Shared Projects by judge2005

Breadboard adapter for the Rodan CD11 nixie tube. These tubes have 1mm pins that plug in to a socket. This board is intended to use female D-SUB pins as a ‘socket’. These are often listed on eBay as ‘1mm tube socket pins’.

The board includes pads for two mini neopixels and for a current limiting resistor (or a jumper if current is limited off-board). Adding the resistor on the board allows you to easily swap different adapter boards in and out without having to worry about changing this resistor.

See my web site for a complete list of all my Nixie tube adapters.

Breadboard adapter for the NL840/NL807 nixie tube (or any nixie using the RTS14 pin out). These tubes have 1mm pins that plug in to a socket. This board is intended to use female D-SUB pins as a ‘socket’. These are often listed on eBay as ‘1mm tube socket pins’.

The board includes pads for a mini neopixel and for a current limiting resistor (or a jumper if current is limited off-board). Adding the resistor on the board allows you to easily swap different adapter boards in and out without having to worry about changing this resistor.

See my web site for a complete list of all my Nixie tube adapters.

Breadboard adapter for the B5441 nixie tube using female D-SUB pins. The B5441 has 0.6mm pins that plug in to a socket. This board is intended to use female D-SUB pins as a ‘socket’. These are often listed on eBay as ‘0.76mm tube socket pins’.

The board includes pads for a mini neopixel and for a current limiting resistor (or a jumper if current is limited off-board). Adding the resistor on the board allows you to easily swap different adapter boards in and out without having to worry about changing this resistor.

See my web site for a complete list of all my Nixie tube adapters.

Breadboard adapter for the ZM1000 nixie tube using female D-SUB pins. The ZM1000 has 0.6mm pins that plug in to a socket. This board is intended to use female D-SUB pins as a ‘socket’. These are often listed on eBay as ‘0.76mm tube socket pins’.

The board includes pads for a current limiting resistor (or a jumper if current is limited off-board). Adding the resistor on the board allows you to easily swap different adapter boards in and out without having to worry about changing this resistor.

See my web site for a complete list of all my Nixie tube adapters.

Breadboard adapter for any nixie that has flying leads instead of pins. To use it you will probably need a NOS tube, otherwise the leads will likely be too short.

The board includes pads for a current limiting resistor (or a jumper if current is limited off-board). Adding the resistor on the board allows you to easily swap different adapter boards in and out without having to worry about changing this resistor.

See my web site for a complete list of all my Nixie tube adapters.