Shared projects

QRP MagLoop Controller

2 layer board of 3.96 x 1.82 inches (100.6 x 46.1 mm).
Shared on June 13th, 2014 16:23


QRP MagLoop Controller

2 layer board of 3.96 x 1.82 inches (100.6 x 46.1 mm).
Shared on June 13th, 2014 16:23

QRP MagLoop Controller by YO3GGX



AVR I2C LCD for RIG RX2

2 layer board of 2.83 x 2.42 inches (71.8 x 61.6 mm).
Shared on June 13th, 2014 16:22


AVR I2C LCD for RIG RX2

2 layer board of 2.83 x 2.42 inches (71.8 x 61.6 mm).
Shared on June 13th, 2014 16:22

Still working on this.

In short it takes the output from the RX2 that would normally drive the 7 segment LED channel display and converts it to LCD.

It also doubles as a signal meter too thus bringing everything together in a single display device.

It can also switch a preamp (or other device) off and on via the relay. This too is signaled on the LCD.



Mini 7 Segment Arduino Clock

By goboxgizmos

2 layer board of 1.97 x 1.57 inches (50.0 x 39.9 mm).
Shared on June 11th, 2014 22:33


Mini 7 Segment Arduino Clock

By goboxgizmos

2 layer board of 1.97 x 1.57 inches (50.0 x 39.9 mm).
Shared on June 11th, 2014 22:33



Barebones Arduino V3

2 layer board of 2.01 x 1.11 inches (51.0 x 28.1 mm).
Shared on June 11th, 2014 22:25


Barebones Arduino V3

2 layer board of 2.01 x 1.11 inches (51.0 x 28.1 mm).
Shared on June 11th, 2014 22:25



ADSB PIC Decoder by Sprut - SMD

2 layer board of 1.59 x 1.55 inches (40.3 x 39.4 mm).
Shared on June 11th, 2014 22:19


ADSB PIC Decoder by Sprut - SMD

2 layer board of 1.59 x 1.55 inches (40.3 x 39.4 mm).
Shared on June 11th, 2014 22:19