SOP16 to DIP16
author: serisman
2 layer board of 0.80 x 0.40 inches (20.3 x 10.2 mm)
Uploaded:
July 31, 2021
Shared:
July 31, 2021
Total Price:
$1.60
Requires some ‘creative’ soldering for the 4 middle pins on the DIP headers. Start with a 1x8 pin header and remove the 4 middle pins. Insert 4 right angle pins and trim the legs down a bit. Solder the 4 through hole pins from the top first and then solder the right angle pins from the bottom.
Requires some ‘creative’ soldering for the 4 middle pins on the DIP headers. Start with a 1x8 pin header and remove the 4 middle pins. Insert 4 right angle pins and trim the legs down a bit. Solder the 4 through hole pins from the top first and then solder the right angle pins from the bottom.