof
Top
Bottom

2 layer board of 1.01 x 0.81 inches (25.7 x 20.6 mm)
Uploaded: February 01, 2018
Shared: October 09, 2018
Total Price: $4.10

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

MOD_BB_AMP1

author: WA7MLH
Top
Bottom

2 layer board of 1.44 x 1.00 inches (36.7 x 25.5 mm)
Uploaded: October 09, 2018
Shared: October 09, 2018
Total Price: $7.20

Module: Broadband RF Feedback Amp Single Stage

Module: Broadband RF Feedback Amp Single Stage

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

ICS-41350 PDM Mic Breakout Board

author: cascade
Top
Bottom

2 layer board of 0.60 x 0.45 inches (15.3 x 11.5 mm)
Uploaded: October 08, 2018
Shared: October 08, 2018
Total Price: $1.35

Bridge select jumper S + G if using one, or bridge all for second unit to act as LEFT mic.

Digikey part No. 1428-1064-1-ND

Bridge select jumper S + G if using one, or bridge all for second unit to act as LEFT mic.

Digikey part No. 1428-1064-1-ND

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Capper Decapper HW Control Board

author: rpuccinelli
Top
Bottom

4 layer board of 3.06 x 1.68 inches (77.6 x 42.6 mm)
Uploaded: October 08, 2018
Shared: October 08, 2018
Total Price: $51.20

This control board is an interface between a Pi Zero with an analog hat and hardware used to cap and de-cap racks of tubes.

This control board is an interface between a Pi Zero with an analog hat and hardware used to cap and de-cap racks of tubes.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

BeagleWire R1

author: mwelling
Top
Bottom

4 layer board of 2.66 x 3.54 inches (67.6 x 89.9 mm)
Uploaded: March 22, 2018
Shared: October 08, 2018
Total Price: $94.10

ICE40 FPGA Cape for Beaglebone products

ICE40 FPGA Cape for Beaglebone products

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

WS Full Drop In Replacement With Switch and Bat Pads

author: ONiLX
Top
Bottom

2 layer board of 4.60 x 2.59 inches (116.8 x 65.7 mm)
Uploaded: October 08, 2018
Shared: October 08, 2018
Total Price: $59.50

THIS drop-in pad has pads for the stock battery holder and the power switch. I have not tested the power switch so you'll have to figure out what the different danglies do.

THIS drop-in pad has pads for the stock battery holder and the power switch. I have not tested the power switch so you'll have to figure out what the different danglies do.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

ROMY A3KD

author: antongale
Top
Bottom

2 layer board of 1.69 x 2.04 inches (42.8 x 51.7 mm)
Uploaded: September 23, 2018
Shared: October 07, 2018
Total Price: $17.15

Re-work of A3000 ROMY by Cosmos

Re-work of A3000 ROMY by Cosmos

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

K2500-PRAM-revA

author: dojoe
Top
Bottom

2 layer board of 4.51 x 0.73 inches (114.4 x 18.6 mm)
Uploaded: October 15, 2017
Shared: October 07, 2018
Total Price: $16.45

K2500 PRAM board revision A

K2500 PRAM board revision A

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

WS Full Drop In Replacement (Hackable)

author: ONiLX
Top
Bottom

2 layer board of 4.60 x 2.59 inches (116.8 x 65.7 mm)
Uploaded: October 07, 2018
Shared: October 07, 2018
Total Price: $59.50

What's cooler than a drop-in replacement for the WonderSwan? One that you can hack! I've added a bunch of holes to solder to and a USB breakout. If you want to cut the board up and sneak some other stuff into a WonderSwan case, go for it! I've added vias closer to the actual pads so you can cut d…

Show full description

What's cooler than a drop-in replacement for the WonderSwan? One that you can hack! I've added a bunch of holes to solder to and a USB breakout. If you want to cut the board up and sneak some other stuff into a WonderSwan case, go for it! I've added vias closer to the actual pads so you can cut d…

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Sansamp Classic v1.2

author: Invertiguy
Top
Bottom

2 layer board of 2.96 x 2.50 inches (75.3 x 63.5 mm)
Uploaded: October 07, 2018
Shared: October 07, 2018
Total Price: $37.00

Clone of the SansAmp Classic, a rather unique distortion pedal/amp simulator made popular by Kurt Cobain of Nirvana. BOM and drill template available at https://drive.google.com/open?id=1ENuTlHF5hKvoSzlCS-O3xfcV5GjjRook

Clone of the SansAmp Classic, a rather unique distortion pedal/amp simulator made popular by Kurt Cobain of Nirvana. BOM and drill template available at https://drive.google.com/open?id=1ENuTlHF5hKvoSzlCS-O3xfcV5GjjRook

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

FED3_100618

author: KravitzLab
Top
Bottom

2 layer board of 4.27 x 1.99 inches (108.4 x 50.4 mm)
Uploaded: October 06, 2018
Shared: October 06, 2018
Total Price: $42.35

PCB for FED3

PCB for FED3

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

esp01 ds18b20 relay double couche

author: Anthology
Top
Bottom

2 layer board of 2.20 x 2.49 inches (55.9 x 63.2 mm)
Uploaded: September 28, 2018
Shared: October 06, 2018
Total Price: $27.35

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Current Amp

author: NickJohnson
Top
Bottom

2 layer board of 1.81 x 3.01 inches (45.9 x 76.4 mm)
Uploaded: October 06, 2018
Shared: October 06, 2018
Total Price: $27.10

First platform for photoelectric effect lab op-amp circuit

First platform for photoelectric effect lab op-amp circuit

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Box_Mod_8

author: garthr2016
Top
Bottom

2 layer board of 0.73 x 1.92 inches (18.6 x 48.7 mm)
Uploaded: September 08, 2018
Shared: October 05, 2018
Total Price: $7.00

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project
Whaleshark white
© Copyright 2025 OSH Park, LLC | Privacy