Shared Projects

Shared Projects

Breadboard LED and Button Gadgets

author: UnderWare
Top
Bottom

2 layer board of 0.55 x 0.75 inches (14.1 x 19.2 mm)
Uploaded: July 28, 2021
Shared: August 10, 2021
Total Price: $2.05

Single-row LED and button gadgets with pins spaced far enough apart to reach either the positive or ground power rails. Solder on the parts then cut them apart (or the other way around if you prefer).

Single-row LED and button gadgets with pins spaced far enough apart to reach either the positive or ground power rails. Solder on the parts then cut them apart (or the other way around if you prefer).

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Breadboard Power LED Gadget

author: UnderWare
Top
Bottom

2 layer board of 0.55 x 0.25 inches (14.1 x 6.4 mm)
Uploaded: August 04, 2021
Shared: August 10, 2021
Total Price: $0.70

Tiny LED break-out to confirm that your breadboard power rail is energized. Solder on the parts then cut them apart (or the other way around if you prefer).

Tiny LED break-out to confirm that your breadboard power rail is energized. Solder on the parts then cut them apart (or the other way around if you prefer).

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Breakout Board_2021-08-10

author: Element18592
Top
Bottom

2 layer board of 2.07 x 1.05 inches (52.6 x 26.7 mm)
Uploaded: August 10, 2021
Shared: August 10, 2021
Total Price: $10.85

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

FreeEEG32 beta

author: NeuroIDSS
Top
Bottom

4 layer board of 2.76 x 2.76 inches (70.0 x 70.0 mm)
Uploaded: August 10, 2021
Shared: August 10, 2021
Total Price: $75.90

32 differential channels simultaneous sampling, 0.2 mcV RMS noise on shorted channels at 512 SPS, 4xAD7771BCPZ 64 kSPS, STM32H743ZIT6 MCU 1027 DMIPS, isolated USB, UART, SPI, SD-Card

https://github.com/neuroidss/FreeEEG32-beta

https://www.crowdsupply.com/neuroidss/freeeeg32

32 differential channels simultaneous sampling, 0.2 mcV RMS noise on shorted channels at 512 SPS, 4xAD7771BCPZ 64 kSPS, STM32H743ZIT6 MCU 1027 DMIPS, isolated USB, UART, SPI, SD-Card

https://github.com/neuroidss/FreeEEG32-beta

https://www.crowdsupply.com/neuroidss/freeeeg32

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

microsd_breakout_rev_a

author: dlebed
Top
Bottom

2 layer board of 1.54 x 0.83 inches (39.1 x 21.1 mm)
Uploaded: August 10, 2021
Shared: August 10, 2021
Total Price: $6.35

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Quick Shifter Sensor v2

author: guser210
Top
Bottom

2 layer board of 0.65 x 0.65 inches (16.6 x 16.6 mm)
Uploaded: July 09, 2021
Shared: August 10, 2021
Total Price: $2.10

This board is for detecting the distance from a magnetic field using a DRV5056A1EDBZRQ1 from TI.com.

This board is for detecting the distance from a magnetic field using a DRV5056A1EDBZRQ1 from TI.com.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

ADSMKV_2021-08-04

author: utahneurorobotics
Top
Bottom

2 layer board of 1.06 x 2.62 inches (27.0 x 66.6 mm)
Uploaded: August 05, 2021
Shared: August 09, 2021
Total Price: $13.90

Shield for Arduino WiFi MKR1010

Shield for Arduino WiFi MKR1010

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

super-regulatorv2+_2021-03-06

author: ConsolePrestige
Top
Bottom

2 layer board of 0.74 x 1.03 inches (18.9 x 26.1 mm)
Uploaded: March 06, 2021
Shared: August 09, 2021
Total Price: $3.80

snes sfc 5v regulator prototype v2

snes sfc 5v regulator prototype v2

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Permalink
    • Embed link
Embeddable link to order this shared Project

support_dip14_2021-04-28

author: ConsolePrestige
Top
Bottom

2 layer board of 0.86 x 0.77 inches (21.9 x 19.6 mm)
Uploaded: April 28, 2021
Shared: August 09, 2021
Total Price: $3.30

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Interlock Integration PCB

author: Turnerk6
Top
Bottom

2 layer board of 5.15 x 3.80 inches (130.8 x 96.5 mm)
Uploaded: August 09, 2021
Shared: August 09, 2021
Total Price: $97.85

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

BPD-v1.1

author: Loki27182
Top
Bottom

4 layer board of 0.99 x 2.30 inches (25.2 x 58.4 mm)
Uploaded: August 09, 2021
Shared: August 09, 2021
Total Price: $22.70

Version 1.1 of the two-sided photodiode circuit

Version 1.1 of the two-sided photodiode circuit

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

thicksty8k_v1

author: TD-Linux
Top
Bottom

2 layer board of 1.04 x 3.21 inches (26.5 x 81.5 mm)
Uploaded: September 13, 2020
Shared: August 09, 2021
Total Price: $16.75

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Touchscreen DRO v1.01a

author: DosMan
Top
Bottom

2 layer board of 2.05 x 3.86 inches (52.1 x 98.0 mm)
Uploaded: July 28, 2021
Shared: August 08, 2021
Total Price: $39.55

Digital readout for milling machine. Full documentation on GitHub at TouchscreenDigitalReadout.

Digital readout for milling machine. Full documentation on GitHub at TouchscreenDigitalReadout.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

DRO Sensor Jumper 2768 v1.0a

author: DosMan
Top
Bottom

2 layer board of 0.36 x 0.25 inches (9.2 x 6.4 mm)
Uploaded: July 28, 2021
Shared: August 08, 2021
Total Price: $0.45

Jumper for position sensors used on the Touchscreen Digital Readout project. Full documentation on GitHub at TouchscreenDigitalReadout. This is a 2-7-6-8 jumper, which refers to the pin num…

Show full description

Jumper for position sensors used on the Touchscreen Digital Readout project. Full documentation on GitHub at TouchscreenDigitalReadout. This is a 2-7-6-8 jumper, which refers to the pin num…

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

DMG Audio Board by Z Ali

author: angryboyscout
Top
Bottom

2 layer board of 0.84 x 0.53 inches (21.3 x 13.6 mm)
Uploaded: July 28, 2021
Shared: August 08, 2021
Total Price: $2.20

A DIY replacement audio board for aging retro gaming hardware. Due to the lack of availability of proprietary Nintendo components, this board was designed from the ground up in order to meet the specifications and function of the original audio board while using modern, readily available componen…

Show full description

A DIY replacement audio board for aging retro gaming hardware. Due to the lack of availability of proprietary Nintendo components, this board was designed from the ground up in order to meet the specifications and function of the original audio board while using modern, readily available componen…

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

apple-ii-rom-adapter.kicad_pcb

author: adrian.chadd
Top
Bottom

2 layer board of 2.11 x 1.78 inches (53.6 x 45.2 mm)
Uploaded: August 08, 2021
Shared: August 08, 2021
Total Price: $18.75

version two of my apple-ii drop in rom adapte.r

this one may actually work!

version two of my apple-ii drop in rom adapte.r

this one may actually work!

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

TSSOP16 to DIP16

author: serisman
Top
Bottom

2 layer board of 0.80 x 0.40 inches (20.3 x 10.2 mm)
Uploaded: August 08, 2021
Shared: August 08, 2021
Total Price: $1.60

Requires some ‘creative’ soldering for the 2 middle pins on the DIP headers. Start with a 1x8 pin header and remove the 2 middle pins. Insert 2 right angle pins and trim the legs down a bit. Solder the 6 through hole pins from the top first and then solder the right angle pins from the bottom.

Requires some ‘creative’ soldering for the 2 middle pins on the DIP headers. Start with a 1x8 pin header and remove the 2 middle pins. Insert 2 right angle pins and trim the legs down a bit. Solder the 6 through hole pins from the top first and then solder the right angle pins from the bottom.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

AES replacement button board

author: avramce
Top
Bottom

2 layer board of 4.33 x 1.19 inches (110.1 x 30.1 mm)
Uploaded: August 07, 2021
Shared: August 07, 2021
Total Price: $25.70

For use with a AES joystick to replace the OEM buttons with Hori, Sanwa or Seimitsu 24mm pushbuttons

For use with a AES joystick to replace the OEM buttons with Hori, Sanwa or Seimitsu 24mm pushbuttons

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Micro USB Adapter

author: eharvester
Top
Bottom

2 layer board of 0.45 x 1.00 inches (11.5 x 25.5 mm)
Uploaded: June 24, 2019
Shared: August 07, 2021
Total Price: $2.25

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

TPA6211 Balanced Audio Amplifier

author: eharvester
Top
Bottom

2 layer board of 1.01 x 1.21 inches (25.6 x 30.7 mm)
Uploaded: October 16, 2020
Shared: August 07, 2021
Total Price: $6.05

TPA6211 balanced audio amplifier

TPA6211 balanced audio amplifier

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project
Whaleshark white
© Copyright 2025 OSH Park, LLC | Privacy