MicroSD Connector 0475710001 Breakout v1.0

By Jenner

2 layer board of 0.99 x 0.65 inches (25.1 x 16.4 mm).
Shared on February 6th, 2017 20:54

Breadboard-compatible breakout for a micro SD card using a very small push-pull connector.

The board has surface mount parts which may be easier to solder with paste or tinned pads and a hot plate, toaster oven, or hot air rework station.

The Basic Breakouts Github repo has the design files and parts list.

This project is released under the Open Hardware License v1.2.


MicroSD Connector 0475710001 Breakout v1.0

By Jenner

2 layer board of 0.99 x 0.65 inches (25.1 x 16.4 mm).
Shared on February 6th, 2017 20:54

Breadboard-compatible breakout for a micro SD card using a very small push-pull connector.

The board has surface mount parts which may be easier to solder with paste or tinned pads and a hot plate, toaster oven, or hot air rework station.

The Basic Breakouts Github repo has the design files and parts list.

This project is released under the Open Hardware License v1.2.