Shared Projects by SparkyBobo

DMX Demonstrator Transmitter IO Interface (DMX-TX2, Rev 1.3)

The Transmitter IO Interface is an Arduino Shield which provides the 3-wire data/clock signal to the Receiver (DMX-RX1) and encode the data stream to control the brightness of 4 LEDs using the Control Pro (DMX-CP*).

For details click here

DMX Demonstrator Clock Control Board (DMX-CPCB, Rev 1.3)

The clock control board is the bottom board for the clock control section of the control-pro.

The control pro is designed so that a series of components are sandwiched between 2 circuit boards. The DMX-CPCB board contains all the parts and is the bottom of the sandwich, the DMX-CPCF is the faceplate, i.e. the top of the sandwich.

For details click here

DMX Demonstrator Clock Control Faceplate (DMX-CPCF, Rev 1.3)

The clock control faceplate is the top board for the clock control section of the control-pro.

The control pro is designed so that a series of components are sandwiched between 2 circuit boards. The DMX-CPCB board contains all the parts and is the bottom of the sandwich, the DMX-CPCF is the faceplate, i.e. the top of the sandwich.

For details click here

DMX Demonstrator Dimmer Control Board (DMX-CPDB, Rev 1.3)

The dimmer control board is the bottom board for the dimmer control section of the control-pro.

The control pro is designed so that a series of components are sandwiched between 2 circuit boards. The DMX-CPDB board contains all the parts and is the bottom of the sandwich, the DMX-CPDF is the faceplate, i.e. the top of the sandwich.

For details click here

DMX Demonstrator Dimmer Control Faceplate (DMX-CPDF, Rev 1.3)

The dimmer control faceplate is the top board for the dimmer control section of the control-pro.

The control pro is designed so that a series of components are sandwiched between 2 circuit boards. The DMX-CPDB board contains all the parts and is the bottom of the sandwich, the DMX-CPDF is the faceplate, i.e. the top of the sandwich.

For details click here