DMX Demonstrator DMX-512 IO Module (DMX-IO1, Rev 1.7)
2 layer board of 2.36 x 2.36 inches (60.0 x 60.0 mm)
Uploaded:
July 30, 2024
Shared:
July 30, 2024
Total Price:
$27.85
DMX Demonstrator DMX-512 IO Module (DMX-IO1, Rev 1.7)
The DMX-512 IO Module is a stand-alone module which generates or receives a DMX-512 signal, allowing the DMS Demonstrator system to communicate with DMX-512-compatible equipment.
For details click [here](https://github.com/SparkyBobo/d…
Show full description
DMX Demonstrator DMX-512 IO Module (DMX-IO1, Rev 1.7)
The DMX-512 IO Module is a stand-alone module which generates or receives a DMX-512 signal, allowing the DMS Demonstrator system to communicate with DMX-512-compatible equipment.
For details click [here](https://github.com/SparkyBobo/d…
Show full description
DMX Demonstrator Fixture Temp Sensor (DMX-FXT, Rev 1.0)
2 layer board of 0.59 x 0.28 inches (15.0 x 7.2 mm)
Uploaded:
July 06, 2024
Shared:
July 06, 2024
Total Price:
$0.80
DMX Demonstrator Fixture Temp Sensor (DMX-FXT, Rev 1.0)
The Fixture Temp Sensor is a stand-alone PCB which holds a small SMD surface temperature sensor for use with LEDs. It provides an analog voltage out proportional to the temperature.
For details click [here](https://github.com/SparkyB…
Show full description
DMX Demonstrator Fixture Temp Sensor (DMX-FXT, Rev 1.0)
The Fixture Temp Sensor is a stand-alone PCB which holds a small SMD surface temperature sensor for use with LEDs. It provides an analog voltage out proportional to the temperature.
For details click [here](https://github.com/SparkyB…
Show full description
DMX Demonstrator Control Pro Adapter (DMX-CPAD, Rev 1.3)
2 layer board of 2.70 x 2.10 inches (68.6 x 53.3 mm)
Uploaded:
May 25, 2024
Shared:
May 25, 2024
Total Price:
$28.35
DMX Demonstrator Control Pro Adapter (DMX-CPAD, Rev 1.3)
The Control-Pro Adapter is an Arduino Shield which provides the 3-wire data/clock signal to the Receiver (DMX-RX1) and encoded the data stream to control the brightness of 4 LEDs using the Control Pro (DMX-…
Show full description
DMX Demonstrator Control Pro Adapter (DMX-CPAD, Rev 1.3)
The Control-Pro Adapter is an Arduino Shield which provides the 3-wire data/clock signal to the Receiver (DMX-RX1) and encoded the data stream to control the brightness of 4 LEDs using the Control Pro (DMX-…
Show full description
DMX Demonstrator Transmitter IO Interface (DMX-TX2, Rev 1.4)
2 layer board of 2.70 x 2.10 inches (68.6 x 53.3 mm)
Uploaded:
May 25, 2024
Shared:
May 25, 2024
Total Price:
$28.35
DMX Demonstrator Transmitter IO Interface (DMX-TX2, Rev 1.4)
The Transmitter IO Interface is an Arduino Shield which provides an IO extension port to connect to IO modules to the transmitter.
For details click [here](https://github.com/SparkyBobo/dmxdemonstrator/tree/master/hardware/trans…
Show full description
DMX Demonstrator Transmitter IO Interface (DMX-TX2, Rev 1.4)
The Transmitter IO Interface is an Arduino Shield which provides an IO extension port to connect to IO modules to the transmitter.
For details click [here](https://github.com/SparkyBobo/dmxdemonstrator/tree/master/hardware/trans…
Show full description
DMX Demonstrator Constant Current LED Driver (DMX-DCC, Rev 1.1)
2 layer board of 2.36 x 2.36 inches (60.0 x 60.0 mm)
Uploaded:
April 25, 2024
Shared:
April 25, 2024
Total Price:
$27.85
DMX Demonstrator Constant Current LED Driver (DMX-DCC, Rev 1.1)
The Constant Current LED Driver is stand-along module which takes 2 logic signals and amplifies the output for a larger current load such as an led chip.
For details click [here](https://github.com/SparkyBobo/dmxdemonstrator/…
Show full description
DMX Demonstrator Constant Current LED Driver (DMX-DCC, Rev 1.1)
The Constant Current LED Driver is stand-along module which takes 2 logic signals and amplifies the output for a larger current load such as an led chip.
For details click [here](https://github.com/SparkyBobo/dmxdemonstrator/…
Show full description
