PowerBoard For VFDHack project REV2
author: TinLethax
2 layer board of 1.65 x 0.53 inches (42.0 x 13.4 mm)
Uploaded:
May 12, 2020
Shared:
May 12, 2020
Total Price:
$4.35
The 50VDC, 5VAC and 3.3VDC on board regulator.
Rev2 update 1. Fixed some clearance, Ground almost touch other pad …..
The 50VDC, 5VAC and 3.3VDC on board regulator.
Rev2 update 1. Fixed some clearance, Ground almost touch other pad …..
level_sensor.kicad_pcb
author: dbrown2k
2 layer board of 1.15 x 1.15 inches (29.2 x 29.2 mm)
Uploaded:
April 23, 2020
Shared:
May 12, 2020
Total Price:
$6.60
See https://hackaday.io/project/171574-pc-resevoir-level-indicator
See https://hackaday.io/project/171574-pc-resevoir-level-indicator
DBD 1590A v3_2020-04-24
author: DLW
2 layer board of 1.21 x 1.50 inches (30.8 x 38.0 mm)
Uploaded:
April 25, 2020
Shared:
May 12, 2020
Total Price:
$9.05
https://drive.google.com/file/d/1mvoaDJbJYMnPfh4XS_Dpc4ziPFafqcps/view?usp=sharing
https://drive.google.com/file/d/1mvoaDJbJYMnPfh4XS_Dpc4ziPFafqcps/view?usp=sharing
Small 2ch Logic Level Converter for WS2811
author: shanebou24
2 layer board of 1.50 x 0.75 inches (38.2 x 19.1 mm)
Uploaded:
May 06, 2020
Shared:
May 12, 2020
Total Price:
$5.65
This board was built with a very small foot print while still using through-hole components. The intended use case for this board is with a raspberry pi running falcon pi player while sending pixel data via GPIO 18 and 19 to WS281X LEDs.
This board was built with a very small foot print while still using through-hole components. The intended use case for this board is with a raspberry pi running falcon pi player while sending pixel data via GPIO 18 and 19 to WS281X LEDs.
StepperServo Rev A
author: kevinaangstadt
2 layer board of 1.20 x 1.57 inches (30.6 x 39.9 mm)
Uploaded:
May 11, 2020
Shared:
May 11, 2020
Total Price:
$9.45
I2C interface controlling one stepper motor and two servos
I2C interface controlling one stepper motor and two servos
Epicurean Shoppe Guitar Speaker Cab Impedance Selector PCB Mounted Jacks V2_1
author: theepicureanshoppe
2 layer board of 2.90 x 1.50 inches (73.7 x 38.2 mm)
Uploaded:
May 11, 2020
Shared:
May 11, 2020
Total Price:
$21.80
www.zachweeks.com/pedals
See bottom of PCB for part numbers. Use the male terminal for speaker wire or just solder wire directly to the big pads behind the pins for the terminals.
For a 4x12, I recommend wiring each pair of speakers in parallel and then running the positive and negative le…
Show full description
www.zachweeks.com/pedals
See bottom of PCB for part numbers. Use the male terminal for speaker wire or just solder wire directly to the big pads behind the pins for the terminals.
For a 4x12, I recommend wiring each pair of speakers in parallel and then running the positive and negative le…
Show full description
VGA_1_1
author: Radiona.Org
2 layer board of 1.59 x 0.91 inches (40.3 x 23.1 mm)
Uploaded:
April 09, 2020
Shared:
May 10, 2020
Total Price:
$7.20
Not tested - on order!
Not tested - on order!
BTTF BADGE
author: SQFMI
2 layer board of 2.14 x 2.55 inches (54.4 x 64.6 mm)
Uploaded:
May 10, 2020
Shared:
May 10, 2020
Total Price:
$27.25
Order After Dark PCBs for best results
Details & Instructions - https://github.com/sqfmi/BTTF-BADGE
Order After Dark PCBs for best results
Details & Instructions - https://github.com/sqfmi/BTTF-BADGE
Sync Combiner v2
author: Gcharlie84
2 layer board of 1.59 x 1.30 inches (40.3 x 33.0 mm)
Uploaded:
July 10, 2018
Shared:
May 10, 2020
Total Price:
$10.30
ESP32_GRBL_SUBD.kicad_pcb
author: JochiST
2 layer board of 3.59 x 2.64 inches (91.2 x 67.2 mm)
Uploaded:
May 10, 2020
Shared:
May 10, 2020
Total Price:
$47.40
First prototype of an ESP32 GRBL to SUBD-25 adapter
see https://github.com/JochiSt/ESP32_GRBL_SUBD
First prototype of an ESP32 GRBL to SUBD-25 adapter
see https://github.com/JochiSt/ESP32_GRBL_SUBD
PCB Test Swatch
author: joem
2 layer board of 0.72 x 0.72 inches (18.2 x 18.2 mm)
Uploaded:
May 10, 2020
Shared:
May 10, 2020
Total Price:
$2.55
A small (inexpensive) 0.72 x 0.72 inches (0.52 in2) sample that shows different layers possible when making a PCB. The numbered layers are as follows:
- Silkscreen on solder mask on copper
- Solder mask on copper
- Solder mask
- Copper
- Nothing (bare PCB)
And on the back there is…
Show full description
A small (inexpensive) 0.72 x 0.72 inches (0.52 in2) sample that shows different layers possible when making a PCB. The numbered layers are as follows:
- Silkscreen on solder mask on copper
- Solder mask on copper
- Solder mask
- Copper
- Nothing (bare PCB)
And on the back there is…
Show full description
Soil_Project_Layout_Rev03
author: Vaidehi_salway
2 layer board of 7.74 x 3.58 inches (196.6 x 91.0 mm)
Uploaded:
May 09, 2020
Shared:
May 09, 2020
Total Price:
$138.60
GBA_SP_Battery_Board
author: makho
2 layer board of 0.44 x 1.25 inches (11.1 x 31.6 mm)
Uploaded:
May 09, 2020
Shared:
May 09, 2020
Total Price:
$2.70
Works well with 603048 batteries. 1.6mm will likely work better than 0.8mm (haven't tested 0.8mm) and 1.6mm works perfectly fine.
Please see my github for more info: https://github.com/makhowastaken/AGS_LIPO
Works well with 603048 batteries. 1.6mm will likely work better than 0.8mm (haven't tested 0.8mm) and 1.6mm works perfectly fine.
Please see my github for more info: https://github.com/makhowastaken/AGS_LIPO