Shared Projects

Shared Projects

Pi Board LP

author: Crashfrog
Top
Bottom

2 layer board of 3.34 x 2.31 inches (84.9 x 58.6 mm)
Uploaded: January 26, 2013
Shared: February 03, 2015
Total Price: $38.50

Low-ProfileDoubleBoard

Low-ProfileDoubleBoard

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

LM2575 5v regulator v2

author: TorontoBuilder
Top
Bottom

2 layer board of 0.95 x 1.32 inches (24.0 x 33.5 mm)
Uploaded: February 03, 2015
Shared: February 03, 2015
Total Price: $6.20

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Power Playground

author: spacewrench
Top
Bottom

2 layer board of 3.48 x 2.56 inches (88.4 x 64.9 mm)
Uploaded: February 02, 2015
Shared: February 03, 2015
Total Price: $44.45

Inductors & MOSFETs & Amps, Oh My!

Inductors & MOSFETs & Amps, Oh My!

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

aPn_BUF_02

author: begemot
Top
Bottom

2 layer board of 1.20 x 0.98 inches (30.4 x 24.9 mm)
Uploaded: February 02, 2015
Shared: February 03, 2015
Total Price: $5.85

aPn_BUF_02

aPn_BUF_02

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

6509 TEST BOARD

author: randybob
Top
Bottom

2 layer board of 2.95 x 3.53 inches (74.8 x 89.7 mm)
Uploaded: February 02, 2015
Shared: February 02, 2015
Total Price: $52.00

TEST BOARD FOR DP

TEST BOARD FOR DP

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

SAM4S

author: kaktus
Top
Bottom

2 layer board of 1.75 x 2.22 inches (44.5 x 56.4 mm)
Uploaded: August 20, 2014
Shared: February 02, 2015
Total Price: $19.45

ATSAM4S DevBoard rev 2.0

ATSAM4S DevBoard rev 2.0

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Foam Cutter Circuit Board

author: TorontoBuilder
Top
Bottom

2 layer board of 2.09 x 2.40 inches (53.0 x 61.0 mm)
Uploaded: February 02, 2015
Shared: February 02, 2015
Total Price: $25.05

Circuit board for variable output foam cutter using either a "short" 24" or "long" 48" Nichrome Wire.

Uses a SPST switch and a 5K Pot to adjust the power output. The SPST switch bypasses the 5 Ohm resistance when using the longer 48" length of Nichrome wire.

When using the shorter 24" wire …

Show full description

Circuit board for variable output foam cutter using either a "short" 24" or "long" 48" Nichrome Wire.

Uses a SPST switch and a 5K Pot to adjust the power output. The SPST switch bypasses the 5 Ohm resistance when using the longer 48" length of Nichrome wire.

When using the shorter 24" wire …

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Battery Charger Logic Board

author: mwismer
Top
Bottom

2 layer board of 1.78 x 1.08 inches (45.1 x 27.3 mm)
Uploaded: February 02, 2015
Shared: February 02, 2015
Total Price: $9.50

https://upverter.com/OlinREVO/d4664ab3e95d1386/Battery-Charger—Logic-Board/

https://upverter.com/OlinREVO/d4664ab3e95d1386/Battery-Charger—Logic-Board/

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

BLE V1.0

author: jgyorffy
Top
Bottom

2 layer board of 0.95 x 0.78 inches (24.0 x 19.7 mm)
Uploaded: January 04, 2015
Shared: February 02, 2015
Total Price: $3.65

Bluetooth board for the nRF8001 chip. Small board layout. With this chip antenna, the line-of-sight range is easily over 5 meters. Easy to solder connecting wires to the pads on the side. By John Gyorffy

Bluetooth board for the nRF8001 chip. Small board layout. With this chip antenna, the line-of-sight range is easily over 5 meters. Easy to solder connecting wires to the pads on the side. By John Gyorffy

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

LM75 brd

author: ardu_pcb
Top
Bottom

2 layer board of 0.48 x 0.40 inches (12.1 x 10.2 mm)
Uploaded: December 29, 2014
Shared: February 01, 2015
Total Price: $0.95

LM75 brd

LM75 brd

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Laser Receiver

author: wkomm1
Top
Bottom

2 layer board of 1.10 x 0.91 inches (28.0 x 23.0 mm)
Uploaded: February 01, 2015
Shared: February 01, 2015
Total Price: $5.00

An op-amp powered laser receiver using a PIN photodiode with digital output.

The first op-amp stage amplifies the output of the diode and the second stage compares the amplified signal to an adjustable value, so as to get a digital output.

Designed by William Kommritz

An op-amp powered laser receiver using a PIN photodiode with digital output.

The first op-amp stage amplifies the output of the diode and the second stage compares the amplified signal to an adjustable value, so as to get a digital output.

Designed by William Kommritz

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

kisspdb v0.2

author: peabody124
Top
Bottom

2 layer board of 1.18 x 1.13 inches (30.0 x 28.6 mm)
Uploaded: October 14, 2014
Shared: February 01, 2015
Total Price: $6.60

Power distribution board for KISS ESCs I designed and used in my Seeing Spark frame. This has voltage and current monitoring built in, as well as a 5V switching BEC.

***Note: you should cut the enable pin…

Show full description

Power distribution board for KISS ESCs I designed and used in my Seeing Spark frame. This has voltage and current monitoring built in, as well as a 5V switching BEC.

***Note: you should cut the enable pin…

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Ubs2ftdi Gerber

author: wyolum
Top
Bottom

2 layer board of 1.38 x 0.79 inches (35.1 x 20.1 mm)
Uploaded: February 01, 2015
Shared: February 01, 2015
Total Price: $5.45

converter board, USB-B/Mini/Micro input to FTDI output (no data)

converter board, USB-B/Mini/Micro input to FTDI output (no data)

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Field LCD

author: HeliosV2
Top
Bottom

2 layer board of 3.15 x 1.75 inches (80.0 x 44.4 mm)
Uploaded: December 30, 2014
Shared: February 01, 2015
Total Price: $27.50

Simple debug tool for projects in the field.

Simple debug tool for projects in the field.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Reflow_Oven

author: HeliosV2
Top
Bottom

2 layer board of 1.60 x 1.49 inches (40.6 x 37.8 mm)
Uploaded: January 15, 2015
Shared: February 01, 2015
Total Price: $11.90

Dedicated control board for the converted oven

Dedicated control board for the converted oven

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Mini 7 Segment Scoreboard

author: CodeRed
Top
Bottom

2 layer board of 3.11 x 2.31 inches (79.1 x 58.8 mm)
Uploaded: February 01, 2015
Shared: February 01, 2015
Total Price: $36.00

Mini 7 Segment Scoreboard

Mini 7 Segment Scoreboard

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

ATtiny85_breakout

author: HeliosV2
Top
Bottom

2 layer board of 1.26 x 1.25 inches (31.9 x 31.8 mm)
Uploaded: January 16, 2015
Shared: February 01, 2015
Total Price: $7.85

Simple breakout for simple projects

Simple breakout for simple projects

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Differential Electroscope

author: davidk
Top
Bottom

2 layer board of 1.06 x 1.15 inches (27.0 x 29.1 mm)
Uploaded: August 25, 2014
Shared: January 31, 2015
Total Price: $6.05

The Less Copper Edition. More information here.

The Less Copper Edition. More information here.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

mC OKRT/10Potato v1

author: miskol
Top
Bottom

2 layer board of 2.16 x 3.73 inches (54.9 x 94.7 mm)
Uploaded: January 31, 2015
Shared: January 31, 2015
Total Price: $40.30

OKRT/10 board sized for 1590B

OKRT/10 board sized for 1590B

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

22mm A22-7135 (22mm 7135) v022

author: Red
Top
Bottom

2 layer board of 0.88 x 0.88 inches (22.3 x 22.3 mm)
Uploaded: January 31, 2015
Shared: January 31, 2015
Total Price: $3.80

v022: Added pulldown cap which occupies part of the same physical space as the Zener.

Forum Thread: http://budgetlightforum.com/node/31930

0805 sized resistors & caps.

Requires that the positions marked 7135-A and 7135-B have at least one 713…

Show full description

v022: Added pulldown cap which occupies part of the same physical space as the Zener.

Forum Thread: http://budgetlightforum.com/node/31930

0805 sized resistors & caps.

Requires that the positions marked 7135-A and 7135-B have at least one 713…

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project
Whaleshark white
© Copyright 2025 OSH Park, LLC | Privacy