Attiny1614_BOB.kicad_pcb
author: kevin-vermeer
2 layer board of 0.80 x 1.00 inches (20.4 x 25.4 mm)
Uploaded:
August 13, 2020
Shared:
August 13, 2020
Total Price:
$4.00
Attiny1614-SS Breakout for breadboarding/prototyping, with battery power connector.
0.8" x 1" overall size, headers at 0.7" spacing. No mounting holes included.
Optional RGB status LED and general-purpose button. (Do not populate LED, R2-R4, SW1 for Port B 0-3). Program using UPDI on PA0/~RST.
BOM:
- Microchip ATtiny [2/4/8/16]14-SS microcontroller
- ON MBR0540T1G SOD123 reverse polarity protection Schottky diode
- TI TPS70930DBVR low-leakage voltage regulator
- (2) Omron B3U-1000P-B switches, 1 reset/1 general-purpose input
- Cree RGB LED CLVBA-FKA-CAEDH8BBB7A363
- (optional) JST PH battery connector B2B-PH-K-S
- (2) 10-pin 0.1" Headers
- (2) 1206 10uF and (1) 0805 100 nF capacitors
- (1) 33k and (3) 180 ohm 0805 resistors
Attiny1614-SS Breakout for breadboarding/prototyping, with battery power connector.
0.8" x 1" overall size, headers at 0.7" spacing. No mounting holes included.
Optional RGB status LED and general-purpose button. (Do not populate LED, R2-R4, SW1 for Port B 0-3). Program using UPDI on PA0/~RST.
BOM:
- Microchip ATtiny [2/4/8/16]14-SS microcontroller
- ON MBR0540T1G SOD123 reverse polarity protection Schottky diode
- TI TPS70930DBVR low-leakage voltage regulator
- (2) Omron B3U-1000P-B switches, 1 reset/1 general-purpose input
- Cree RGB LED CLVBA-FKA-CAEDH8BBB7A363
- (optional) JST PH battery connector B2B-PH-K-S
- (2) 10-pin 0.1" Headers
- (2) 1206 10uF and (1) 0805 100 nF capacitors
- (1) 33k and (3) 180 ohm 0805 resistors
