iliPlate.brd
author: petay
2 layer board of 0.46 x 0.89 inches (11.6 x 22.7 mm)
Uploaded:
September 13, 2017
Shared:
September 13, 2017
Total Price:
$2.00
minimal interface board for ili9341 screens. R1 is a 10ohm resistor (0805 size) , but can be replaced with other values to adjust backlight brightness. The less commonly used touch interface pins are broke out to pads on the back. can be used for 2.2" screens also, just make sure you line from pin 1. contact [email protected]
minimal interface board for ili9341 screens. R1 is a 10ohm resistor (0805 size) , but can be replaced with other values to adjust backlight brightness. The less commonly used touch interface pins are broke out to pads on the back. can be used for 2.2" screens also, just make sure you line from pin 1. contact [email protected]
