Shared Projects

Shared Projects

SCART to CAT5/ BNC Screw down terminals + Audio L/R RCA

author: VajSkiDs-Consoles
Top
Bottom

2 layer board of 2.64 x 2.02 inches (67.1 x 51.4 mm)
Uploaded: July 30, 2020
Shared: July 30, 2020
Total Price: $26.70

just a rough as guts throw together for my own personal use. This was the cheapest route to convert a male SCART head across to BNC for PVM input. Just route an off cut/ cheap piece of cable through, solder down and add screw down BNC terminals for RGBs, shielded audio and RCA connectors or a cut…

Show full description

just a rough as guts throw together for my own personal use. This was the cheapest route to convert a male SCART head across to BNC for PVM input. Just route an off cut/ cheap piece of cable through, solder down and add screw down BNC terminals for RGBs, shielded audio and RCA connectors or a cut…

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

pq9ish-main-hw-qubik

author: pierros
Top
Bottom

4 layer board of 1.66 x 1.66 inches (42.2 x 42.2 mm)
Uploaded: July 30, 2020
Shared: July 30, 2020
Total Price: $27.50

QUBIK Pocketqube satellite main communications board. Based on PQ9ISH standard. Repository here https://gitlab.com/librespacefoundation/pq9ish/pq9ish-comms-vu-hw/

qubik tag

QUBIK Pocketqube satellite main communications board. Based on PQ9ISH standard. Repository here https://gitlab.com/librespacefoundation/pq9ish/pq9ish-comms-vu-hw/

qubik tag

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

open amiga sampler fixed

author: ABrugsch
Top
Bottom

2 layer board of 1.42 x 0.87 inches (36.1 x 22.2 mm)
Uploaded: July 30, 2020
Shared: July 30, 2020
Total Price: $6.15

[UNTESTED] Should fit inside a standard DB25 shell/housing [NO IT WON'T use This one] deets: Github project

[UNTESTED] Should fit inside a standard DB25 shell/housing [NO IT WON'T use This one] deets: Github project

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Sonic Grenade-09

author: wholder
Top
Bottom

2 layer board of 1.50 x 1.00 inches (38.1 x 25.4 mm)
Uploaded: June 06, 2017
Shared: July 29, 2020
Total Price: $7.50

For details see: https://sites.google.com/site/wayneholder/the-useless-machine-and-the-sonic-grenade

For details see: https://sites.google.com/site/wayneholder/the-useless-machine-and-the-sonic-grenade

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

SimplyRetro-Z5 Power Switch

author: Helder
Top
Bottom

2 layer board of 0.85 x 1.17 inches (21.6 x 29.6 mm)
Uploaded: July 29, 2020
Shared: July 29, 2020
Total Price: $4.95

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

msp432 long feather board

author: skerr92
Top
Bottom

4 layer board of 2.25 x 0.90 inches (57.2 x 22.9 mm)
Uploaded: July 29, 2020
Shared: July 29, 2020
Total Price: $20.30

Please visit the MSP432 feather board GitHub repo for additional resources, parts list, and other technical resources.

now with JTAG!

GitHub: https://github.com/skerr92/msp432-feather

Please visit the MSP432 feather board GitHub repo for additional resources, parts list, and other technical resources.

now with JTAG!

GitHub: https://github.com/skerr92/msp432-feather

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

BLF GT 4S Carrier - Negative

author: gchart
Top
Bottom

2 layer board of 1.71 x 1.71 inches (43.4 x 43.4 mm)
Uploaded: July 28, 2020
Shared: July 28, 2020
Total Price: $14.55

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

BLF GT 4S Carrier - Positive

author: gchart
Top
Bottom

2 layer board of 1.71 x 1.71 inches (43.4 x 43.4 mm)
Uploaded: July 28, 2020
Shared: July 28, 2020
Total Price: $14.55

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

USB-4 pin

author: hobbs1210
Top
Bottom

2 layer board of 0.87 x 0.60 inches (22.0 x 15.2 mm)
Uploaded: July 28, 2020
Shared: July 28, 2020
Total Price: $2.60

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

4PIN - connector

author: hobbs1210
Top
Bottom

2 layer board of 0.44 x 0.42 inches (11.2 x 10.7 mm)
Uploaded: July 28, 2020
Shared: July 28, 2020
Total Price: $0.90

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

PCB_USB-4PIN

author: hobbs1210
Top
Bottom

2 layer board of 0.97 x 0.48 inches (24.5 x 12.1 mm)
Uploaded: July 28, 2020
Shared: July 28, 2020
Total Price: $2.30

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

robotics board v2

author: cbarrett
Top
Bottom

2 layer board of 2.68 x 2.40 inches (68.0 x 61.0 mm)
Uploaded: April 16, 2020
Shared: July 28, 2020
Total Price: $32.15

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

MiSTer SDRAM Version 2.5 128MB

author: ONiLX
Top
Bottom

4 layer board of 0.92 x 1.97 inches (23.3 x 50.0 mm)
Uploaded: July 28, 2020
Shared: July 28, 2020
Total Price: $18.00

"sdram_xsd_2"

Directly from the MiSTer GitHub repository, I present to you the version 2.5 ram for the MiSTer.

Link to the original Gerbers below!

https://github.com/MiSTer-devel/Hardware_MiSTer/blob/master/releases/sdram_xsd_2.5.zip

© Alexey Melnikov 1999

SDRAM XS-D v2.5

"sdram_xsd_2"

Directly from the MiSTer GitHub repository, I present to you the version 2.5 ram for the MiSTer.

Link to the original Gerbers below!

https://github.com/MiSTer-devel/Hardware_MiSTer/blob/master/releases/sdram_xsd_2.5.zip

© Alexey Melnikov 1999

SDRAM XS-D v2.5

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Alt1488

author: maeslin
Top
Bottom

2 layer board of 0.70 x 1.20 inches (17.8 x 30.6 mm)
Uploaded: July 28, 2020
Shared: July 28, 2020
Total Price: $4.20

DS1488 substitute with replaceable battery. - 1x DS1485 in SOIC package - 1x 32.768kHz crystal, SMD, 6pF - 1x CR1220 battery holder (Harwin S8411-45R or equivalent)

Use regular 0.1" ‘square pin’ breakaway headers

DS1488 substitute with replaceable battery. - 1x DS1485 in SOIC package - 1x 32.768kHz crystal, SMD, 6pF - 1x CR1220 battery holder (Harwin S8411-45R or equivalent)

Use regular 0.1" ‘square pin’ breakaway headers

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

rgb_knob

author: davedarko
Top
Bottom

2 layer board of 1.20 x 1.05 inches (30.6 x 26.8 mm)
Uploaded: July 08, 2020
Shared: July 28, 2020
Total Price: $6.30

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

40pin-adapter.kicad_pcb

author: WorlickWerx
Top
Bottom

2 layer board of 0.80 x 2.00 inches (20.4 x 50.8 mm)
Uploaded: July 14, 2020
Shared: July 28, 2020
Total Price: $8.00

take 2 with low profile "stackable" connectors

take 2 with low profile "stackable" connectors

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

40pin-adapter.kicad_pcb

author: WorlickWerx
Top
Bottom

2 layer board of 0.64 x 2.03 inches (16.2 x 51.6 mm)
Uploaded: July 12, 2020
Shared: July 28, 2020
Total Price: $6.45

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

SWD Multi Adapter

author: elevendroids
Top
Bottom

2 layer board of 1.01 x 2.51 inches (25.6 x 63.6 mm)
Uploaded: July 27, 2020
Shared: July 27, 2020
Total Price: $12.60

SWD adapter board with the following connectors:

  • SWD 10-pin with 0.05" (1.27mm) pitch
  • SWD 10-pin with 0.1" (2.54mm) pitch
  • ARM/JTAG 20-pin
  • STDC14

GitHub

SWD adapter board with the following connectors:

  • SWD 10-pin with 0.05" (1.27mm) pitch
  • SWD 10-pin with 0.1" (2.54mm) pitch
  • ARM/JTAG 20-pin
  • STDC14

GitHub

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

ESP32 L-pad Tuning Stand

author: Mishka
Top
Bottom

2 layer board of 2.00 x 1.50 inches (50.9 x 38.2 mm)
Uploaded: July 27, 2020
Shared: July 27, 2020
Total Price: $15.05

The ESP32 L-pad tuning board for QFN 5x5 package. For details please see https://twitter.com/mishkathebear/status/1287179090236182537

The ESP32 L-pad tuning board for QFN 5x5 package. For details please see https://twitter.com/mishkathebear/status/1287179090236182537

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

CAMOutputs-7002601-Rev-C

author: DavidGauthier-M7
Top
Bottom

2 layer board of 2.18 x 1.70 inches (55.3 x 43.3 mm)
Uploaded: January 27, 2020
Shared: July 27, 2020
Total Price: $18.50

Inverter Driver Board Silk Screen correction

Inverter Driver Board Silk Screen correction

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project
Whaleshark white
© Copyright 2025 OSH Park, LLC | Privacy