Shared Projects by serisman

Shared Projects by serisman

Padauk MPT Dev Board (v2.0)

2 layer board of 1.10 x 0.61 inches (27.9 x 15.5 mm)
Uploaded: August 8th 2021
Shared: August 28th 2021
Total Price: $3.35

https://www.eevblog.com/forum/blog/eevblog-1144-padauk-programmer-reverse-engineering/msg3651085/#msg3651085

https://www.eevblog.com/forum/blog/eevblog-1144-padauk-programmer-reverse-engineering/msg3651085/#msg3651085

Embeddable link to order this shared Project

TSSOP16 to DIP16

2 layer board of 0.80 x 0.40 inches (20.3 x 10.2 mm)
Uploaded: August 8th 2021
Shared: August 8th 2021
Total Price: $1.60

Requires some ‘creative’ soldering for the 2 middle pins on the DIP headers. Start with a 1x8 pin header and remove the 2 middle pins. Insert 2 right angle pins and trim the legs down a bit. Solder the 6 through hole pins from the top first and then solder the right angle pins from the bottom.

Requires some ‘creative’ soldering for the 2 middle pins on the DIP headers. Start with a 1x8 pin header and remove the 2 middle pins. Insert 2 right angle pins and trim the legs down a bit. Solder the 6 through hole pins from the top first and then solder the right angle pins from the bottom.

Embeddable link to order this shared Project

SOP8 to DIP8

2 layer board of 0.40 x 0.40 inches (10.2 x 10.2 mm)
Uploaded: July 31st 2021
Shared: July 31st 2021
Total Price: $0.80

Requires some ‘creative’ soldering for the 2 middle pins on the DIP headers. Start with a 1x4 pin header and remove the 2 middle pins. Insert 2 right angle pins and trim the legs down a bit. Solder the 2 through hole pins from the top first and then solder the right angle pins from the bottom.

Requires some ‘creative’ soldering for the 2 middle pins on the DIP headers. Start with a 1x4 pin header and remove the 2 middle pins. Insert 2 right angle pins and trim the legs down a bit. Solder the 2 through hole pins from the top first and then solder the right angle pins from the bottom.

Embeddable link to order this shared Project

SOP16 to DIP16

2 layer board of 0.80 x 0.40 inches (20.3 x 10.2 mm)
Uploaded: July 31st 2021
Shared: July 31st 2021
Total Price: $1.60

Requires some ‘creative’ soldering for the 4 middle pins on the DIP headers. Start with a 1x8 pin header and remove the 4 middle pins. Insert 4 right angle pins and trim the legs down a bit. Solder the 4 through hole pins from the top first and then solder the right angle pins from the bottom.

Requires some ‘creative’ soldering for the 4 middle pins on the DIP headers. Start with a 1x8 pin header and remove the 4 middle pins. Insert 4 right angle pins and trim the legs down a bit. Solder the 4 through hole pins from the top first and then solder the right angle pins from the bottom.

Embeddable link to order this shared Project

TSSOP20 to DIP20

2 layer board of 1.00 x 0.40 inches (25.4 x 10.2 mm)
Uploaded: July 31st 2021
Shared: July 31st 2021
Total Price: $2.00

Requires some 'creative' soldering for the 4 middle pins on the DIP headers. Start with a 1x10 pin header and remove the 4 middle pins. Insert 4 right angle pins and trim the legs down a bit. Solder the 6 through hole pins from the top first and then solder the right angle pins from the bottom.

Requires some 'creative' soldering for the 4 middle pins on the DIP headers. Start with a 1x10 pin header and remove the 4 middle pins. Insert 4 right angle pins and trim the legs down a bit. Solder the 6 through hole pins from the top first and then solder the right angle pins from the bottom.

Embeddable link to order this shared Project