XMega_E5 Breakout v1.0.2
author: nsayer
2 layer board of 1.40 x 0.70 inches (35.6 x 17.8 mm)
Uploaded:
February 27, 2019
Shared:
February 27, 2019
Total Price:
$4.90
The ATXMega chips are not available as through-hole devices. The ATXMega32E5 is a high powered substitute for the ATMega328P made famous by Arduino. This breakout board brings out all pins except port R (but instead adds footprints for a 1206 crystal) and the analog Vcc and ground (hooked together with bypass caps to digital Vcc and ground). In addition to breaking out the two PDI pins, a standard 2x3 PDI programming interface footprint is on the board.
Note that this is not a 5 volt tolerant chip.
This version adds the recommended bypass/filtering components to the analog Vcc pin.
- C1 & C2 - 0.1µF 0805
- C3 & C4 - 15 pF 0805
- C5 - 10 µF 0805
- L1 - 400Ω ferrite bead
- R1 - 10 kΩ 0805
- X1 - 32.768 kHz 1206
- And, of course, IC1 is an ATXMegannE5
The ATXMega chips are not available as through-hole devices. The ATXMega32E5 is a high powered substitute for the ATMega328P made famous by Arduino. This breakout board brings out all pins except port R (but instead adds footprints for a 1206 crystal) and the analog Vcc and ground (hooked together with bypass caps to digital Vcc and ground). In addition to breaking out the two PDI pins, a standard 2x3 PDI programming interface footprint is on the board.
Note that this is not a 5 volt tolerant chip.
This version adds the recommended bypass/filtering components to the analog Vcc pin.
- C1 & C2 - 0.1µF 0805
- C3 & C4 - 15 pF 0805
- C5 - 10 µF 0805
- L1 - 400Ω ferrite bead
- R1 - 10 kΩ 0805
- X1 - 32.768 kHz 1206
- And, of course, IC1 is an ATXMegannE5
