AtmelICE Adapter
author: nsayer
2 layer board of 1.35 x 0.80 inches (34.3 x 20.3 mm)
Uploaded:
November 02, 2017
Shared:
November 02, 2017
Total Price:
$5.40
This board is an adapter for the AtmelICE programmer.
The AtmelICE is a very versatile in system programmer and debugger, but it has a couple of small drawbacks. It doesn’t supply target power at all, and the cable they supply to adapt to 6 pin 100 mil sockets is kind of fragile.
This board fixes both of those. You use a straight-through 10 pin 50 mil cable from the AtmelICE and then a standard 6 pin 100 mil cable to the target. Optionally, you can connect a USB cable up to the board and a jumper will select between injecting +5 volts or +3.3 volts (from an on-board LDO) to the target power line.
The pinout should work for ISP and PDI devices (ATTiny, ATMega and ATXmega).
This board is an adapter for the AtmelICE programmer.
The AtmelICE is a very versatile in system programmer and debugger, but it has a couple of small drawbacks. It doesn’t supply target power at all, and the cable they supply to adapt to 6 pin 100 mil sockets is kind of fragile.
This board fixes both of those. You use a straight-through 10 pin 50 mil cable from the AtmelICE and then a standard 6 pin 100 mil cable to the target. Optionally, you can connect a USB cable up to the board and a jumper will select between injecting +5 volts or +3.3 volts (from an on-board LDO) to the target power line.
The pinout should work for ISP and PDI devices (ATTiny, ATMega and ATXmega).
