Two-Digit Thermometer
2 layer board of 1.10 x 1.05 inches (28.0 x 26.7 mm)
Uploaded:
April 09, 2019
Shared:
April 09, 2019
Total Price:
$5.75
A two-digit LED thermometer using a DS12B20 1-Wire temperature sensor, and an ATtiny84 to drive the display and read the sensor.
See <http://www.technoblogy.com/show?2G8T>.
A two-digit LED thermometer using a DS12B20 1-Wire temperature sensor, and an ATtiny84 to drive the display and read the sensor.
See <http://www.technoblogy.com/show?2G8T>.
Tiny Function Generator
2 layer board of 1.60 x 1.25 inches (40.7 x 31.8 mm)
Uploaded:
December 23, 2018
Shared:
February 07, 2019
Total Price:
$10.00
A signal generator based on an ATtiny85 that uses Direct Digital Synthesis to generate a range of different waveforms, including sine, square, triangle, and noise.
See <http://www.technoblogy.com/show?2FCL>.
A signal generator based on an ATtiny85 that uses Direct Digital Synthesis to generate a range of different waveforms, including sine, square, triangle, and noise.
See <http://www.technoblogy.com/show?2FCL>.
ATtiny10 Thermometer
2 layer board of 0.75 x 0.75 inches (19.1 x 19.1 mm)
Uploaded:
February 02, 2019
Shared:
February 02, 2019
Total Price:
$2.80
A small battery-powered thermometer based on an ATtiny10 and a DS18B20 temperature sensor that displays the temperature as a series of red and green flashes on a bi-colour LED.
See <http://www.technoblogy.com/show?2GPX>.
A small battery-powered thermometer based on an ATtiny10 and a DS18B20 temperature sensor that displays the temperature as a series of red and green flashes on a bi-colour LED.
See <http://www.technoblogy.com/show?2GPX>.
Lisp Badge
2 layer board of 4.20 x 2.40 inches (106.7 x 61.0 mm)
Uploaded:
November 28, 2018
Shared:
January 10, 2019
Total Price:
$50.40
A handheld computer with a self-contained keyboard and display that you can program in Lisp.
See: <http://www.technoblogy.com/show?2AEE>.
A handheld computer with a self-contained keyboard and display that you can program in Lisp.
See: <http://www.technoblogy.com/show?2AEE>.
Continuity Tester
2 layer board of 1.75 x 0.40 inches (44.4 x 10.2 mm)
Uploaded:
November 13, 2017
Shared:
November 30, 2018
Total Price:
$3.50
This article describes a simple continuity tester, based on an ATtiny85 and a piezo buzzer, designed for checking circuit wiring, or tracing out the tracks on a PCB.
It has a low threshold resistance of 50Ω to avoid false positives, and passes less than 0.1mA through the circuit under test, to…
Show full description
This article describes a simple continuity tester, based on an ATtiny85 and a piezo buzzer, designed for checking circuit wiring, or tracing out the tracks on a PCB.
It has a low threshold resistance of 50Ω to avoid false positives, and passes less than 0.1mA through the circuit under test, to…
Show full description
