SOP8 to DIP8
author: serisman
2 layer board of 0.40 x 0.40 inches (10.2 x 10.2 mm)
Uploaded:
July 31, 2021
Shared:
July 31, 2021
Total Price:
$0.80
Requires some ‘creative’ soldering for the 2 middle pins on the DIP headers. Start with a 1x4 pin header and remove the 2 middle pins. Insert 2 right angle pins and trim the legs down a bit. Solder the 2 through hole pins from the top first and then solder the right angle pins from the bottom.
Requires some ‘creative’ soldering for the 2 middle pins on the DIP headers. Start with a 1x4 pin header and remove the 2 middle pins. Insert 2 right angle pins and trim the legs down a bit. Solder the 2 through hole pins from the top first and then solder the right angle pins from the bottom.
