Z splitter, reversing
author: Lordofhyphens
2 layer board of 0.79 x 1.10 inches (20.0 x 27.9 mm)
Uploaded:
July 06, 2015
Shared:
July 06, 2015
Total Price:
$4.30
Z-splitter that reverses the pinout
Z-splitter that reverses the pinout
CANmon
author: darrylring
2 layer board of 1.98 x 1.98 inches (50.2 x 50.2 mm)
Uploaded:
July 05, 2015
Shared:
July 06, 2015
Total Price:
$19.50
CAN Bus Monitor
CAN Bus Monitor
CANit
author: darrylring
2 layer board of 1.19 x 1.78 inches (30.2 x 45.2 mm)
Uploaded:
July 05, 2015
Shared:
July 06, 2015
Total Price:
$10.55
Dual CAN Transceiver
Dual CAN Transceiver
Lighting Detector
author: altera
2 layer board of 2.09 x 1.40 inches (53.1 x 35.6 mm)
Uploaded:
July 05, 2015
Shared:
July 06, 2015
Total Price:
$14.65
Lighting Detector from http://www.techlib.com/electronics/lightningnew.htm
Lighting Detector from http://www.techlib.com/electronics/lightningnew.htm
AVR-Pogo 0.5MM
author: friarbayliff
2 layer board of 0.75 x 0.50 inches (19.0 x 12.7 mm)
Uploaded:
July 05, 2015
Shared:
July 05, 2015
Total Price:
$1.85
AVR-Pogo 0.5MM Programming Adapter
AVR-Pogo 0.5MM Programming Adapter
2xHBridgeV03
author: jlewis184
2 layer board of 2.88 x 2.11 inches (73.2 x 53.6 mm)
Uploaded:
June 06, 2015
Shared:
July 04, 2015
Total Price:
$30.40
Arduino Compatible, Dual H-Bridge, with Solenoid Driver
Schematic, BOM, Gerbers available at: https://github.com/yoyoJosh/Arduino-Dual-H-Bridge
Arduino Compatible, Dual H-Bridge, with Solenoid Driver
Schematic, BOM, Gerbers available at: https://github.com/yoyoJosh/Arduino-Dual-H-Bridge
CSMB2u2
author: bloguetronica
2 layer board of 1.00 x 0.50 inches (25.4 x 12.7 mm)
Uploaded:
July 03, 2015
Shared:
July 03, 2015
Total Price:
$2.50
Capacitive coupling
Capacitive coupling
LED Driver Rev. A
author: fisher0251
2 layer board of 2.30 x 1.30 inches (58.4 x 33.0 mm)
Uploaded:
July 03, 2015
Shared:
July 03, 2015
Total Price:
$14.90
LED driver board for the MAX6971. This chip operates as a shift register, so the boards are designed to connect together in series with DOUT of the earlier board connected to DIN of the later.
The chip can be enabled with a PWM signal on ~OE to dim the LEDs. To permanently enable the chip, sol…
Show full description
LED driver board for the MAX6971. This chip operates as a shift register, so the boards are designed to connect together in series with DOUT of the earlier board connected to DIN of the later.
The chip can be enabled with a PWM signal on ~OE to dim the LEDs. To permanently enable the chip, sol…
Show full description
FigTronix - USB Charger v1
author: KD5VMF
2 layer board of 2.51 x 1.61 inches (63.6 x 40.8 mm)
Uploaded:
June 06, 2015
Shared:
July 03, 2015
Total Price:
$20.10
Precision 2.5A USB device charger
Email [email protected] with questions.
Precision 2.5A USB device charger
Email [email protected] with questions.
FigTroniX
author: KD5VMF
2 layer board of 0.96 x 2.16 inches (24.3 x 54.8 mm)
Uploaded:
January 04, 2015
Shared:
July 03, 2015
Total Price:
$10.30
SRK XHP50 driver
author: KoekieMonster
2 layer board of 1.82 x 1.82 inches (46.1 x 46.1 mm)
Uploaded:
June 09, 2015
Shared:
July 03, 2015
Total Price:
$16.45
this is a driver for the Skyray King type lights. I've used it to mod my SRK to work in 2S2P config and used 3 XHP50 LED's in there. For questions PM KoekieMonster @ budgetlightforum.com
this is a driver for the Skyray King type lights. I've used it to mod my SRK to work in 2S2P config and used 3 XHP50 LED's in there. For questions PM KoekieMonster @ budgetlightforum.com
REDisp AVRISP
author: LukeJA
2 layer board of 1.00 x 1.00 inches (25.4 x 25.4 mm)
Uploaded:
June 02, 2015
Shared:
July 03, 2015
Total Price:
$5.00
https://www.tindie.com/products/LukeJA/redisp-v1-micro-avrisp/ http://www.instructables.com/id/REDisp-V1-Micro-AVRisp/ A tiny AVRisp for AVR devices
https://www.tindie.com/products/LukeJA/redisp-v1-micro-avrisp/ http://www.instructables.com/id/REDisp-V1-Micro-AVRisp/ A tiny AVRisp for AVR devices
