Shared Projects

Shared Projects

Headlamp driver

author: jstanley0
Top
Bottom

2 layer board of 1.38 x 0.52 inches (35.1 x 13.2 mm)
Uploaded: September 08, 2022
Shared: September 08, 2022
Total Price: $3.55

the headlamp I bought from amazon doesn't have enough brightness control and it makes me cycle through blinding and blinky modes to turn it off. This Will Not Do. here is a simple control board using ATtiny85

the headlamp I bought from amazon doesn't have enough brightness control and it makes me cycle through blinding and blinky modes to turn it off. This Will Not Do. here is a simple control board using ATtiny85

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

jst smh bat charger

author: ElectroMage
Top
Bottom

2 layer board of 0.95 x 0.64 inches (24.1 x 16.3 mm)
Uploaded: June 03, 2022
Shared: September 07, 2022
Total Price: $3.00

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

jst smh 4s pack

author: ElectroMage
Top
Bottom

2 layer board of 0.95 x 0.48 inches (24.1 x 12.1 mm)
Uploaded: June 03, 2022
Shared: September 07, 2022
Total Price: $2.25

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

connect-o-rama microfit3mm revA

author: mza
Top
Bottom

2 layer board of 0.82 x 0.33 inches (20.9 x 8.5 mm)
Uploaded: September 07, 2022
Shared: September 07, 2022
Total Price: $1.35

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

IT1335-900

author: BoringNorCalLogin
Top
Bottom

4 layer board of 5.27 x 3.02 inches (134.0 x 76.7 mm)
Uploaded: September 06, 2022
Shared: September 06, 2022
Total Price: $159.20

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

TS850-DCDC copy

author: evilxyzzy
Top
Bottom

2 layer board of 1.20 x 0.80 inches (30.5 x 20.3 mm)
Uploaded: March 25, 2014
Shared: September 06, 2022
Total Price: $4.80

TS850 DCDC Retrofit Design by OZ1BXM. Quick layout by me ( K6AET )

OZ1BXM's page this is based on https://www.oz1bxm.dk/TS850/ts850-repair.html

TS850 DCDC Retrofit Design by OZ1BXM. Quick layout by me ( K6AET )

OZ1BXM's page this is based on https://www.oz1bxm.dk/TS850/ts850-repair.html

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

vna_jig v0.2

author: kamocat
Top
Bottom

2 layer board of 1.00 x 0.50 inches (25.4 x 12.8 mm)
Uploaded: April 09, 2021
Shared: September 06, 2022
Total Price: $2.50

Test standard jig for vector network analyzer VNA nanoVNA RF filter complex impedance

Test standard jig for vector network analyzer VNA nanoVNA RF filter complex impedance

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

NRF_Mini_BreakoutV1

author: guser210
Top
Bottom

2 layer board of 0.80 x 0.70 inches (20.4 x 17.9 mm)
Uploaded: July 05, 2022
Shared: September 06, 2022
Total Price: $2.80

Generic breakout board for MINI NRF24L01+

guserNRF

Generic breakout board for MINI NRF24L01+

guserNRF

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Mini_NRF_Pico v1

author: guser210
Top
Bottom

2 layer board of 0.70 x 0.74 inches (17.9 x 18.8 mm)
Uploaded: July 13, 2022
Shared: September 06, 2022
Total Price: $2.60

Breakout board is for the Mini NRF24L01+ and matches the pico pin out.

guserNRF

Breakout board is for the Mini NRF24L01+ and matches the pico pin out.

guserNRF

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

HeavyWingV1

author: GamingNJncos
Top
Bottom

2 layer board of 2.39 x 1.16 inches (60.6 x 29.5 mm)
Uploaded: July 03, 2021
Shared: September 04, 2022
Total Price: $13.85

Initial prototype for BLE-Saturn-3D BOM: 1x Adafruit Feather Huzzah32 1x HiLetgo GY-521 Tilt Sensor (optional) 1x OLED 128X64 SSD1306 (optional)

Requires Adafruit Feather Huzzah32 which provides the lipo charging circuit and ESP32D for bluetooth functions. This is the minimum needed fo…

Show full description

Initial prototype for BLE-Saturn-3D BOM: 1x Adafruit Feather Huzzah32 1x HiLetgo GY-521 Tilt Sensor (optional) 1x OLED 128X64 SSD1306 (optional)

Requires Adafruit Feather Huzzah32 which provides the lipo charging circuit and ESP32D for bluetooth functions. This is the minimum needed fo…

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

LightWingV1.kicad_pcb

author: GamingNJncos
Top
Bottom

2 layer board of 2.24 x 1.18 inches (56.8 x 29.9 mm)
Uploaded: August 30, 2022
Shared: September 04, 2022
Total Price: $13.15

This is a new revision of the BLE-Saturn-3D that focuses on core functionality. This was optimized as the low cost option for home builders.

No bells, no whistles.
Note, this revision changed the pinout in order to get a tighter fit on installation and will require minor code changes in pino…

Show full description

This is a new revision of the BLE-Saturn-3D that focuses on core functionality. This was optimized as the low cost option for home builders.

No bells, no whistles.
Note, this revision changed the pinout in order to get a tighter fit on installation and will require minor code changes in pino…

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

CARAVEL ASIC HYPERRAM

author: embelon
Top
Bottom

4 layer board of 2.34 x 2.36 inches (59.5 x 60.0 mm)
Uploaded: September 04, 2022
Shared: September 04, 2022
Total Price: $55.30

Simple PCB for Open Source MPW-2 and MPW-3 Shuttles by efabless.com that connects Cypress S27KL0641 HyperRAM memory to CARAVEL ASIC with HyperRAM controller.

Simple PCB for Open Source MPW-2 and MPW-3 Shuttles by efabless.com that connects Cypress S27KL0641 HyperRAM memory to CARAVEL ASIC with HyperRAM controller.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

EPVTB

author: Moose409
Top
Bottom

2 layer board of 0.96 x 0.90 inches (24.4 x 22.9 mm)
Uploaded: April 22, 2018
Shared: September 03, 2022
Total Price: $4.30

Kraft inverter2

Kraft inverter2

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Stepper Motor Control PCB

author: JonathanPizzo
Top
Bottom

2 layer board of 4.90 x 2.80 inches (124.5 x 71.1 mm)
Uploaded: September 02, 2022
Shared: September 02, 2022
Total Price: $68.60

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

SSM2050 to SSM2056 adapter for Kobol Expander I (Rev2)

author: Utilities
Top
Bottom

2 layer board of 1.05 x 0.75 inches (26.7 x 19.0 mm)
Uploaded: September 02, 2022
Shared: September 02, 2022
Total Price: $3.90

Untested PCB but has the same schematic as Rev1 which tested fine.

To get the Decay Off switch working correctly with the VCA envelope, use Rev3 !

Remaining parts to modify on Delian Diver board: ![a…

Show full description

Untested PCB but has the same schematic as Rev1 which tested fine.

To get the Decay Off switch working correctly with the VCA envelope, use Rev3 !

Remaining parts to modify on Delian Diver board: ![a…

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Permalink
    • Embed link
Embeddable link to order this shared Project

u shaped board

author: seth.powers
Top
Bottom

2 layer board of 1.28 x 1.81 inches (32.4 x 46.0 mm)
Uploaded: September 02, 2022
Shared: September 02, 2022
Total Price: $11.55

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

pcb puck v2

author: seth.powers
Top
Bottom

2 layer board of 1.40 x 1.40 inches (35.6 x 35.6 mm)
Uploaded: September 02, 2022
Shared: September 02, 2022
Total Price: $9.75

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

30011-A

author: mstroven
Top
Bottom

2 layer board of 1.65 x 1.35 inches (41.9 x 34.3 mm)
Uploaded: September 01, 2022
Shared: September 01, 2022
Total Price: $11.10

Tail Light Comm. Adapter PCB

Tail Light Comm. Adapter PCB

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

L6726a-5v r1 Finale

author: justDIY
Top
Bottom

2 layer board of 3.16 x 0.75 inches (80.3 x 19.0 mm)
Uploaded: August 31, 2022
Shared: August 31, 2022
Total Price: $11.80

28v to 5v buck converter based on STM L6726a switchmode controller. Intended for use with 5s-6s LiFe chemistry battery packs.

28v to 5v buck converter based on STM L6726a switchmode controller. Intended for use with 5s-6s LiFe chemistry battery packs.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

CGB-LED-005

author: leggomyfroggo
Top
Bottom

2 layer board of 0.79 x 0.43 inches (20.0 x 11.0 mm)
Uploaded: June 18, 2022
Shared: August 31, 2022
Total Price: $1.70

Dual stage battery indicator for the Game Boy Color. Order as flex to ensure proper fit in all shells. Optional: use 4mm long section of 3mm(for aftermarket shells) or 4mm(for unmodified OEM shells) diameter fiber optic cable as light pipe.

Assemble according to BOM:

| Reference | Description |…

Show full description

Dual stage battery indicator for the Game Boy Color. Order as flex to ensure proper fit in all shells. Optional: use 4mm long section of 3mm(for aftermarket shells) or 4mm(for unmodified OEM shells) diameter fiber optic cable as light pipe.

Assemble according to BOM:

| Reference | Description |…

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Permalink
    • Embed link
Embeddable link to order this shared Project
Whaleshark white
© Copyright 2025 OSH Park, LLC | Privacy