Shared Projects

Shared Projects

Morse Code Message Pendant

author: johnsondavies
Top
Bottom

2 layer board of 0.75 x 0.75 inches (19.0 x 19.0 mm)
Uploaded: January 13, 2022
Shared: February 13, 2022
Total Price: $2.80

A pendant that transmits a secret message in morse code by flashing an LED.

See <http://www.technoblogy.com/show?3TAC>.

A pendant that transmits a secret message in morse code by flashing an LED.

See <http://www.technoblogy.com/show?3TAC>.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Permalink
    • Embed link
Embeddable link to order this shared Project

DS Lite Type C by rorosaurus

author: Sneupi
Top
Bottom

2 layer board of 0.40 x 0.35 inches (10.3 x 8.9 mm)
Uploaded: February 13, 2022
Shared: February 13, 2022
Total Price: $0.70

https://github.com/rorosaurus/nds-lite-usb-c

https://github.com/rorosaurus/nds-lite-usb-c

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

UA726 replacement for Kobol Expander

author: Utilities
Top
Bottom

2 layer board of 0.70 x 0.50 inches (17.8 x 12.7 mm)
Uploaded: February 12, 2022
Shared: February 12, 2022
Total Price: $1.75

Pins 5, 6, 7 and 8 don't need to be connected.

The two pins on both LM3046 ends are for a 1k 3300ppm PTC (tempco) resistor. It replaces R90/R168 so don't keep it on the VCO board. It has been tested in LTSpice to well correct the temperature deviation with the exact circuit.

![<Schematic image>…

Show full description

Pins 5, 6, 7 and 8 don't need to be connected.

The two pins on both LM3046 ends are for a 1k 3300ppm PTC (tempco) resistor. It replaces R90/R168 so don't keep it on the VCO board. It has been tested in LTSpice to well correct the temperature deviation with the exact circuit.

![<Schematic image>…

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Permalink
    • Embed link
Embeddable link to order this shared Project

RF_Divider_Board_v0

author: Loki27182
Top
Bottom

4 layer board of 3.00 x 3.00 inches (76.2 x 76.2 mm)
Uploaded: February 12, 2022
Shared: February 12, 2022
Total Price: $90.00

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Thermometry_V2

author: bmong
Top
Bottom

2 layer board of 4.85 x 3.60 inches (123.2 x 91.4 mm)
Uploaded: February 11, 2022
Shared: February 11, 2022
Total Price: $87.30

Teensy and Max31865/MAX31856 board holder into a ModbusTPC system.

Teensy and Max31865/MAX31856 board holder into a ModbusTPC system.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Roland Alpha Juno-1 / Juno-2 Rotary Encoder Board

author: llamamusic
Top
Bottom

2 layer board of 0.74 x 0.96 inches (18.8 x 24.3 mm)
Uploaded: August 24, 2019
Shared: February 11, 2022
Total Price: $3.55

Easy fix for a failing rotary encoder. Install info at this link for the Alpha Juno-1 & Alpha Juno-2 synths. The price is for three (3) PCB's because OSHPark only sells a minimum of three per order. Ships anywhere in the USA for FREE…

Show full description

Easy fix for a failing rotary encoder. Install info at this link for the Alpha Juno-1 & Alpha Juno-2 synths. The price is for three (3) PCB's because OSHPark only sells a minimum of three per order. Ships anywhere in the USA for FREE…

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Fuzz Face PCB v19_2022-02-10

author: kylerush
Top
Bottom

2 layer board of 3.75 x 1.70 inches (95.4 x 43.3 mm)
Uploaded: February 10, 2022
Shared: February 11, 2022
Total Price: $31.95

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Walsh Strain Gauge v2

author: ews
Top
Bottom

2 layer board of 10.24 x 5.24 inches (260.2 x 133.2 mm)
Uploaded: February 11, 2022
Shared: February 11, 2022
Total Price: $268.40

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Ruthsarian Blade Controller Test Jig

author: ruthsarian
Top
Bottom

2 layer board of 1.20 x 1.85 inches (30.6 x 47.1 mm)
Uploaded: January 26, 2022
Shared: February 11, 2022
Total Price: $11.15

Test jig designed to test an assembled Ruthsarian Blade Controller. The board is designed to test the assembled board upside down with the BB image on the controller facing up, away from the test jig.

  • 3x [1.3mm diameter, 16mm lon…

Show full description

Test jig designed to test an assembled Ruthsarian Blade Controller. The board is designed to test the assembled board upside down with the BB image on the controller facing up, away from the test jig.

  • 3x [1.3mm diameter, 16mm lon…

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Ruthsarian Blade Controller - v4.1H

author: ruthsarian
Top
Bottom

2 layer board of 0.56 x 1.58 inches (14.1 x 40.1 mm)
Uploaded: January 26, 2022
Shared: February 11, 2022
Total Price: $4.35

An 1606-based replacement blade controller for a Galaxy's Edge lightsaber blade. The firmware and further documentation for this project may be found at github.com/ruthsarian/RuthsarianBladeController.

NOTE: this is version 4.1 H a…

Show full description

An 1606-based replacement blade controller for a Galaxy's Edge lightsaber blade. The firmware and further documentation for this project may be found at github.com/ruthsarian/RuthsarianBladeController.

NOTE: this is version 4.1 H a…

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

ESP32_C3Mini1.v02

author: PeskyProducts
Top
Bottom

4 layer board of 1.01 x 0.81 inches (25.6 x 20.5 mm)
Uploaded: February 11, 2022
Shared: February 11, 2022
Total Price: $8.10

Using native USB for program port.

Using native USB for program port.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Ruthsarian Blade Controller - 4.1L

author: ruthsarian
Top
Bottom

2 layer board of 0.56 x 1.58 inches (14.1 x 40.1 mm)
Uploaded: January 26, 2022
Shared: February 11, 2022
Total Price: $4.35

An 1606-based replacement blade controller for a Galaxy's Edge lightsaber blade. The firmware and further documentation for this project may be found at github.com/ruthsarian/RuthsarianBladeController.

BOM

  • C1, C7: [330uF electrolyt…

Show full description

An 1606-based replacement blade controller for a Galaxy's Edge lightsaber blade. The firmware and further documentation for this project may be found at github.com/ruthsarian/RuthsarianBladeController.

BOM

  • C1, C7: [330uF electrolyt…

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

HamCTR

author: emuman100
Top
Bottom

2 layer board of 3.80 x 2.50 inches (96.5 x 63.5 mm)
Uploaded: February 10, 2022
Shared: February 10, 2022
Total Price: $47.50

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

RS485 Expander v1.0

author: fra87
Top
Bottom

2 layer board of 0.85 x 0.75 inches (21.6 x 19.0 mm)
Uploaded: January 29, 2022
Shared: February 09, 2022
Total Price: $3.15

PIC16F1825 RS485 port expander version 1.0 - 01/2022

PIC16F1825 RS485 port expander version 1.0 - 01/2022

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

dipole_balun.kicad_pcb

author: KJ4QLP
Top
Bottom

2 layer board of 1.00 x 0.88 inches (25.4 x 22.2 mm)
Uploaded: February 09, 2022
Shared: February 09, 2022
Total Price: $4.35

Dipole Balun, V2, Rev-

Dipole Balun, V2, Rev-

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

UCLA Biomechatronics Lab - Haptic Glove PCB

author: Cole
Top
Bottom

2 layer board of 1.55 x 3.23 inches (39.4 x 81.9 mm)
Uploaded: February 09, 2022
Shared: February 09, 2022
Total Price: $25.00

A ESP32 Sparkfun Thing shield designed to drive 21 vibrotactile motors from a 3.7V LiPO battery.

A ESP32 Sparkfun Thing shield designed to drive 21 vibrotactile motors from a 3.7V LiPO battery.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

QVAR_Electrode.v02

author: PeskyProducts
Top
Bottom

2 layer board of 2.00 x 0.41 inches (50.8 x 10.3 mm)
Uploaded: February 08, 2022
Shared: February 08, 2022
Total Price: $4.05

Combo slide/touch comb design

Combo slide/touch comb design

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Psoc6DevRev1

author: CZouzias
Top
Bottom

4 layer board of 3.70 x 4.90 inches (94.0 x 124.5 mm)
Uploaded: February 07, 2022
Shared: February 08, 2022
Total Price: $181.30

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

FTC Stacklight Controller

author: maths22
Top
Bottom

2 layer board of 2.34 x 1.40 inches (59.4 x 35.6 mm)
Uploaded: February 08, 2022
Shared: February 08, 2022
Total Price: $16.35

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

OBC PCB v1

author: nmk456
Top
Bottom

4 layer board of 1.70 x 1.70 inches (43.2 x 43.2 mm)
Uploaded: February 08, 2022
Shared: February 08, 2022
Total Price: $28.80

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project
Whaleshark white
© Copyright 2025 OSH Park, LLC | Privacy