AVR I2C LCD for RIG RX2

By goboxgizmos

2 layer board of 2.83 x 2.42 inches (71.8 x 61.6 mm).
Shared on June 13th, 2014 16:22

Still working on this.

In short it takes the output from the RX2 that would normally drive the 7 segment LED channel display and converts it to LCD.

It also doubles as a signal meter too thus bringing everything together in a single display device.

It can also switch a preamp (or other device) off and on via the relay. This too is signaled on the LCD.


AVR I2C LCD for RIG RX2

By goboxgizmos

2 layer board of 2.83 x 2.42 inches (71.8 x 61.6 mm).
Shared on June 13th, 2014 16:22

Still working on this.

In short it takes the output from the RX2 that would normally drive the 7 segment LED channel display and converts it to LCD.

It also doubles as a signal meter too thus bringing everything together in a single display device.

It can also switch a preamp (or other device) off and on via the relay. This too is signaled on the LCD.