Shared Projects by mtrudel

Shared Projects by mtrudel

Raspberry Pi Breakout pHAT

Top
Bottom

2 layer board of 2.57 x 1.19 inches (65.2 x 30.2 mm)
Uploaded: April 1st 2019
Shared: April 1st 2019
Total Price: $15.25

A simple Raspberry Pi pHAT to break out common interfaces & GPIO, with some clever allowances for both input & LED driving support on GPIO pins (see the GitHub project below for details on these allowances)

https://github.com/mtrudel/rpi-breakout

A simple Raspberry Pi pHAT to break out common interfaces & GPIO, with some clever allowances for both input & LED driving support on GPIO pins (see the GitHub project below for details on these allowances)

https://github.com/mtrudel/rpi-breakout

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

TeensyHID 2.0

Top
Bottom

2 layer board of 1.14 x 1.64 inches (28.8 x 41.6 mm)
Uploaded: January 21st 2018
Shared: January 22nd 2018
Total Price: $9.25

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Rotary Encoder Breakout

Top
Bottom

2 layer board of 0.88 x 0.69 inches (22.2 x 17.4 mm)
Uploaded: January 22nd 2018
Shared: January 22nd 2018
Total Price: $3.00

Breakout for PEC11 rotary encoders

Breakout for PEC11 rotary encoders

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

TeensyHID

Top
Bottom

2 layer board of 1.41 x 1.05 inches (35.7 x 26.7 mm)
Uploaded: December 13th 2017
Shared: December 13th 2017
Total Price: $7.35

A simple breakout for the Teensy, providing mounts for 1 or 2 Bourns PEC11 rotary encoders and 4 Digital / Analog IO via JST connectors. The IO connectors also break out two I2C connectors.

A simple breakout for the Teensy, providing mounts for 1 or 2 Bourns PEC11 rotary encoders and 4 Digital / Analog IO via JST connectors. The IO connectors also break out two I2C connectors.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

touchboard.brd

Top
Bottom

2 layer board of 4.54 x 0.60 inches (115.3 x 15.2 mm)
Uploaded: February 16th 2017
Shared: February 16th 2017
Total Price: $13.60

Simple capacitive touch board

Simple capacitive touch board

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project
Whaleshark white
© Copyright 2024 Oshpark LLC