Shared Projects by SparkyBobo

DMX Demonstrator Analog IO Core (DMX-IO2, Rev 1.3)

The Analog Core Module is an analog module which produces a voltage output from the DMX signal. This module is designed for use with the Receiver IO Module (DMX-RX2) and other DMX Demonstrator components. The Core module supplies 0 to +2.5…

DMX Demonstrator Frame Scrambler (DMX-FS1, Rev 1.0)

The Frame Scrambler is an Arduino Shield which provides connects between the transmitter and the receiver and can alter the data bit.

For details click [here](https://github.com/SparkyBobo/dmxdemonstrator/tree/…

DMX Demonstrator Receiver IO Interface (DMX-RX2, Rev 1.2)

The Receiver IO Interface is an Arduino Shield which provides 2 IO extension ports to connect to IO modules to the receiver.

For details click [here](https://github.com/SparkyBobo/dmxdemonstrator/tree/mas…

DMX Demonstrator Receiver (DMX-RX1, Rev 1.4)

The receiver is an Arduino Shield board designed to accept the 3-wire data/clock signal from the transmitter and decode the data stream to control the brightness of 4 LEDs.

For details click [here](https://github.com/S…

DMX Demonstrator Display-Pro (DMX-DCV, Rev 1.6)

The constant voltage display driver is breakout board which intercepts the 3-wire data/clock signal from the transmitter to amplify the data and clock signals and drive a larger display intended for a large audience.

Click [here](https://gith…