Shared Projects by SparkyBobo

DMX Demonstrator Clock Control Board (DMX-CPCB, Rev 1.3)

The clock control board is the bottom board for the clock control section of the control-pro.

The control pro is designed so that a series of components are sandwiched between 2 circuit boards. The DMX-CPCB board contains all the parts and is the bottom of the sandwich, the DMX-CPCF is the faceplate, i.e. the top of the sandwich.

For details click here

DMX Demonstrator Clock Control Faceplate (DMX-CPCF, Rev 1.3)

The clock control faceplate is the top board for the clock control section of the control-pro.

The control pro is designed so that a series of components are sandwiched between 2 circuit boards. The DMX-CPCB board contains all the parts and is the bottom of the sandwich, the DMX-CPCF is the faceplate, i.e. the top of the sandwich.

For details click here

DMX Demonstrator Dimmer Control Board (DMX-CPDB, Rev 1.3)

The dimmer control board is the bottom board for the dimmer control section of the control-pro.

The control pro is designed so that a series of components are sandwiched between 2 circuit boards. The DMX-CPDB board contains all the parts and is the bottom of the sandwich, the DMX-CPDF is the faceplate, i.e. the top of the sandwich.

For details click here

DMX Demonstrator Dimmer Control Faceplate (DMX-CPDF, Rev 1.3)

The dimmer control faceplate is the top board for the dimmer control section of the control-pro.

The control pro is designed so that a series of components are sandwiched between 2 circuit boards. The DMX-CPDB board contains all the parts and is the bottom of the sandwich, the DMX-CPDF is the faceplate, i.e. the top of the sandwich.

For details click here

DMX Demonstrator Transmitter (DMX-TX1, Rev 1.3)

The transmitter is an Arduino Shield board designed to accept the 3-wire data/clock signal from the transmitter and decode the data stream to control the brightness of 4 LEDs. It also has additional output for use with external LED drivers.

For details click here