Shared Projects

Shared Projects

Envelope2-main.kicad_pcb

author: Len
Top
Bottom

2 layer board of 1.59 x 4.27 inches (40.5 x 108.4 mm)
Uploaded: December 12, 2021
Shared: January 21, 2022
Total Price: $34.00

Eurorack dual envelope module - Main PCB rev 1.1

Note: There is an error on this PCB: U2 pin 2 should be connected to U1 pin 16, not to GND.

Design files here (with the error fixed): https://github.com/Len42/Synth/tree/main/modules/Envelope2

Eurorack dual envelope module - Main PCB rev 1.1

Note: There is an error on this PCB: U2 pin 2 should be connected to U1 pin 16, not to GND.

Design files here (with the error fixed): https://github.com/Len42/Synth/tree/main/modules/Envelope2

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Envelope2-controls.kicad_pcb

author: Len
Top
Bottom

2 layer board of 1.59 x 4.27 inches (40.5 x 108.4 mm)
Uploaded: December 12, 2021
Shared: January 21, 2022
Total Price: $34.00

Eurorack dual envelope module - Controls PCB rev 1.1

Design files here: https://github.com/Len42/Synth/tree/main/modules/Envelope2

Eurorack dual envelope module - Controls PCB rev 1.1

Design files here: https://github.com/Len42/Synth/tree/main/modules/Envelope2

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Envelope2-panel.kicad_pcb

author: Len
Top
Bottom

2 layer board of 1.59 x 5.07 inches (40.5 x 128.7 mm)
Uploaded: December 12, 2021
Shared: January 21, 2022
Total Price: $40.35

Eurorack dual envelope module - Front panel rev 1.1

Holes only. No pads, no tracks.

Design files here: https://github.com/Len42/Synth/tree/main/modules/Envelope2

Eurorack dual envelope module - Front panel rev 1.1

Holes only. No pads, no tracks.

Design files here: https://github.com/Len42/Synth/tree/main/modules/Envelope2

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

RF Cable Adapter

author: Liamcohen
Top
Bottom

2 layer board of 0.83 x 1.24 inches (21.2 x 31.5 mm)
Uploaded: January 21, 2022
Shared: January 21, 2022
Total Price: $5.15

Simple Cable adapter for cryogenic daughterboard

Simple Cable adapter for cryogenic daughterboard

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Molly the Mermaid

author: AllieCat
Top
Bottom

2 layer board of 2.40 x 3.19 inches (61.0 x 81.1 mm)
Uploaded: January 21, 2022
Shared: January 21, 2022
Total Price: $38.35

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

USON-8 Breakout

author: tagno25
Top
Bottom

2 layer board of 0.42 x 0.57 inches (10.7 x 14.5 mm)
Uploaded: December 02, 2020
Shared: January 21, 2022
Total Price: $1.20

USON-8 4x3mm or 2x3mm

USON-8 4x3mm or 2x3mm

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

TransponderV2 (Attention, read description!)

author: AndreasM
Top
Bottom

4 layer board of 0.77 x 0.78 inches (19.6 x 19.7 mm)
Uploaded: April 27, 2021
Shared: January 20, 2022
Total Price: $5.90

RC Hourglass transponder v2, Attention, the reference naming of the parts is different from the original schematics on Github. Use only the list below for reference. PCB includes prog terminal at the bottom and slightly smaller footprint. Play around with C4 for best TX performance, a value aroun…

Show full description

RC Hourglass transponder v2, Attention, the reference naming of the parts is different from the original schematics on Github. Use only the list below for reference. PCB includes prog terminal at the bottom and slightly smaller footprint. Play around with C4 for best TX performance, a value aroun…

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Permalink
    • Embed link
Embeddable link to order this shared Project

GBA Cart Extender for aPocket

author: insideGadgets
Top
Bottom

2 layer board of 2.06 x 1.25 inches (52.3 x 31.8 mm)
Uploaded: January 20, 2022
Shared: January 20, 2022
Total Price: $12.90

This should allow you to extend your GBA games to be flush with the Analogue Pocket top. Useful for games like Boktai. Untested,

Order as 0.8mm thickness.

You will also need to trim/cut a lot of the GBA reproduction cart and find a way to close the shell, a custom 3d printed shell could be …

Show full description

This should allow you to extend your GBA games to be flush with the Analogue Pocket top. Useful for games like Boktai. Untested,

Order as 0.8mm thickness.

You will also need to trim/cut a lot of the GBA reproduction cart and find a way to close the shell, a custom 3d printed shell could be …

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Permalink
    • Embed link
Embeddable link to order this shared Project

PlanarBypass.zip

author: W7PUA
Top
Bottom

2 layer board of 0.96 x 0.97 inches (24.4 x 24.7 mm)
Uploaded: November 30, 2017
Shared: January 20, 2022
Total Price: $4.65

Power line 0805 filter with douple caps

Power line 0805 filter with douple caps

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Micromotor Board

author: palmacas
Top
Bottom

2 layer board of 0.50 x 0.76 inches (12.6 x 19.2 mm)
Uploaded: May 18, 2020
Shared: January 19, 2022
Total Price: $1.85

Micromotor Board

Board to solder on micro metal gearmotors to avoid terminals damage. Includes a small ceramic capacitor and a two pin JST PH 2.0 connector.

More information available at [PCB para …

Show full description

Micromotor Board

Board to solder on micro metal gearmotors to avoid terminals damage. Includes a small ceramic capacitor and a two pin JST PH 2.0 connector.

More information available at [PCB para …

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

68K_34_pin_header_j20.kicad_pcb

author: brooknerk
Top
Bottom

2 layer board of 0.87 x 1.24 inches (22.2 x 31.4 mm)
Uploaded: November 19, 2021
Shared: January 19, 2022
Total Price: $5.40

20 pin"Y" repeater (ignore the file name)

20 pin"Y" repeater (ignore the file name)

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

68k_pin-headers.kicad_pcb

author: brooknerk
Top
Bottom

2 layer board of 0.99 x 2.73 inches (25.2 x 69.3 mm)
Uploaded: November 19, 2021
Shared: January 19, 2022
Total Price: $13.50

50 pin "Y" repeater pcb

50 pin "Y" repeater pcb

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

68K_34_pin_header_j2.kicad_pcb

author: brooknerk
Top
Bottom

2 layer board of 0.88 x 1.89 inches (22.4 x 48.0 mm)
Uploaded: November 19, 2021
Shared: January 19, 2022
Total Price: $8.30

34 pin "Y" repeater pcb

34 pin "Y" repeater pcb

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

EnvironmentSensorBreakout

author: inmysocks
Top
Bottom

2 layer board of 0.70 x 0.70 inches (17.8 x 17.8 mm)
Uploaded: January 15, 2022
Shared: January 19, 2022
Total Price: $2.40

Breakout board for the BME280 as well as a mems microphone with an amplifier and a photodiode for a light sensor.

Breakout board for the BME280 as well as a mems microphone with an amplifier and a photodiode for a light sensor.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Root Chip 1.0

author: Dereckrevel
Top
Bottom

2 layer board of 2.36 x 1.02 inches (60.0 x 26.0 mm)
Uploaded: January 18, 2022
Shared: January 18, 2022
Total Price: $12.05

DIY DEV board

DIY DEV board

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

STeMCell v0.1.0

author: megamind4089
Top
Bottom

2 layer board of 0.70 x 1.25 inches (17.8 x 31.8 mm)
Uploaded: January 17, 2022
Shared: January 17, 2022
Total Price: $4.35

https://github.com/megamind4089/STeMCell

https://github.com/megamind4089/STeMCell

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Elsewhere Controller v1

author: jbmorley
Top
Bottom

2 layer board of 1.90 x 1.10 inches (48.3 x 27.9 mm)
Uploaded: December 09, 2021
Shared: January 17, 2022
Total Price: $10.45

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

LGA1700 M4 Washer

author: Ochi
Top
Bottom

2 layer board of 0.35 x 0.35 inches (9.0 x 9.0 mm)
Uploaded: January 16, 2022
Shared: January 16, 2022
Total Price: $0.60

M4 Washer for LGA1700 mounting mod. Use 2oz 0.8mm PCB.

M4 Washer for LGA1700 mounting mod. Use 2oz 0.8mm PCB.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

W9AC D104 FET Transformer

author: W9AC
Top
Bottom

2 layer board of 1.90 x 1.33 inches (48.3 x 33.7 mm)
Uploaded: January 16, 2022
Shared: January 16, 2022
Total Price: $12.55

W9AC D104 FET Transformer

W9AC D104 FET Transformer

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

miniA501b6.kicad_pcb

author: adrian.chadd
Top
Bottom

2 layer board of 1.05 x 2.95 inches (26.7 x 74.9 mm)
Uploaded: January 16, 2022
Shared: January 16, 2022
Total Price: $15.45

Gary adapter for Amiga 500 RAM expansion projects.

This is /just/ the Gary adapter!

Gary adapter for Amiga 500 RAM expansion projects.

This is /just/ the Gary adapter!

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project
Whaleshark white
© Copyright 2025 OSH Park, LLC | Privacy