Shared Projects

Shared Projects

GXB172 REV A

author: loneoceanslabs
Top
Bottom

4 layer board of 0.68 x 0.68 inches (17.3 x 17.3 mm)
Uploaded: February 21, 2018
Shared: September 13, 2018
Total Price: $4.60

GXB172 - 17mm Boost LED Driver - Rev A www.loneoceans.com/labs/gxb172/

GXB172 - 17mm Boost LED Driver - Rev A www.loneoceans.com/labs/gxb172/

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

MAX6954 16 Segment Display Driver

author: dan2600
Top
Bottom

2 layer board of 7.16 x 2.25 inches (181.9 x 57.2 mm)
Uploaded: March 22, 2018
Shared: September 13, 2018
Total Price: $80.55

A Board to run 8 16 Segment displays via the MAX6954 driver.

A Board to run 8 16 Segment displays via the MAX6954 driver.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

ZIP-DIP DRAM Adaptor

author: GRudolf94
Top
Bottom

2 layer board of 1.21 x 0.83 inches (30.8 x 21.1 mm)
Uploaded: September 13, 2018
Shared: September 13, 2018
Total Price: $5.00

Converts the pinout of a DIP 44256 256K*4bit DRAM into ZIP, or vice-versa

Converts the pinout of a DIP 44256 256K*4bit DRAM into ZIP, or vice-versa

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

TL Smoother

author: ctambaoan19
Top
Bottom

2 layer board of 1.49 x 1.02 inches (37.8 x 25.8 mm)
Uploaded: September 13, 2018
Shared: September 13, 2018
Total Price: $7.55

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

BGA28xx AMP board

author: xuhlia02
Top
Bottom

2 layer board of 1.00 x 1.10 inches (25.4 x 27.9 mm)
Uploaded: September 03, 2018
Shared: September 13, 2018
Total Price: $5.45

BGA28xx AMP board * IC1 - LDO (LE33/LE50) * C1 C2 C3 datasheet values * C4 C5 - 100n * C6 47uF SIZE C

BGA28xx AMP board * IC1 - LDO (LE33/LE50) * C1 C2 C3 datasheet values * C4 C5 - 100n * C6 47uF SIZE C

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Strip1_1.kicad_pcb

author: globalns
Top
Bottom

2 layer board of 1.46 x 0.36 inches (37.2 x 9.2 mm)
Uploaded: September 13, 2018
Shared: September 13, 2018
Total Price: $2.60

5050 LED Strip test board with 1.1mm pads, designed around TX1818A LEDs, compatible with WS2813

5050 LED Strip test board with 1.1mm pads, designed around TX1818A LEDs, compatible with WS2813

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

yesr_ttlboard-v2

author: srgang
Top
Bottom

2 layer board of 5.30 x 5.15 inches (134.7 x 130.9 mm)
Uploaded: September 13, 2018
Shared: September 13, 2018
Total Price: $136.65

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

yesr_dacboard-v2

author: srgang
Top
Bottom

2 layer board of 8.25 x 7.95 inches (209.6 x 202.0 mm)
Uploaded: September 12, 2018
Shared: September 12, 2018
Total Price: $328.25

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

AS7265X.v03a

author: PeskyProducts
Top
Bottom

4 layer board of 0.70 x 0.70 inches (17.8 x 17.8 mm)
Uploaded: September 12, 2018
Shared: September 12, 2018
Total Price: $4.90

Corrected silkscreen error.

Corrected silkscreen error.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

RPI_zero_hub

author: facelessloser
Top
Bottom

2 layer board of 2.57 x 1.19 inches (65.2 x 30.2 mm)
Uploaded: August 12, 2018
Shared: September 12, 2018
Total Price: $15.20

Part of my pocket pi project. Its a hand held raspberry pi terminal

Blog post - https://wp.me/pKY3w-qk Youtube - https://www.youtube.com/watch?v=DJa4tzv_eco

Part of my pocket pi project. Its a hand held raspberry pi terminal

Blog post - https://wp.me/pKY3w-qk Youtube - https://www.youtube.com/watch?v=DJa4tzv_eco

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

pocketPi

author: facelessloser
Top
Bottom

2 layer board of 2.51 x 0.71 inches (63.6 x 18.0 mm)
Uploaded: July 11, 2018
Shared: September 12, 2018
Total Price: $8.85

Part of my pocket pi project. Its a hand held raspberry pi terminal

Blog post - https://wp.me/pKY3w-qk Youtube - https://www.youtube.com/watch?v=DJa4tzv_eco

Part of my pocket pi project. Its a hand held raspberry pi terminal

Blog post - https://wp.me/pKY3w-qk Youtube - https://www.youtube.com/watch?v=DJa4tzv_eco

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

OTG_full_USB_raspberrypi

author: facelessloser
Top
Bottom

2 layer board of 1.08 x 1.19 inches (27.5 x 30.1 mm)
Uploaded: June 21, 2018
Shared: September 12, 2018
Total Price: $6.40

Basic breakout for Raspberry pi zero OTG test pad on the underside of the board

Basic breakout for Raspberry pi zero OTG test pad on the underside of the board

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

PewPew 10.2

author: deshipu
Top
Bottom

2 layer board of 2.76 x 1.27 inches (70.2 x 32.2 mm)
Uploaded: August 15, 2018
Shared: September 12, 2018
Total Price: $17.50

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

E73-2G4M04S Breakout

author: floep
Top
Bottom

2 layer board of 1.38 x 1.23 inches (35.0 x 31.1 mm)
Uploaded: September 12, 2018
Shared: September 12, 2018
Total Price: $8.40

Small breakout board with SWD headers for the EByte NRF52832 Module. All pins are accessible.

Assembled view

Small breakout board with SWD headers for the EByte NRF52832 Module. All pins are accessible.

Assembled view

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

STM32 Sensor node V5

author: floep
Top
Bottom

2 layer board of 1.40 x 0.80 inches (35.6 x 20.4 mm)
Uploaded: September 12, 2018
Shared: September 12, 2018
Total Price: $5.60

A Small STM32F103C8T6 board with all functional pins exposed. Similar to the BluePill board except:

  • no regulator. Will be powered by 2 AA batteries.
  • no USB
  • No LED
  • No BOOT0/BOOT1 jumper pins. BOOT0 can be pulled high by a button, BOOT1 is pulled low permanently but exposed by a PIN….

Show full description

A Small STM32F103C8T6 board with all functional pins exposed. Similar to the BluePill board except:

  • no regulator. Will be powered by 2 AA batteries.
  • no USB
  • No LED
  • No BOOT0/BOOT1 jumper pins. BOOT0 can be pulled high by a button, BOOT1 is pulled low permanently but exposed by a PIN….

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

BluePill_RFM69C_Shield

author: floep
Top
Bottom

2 layer board of 0.99 x 0.66 inches (25.2 x 16.7 mm)
Uploaded: June 10, 2018
Shared: September 12, 2018
Total Price: $3.25

A small RFM69C shield for easy mounting on an STM32 BluePill board.

A small RFM69C shield for easy mounting on an STM32 BluePill board.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

PC Engine/TurboDuo to HDRetrovision Adapter

author: MobiusStripTech
Top
Bottom

2 layer board of 0.75 x 0.95 inches (19.0 x 24.0 mm)
Uploaded: September 11, 2018
Shared: September 11, 2018
Total Price: $3.50

These boards allow you to convert an RGB modified TurboDuo, PC Engine Duo/R/RX, CoreGrafx, or SuperGrafx to use HDRetrovision component cables.

All it requires is a DIN8 connector and cable wired to the inputs on the board. Along with a 9pin miniDIN PCB mount connector for the output. I also h…

Show full description

These boards allow you to convert an RGB modified TurboDuo, PC Engine Duo/R/RX, CoreGrafx, or SuperGrafx to use HDRetrovision component cables.

All it requires is a DIN8 connector and cable wired to the inputs on the board. Along with a 9pin miniDIN PCB mount connector for the output. I also h…

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Neo Geo MVS MV-1Fx Dual Sound Amplifier v2.0

author: MobiusStripTech
Top
Bottom

2 layer board of 0.90 x 1.18 inches (22.8 x 29.9 mm)
Uploaded: September 11, 2018
Shared: September 11, 2018
Total Price: $5.25

2 Channel sound amplifier for the Neo Geo MVS MV-1Fx series boards. This amplifier will combine the 3 audio channels into 2 audio channels. This board is ideal for low profile installations by using only surface mount components.

Q1-Q2: 2SC1815 SOT23

C1-C6: 4.7uf 25V Tantalum Case B

C7-C…

Show full description

2 Channel sound amplifier for the Neo Geo MVS MV-1Fx series boards. This amplifier will combine the 3 audio channels into 2 audio channels. This board is ideal for low profile installations by using only surface mount components.

Q1-Q2: 2SC1815 SOT23

C1-C6: 4.7uf 25V Tantalum Case B

C7-C…

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

SMS/Genesis/MegaDrive RGB Bypass RF Kickout Edition

author: MobiusStripTech
Top
Bottom

2 layer board of 1.38 x 1.26 inches (35.0 x 32.0 mm)
Uploaded: September 11, 2018
Shared: September 11, 2018
Total Price: $8.65

This is based on the design by ArcadeTV.

This design expects you to have a properly attenuated cable.

This design can be used by either removing the RF Modulator from your SMS/MD/Genesis or by just using 3M tape and securing it elsewhere.

Resistor values for all models are on the rear si…

Show full description

This is based on the design by ArcadeTV.

This design expects you to have a properly attenuated cable.

This design can be used by either removing the RF Modulator from your SMS/MD/Genesis or by just using 3M tape and securing it elsewhere.

Resistor values for all models are on the rear si…

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

SMS/Genesis/MegaDrive RGB Bypass Tiny Edition

author: MobiusStripTech
Top
Bottom

2 layer board of 0.57 x 1.17 inches (14.4 x 29.6 mm)
Uploaded: September 11, 2018
Shared: September 11, 2018
Total Price: $3.30

This is based on the original design schematic by ArcadeTV. This design expects you to have a properly attenuated cable.

Resistor values for all models are on the rear silk screen. Vias are masked so no isolation should be required. As of right now, this board is un-tested but since it's based…

Show full description

This is based on the original design schematic by ArcadeTV. This design expects you to have a properly attenuated cable.

Resistor values for all models are on the rear silk screen. Vias are masked so no isolation should be required. As of right now, this board is un-tested but since it's based…

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project
Whaleshark white
© Copyright 2025 OSH Park, LLC | Privacy