LDGraphy laser driver
2 layer board of 1.13 x 1.28 inches (28.6 x 32.4 mm)
Uploaded:
July 23, 2023
Shared:
July 23, 2023
Total Price:
$7.15
The laser driver for the LDGraphy project. This allows to switch the laser quickly in the Megahertz range.
The laser driver for the LDGraphy project. This allows to switch the laser quickly in the Megahertz range.
Digital Spherometer
2 layer board of 1.34 x 0.49 inches (34.1 x 12.3 mm)
Uploaded:
May 11, 2019
Shared:
February 20, 2022
Total Price:
$3.25
Board for a Digital Spherometer Attiny85 reads output from a digital dial indicator, and outputs calculated sphere-radius on I²C-connected 1.3" OLED display (SH1106).
Board for a Digital Spherometer Attiny85 reads output from a digital dial indicator, and outputs calculated sphere-radius on I²C-connected 1.3" OLED display (SH1106).
Pi-Registerplex
2 layer board of 2.56 x 2.21 inches (65.1 x 56.1 mm)
Uploaded:
July 29, 2019
Shared:
July 29, 2019
Total Price:
$28.30
Board to multiplex GPIO pins. https://github.com/hzeller/pi-registerplex
Board to multiplex GPIO pins. https://github.com/hzeller/pi-registerplex
Active-RPi-3xHub75-Adapter
2 layer board of 3.27 x 1.40 inches (83.1 x 35.6 mm)
Uploaded:
July 07, 2019
Shared:
July 07, 2019
Total Price:
$22.90
Raspberry Pi RGB Matrix Adapter for the Raspberry Pi RGB Matrix project on github. This is identical to earlier versions of this same board except of a slimmer outline to provide space for the Ethernet connector on the Raspberry Pi4. This works fo…
Show full description
Raspberry Pi RGB Matrix Adapter for the Raspberry Pi RGB Matrix project on github. This is identical to earlier versions of this same board except of a slimmer outline to provide space for the Ethernet connector on the Raspberry Pi4. This works fo…
Show full description
Digital Spherometer
2 layer board of 1.34 x 0.56 inches (34.1 x 14.1 mm)
Uploaded:
April 28, 2019
Shared:
April 28, 2019
Total Price:
$3.70
Board for http://github.com/hzeller/digi-spherometer Attiny85 reads output from a digital dial indicator, and outputs calculated sphere-radius on I²C-connected 1.3" OLED display (SH1106)
Board for http://github.com/hzeller/digi-spherometer Attiny85 reads output from a digital dial indicator, and outputs calculated sphere-radius on I²C-connected 1.3" OLED display (SH1106)
