2 layer board of 0.98 x 2.74 inches (24.8 x 69.6 mm)
Uploaded:
July 21, 2023
Shared:
July 21, 2023
Total Price:
$13.35
The is a replacement for the Virtual Boy lenses' ribbon cable.
Order them in flex PCB.
You’ll have to:
1. Remove the old ribbon cable from the lens
2. Salvage the cardboard stiffer from it
3. Cut the vias following the line to castellated them (use an Xacto knife, best is a micro scissor)
4. Install the ribbon with flux, and use a multimeter to avoid bridges
5. Wrap the base (lens side) with capton tape to insolate the soldering and give a bit of strenght of the installation.
The is a replacement for the Virtual Boy lenses' ribbon cable.
Order them in flex PCB.
You’ll have to:
1. Remove the old ribbon cable from the lens
2. Salvage the cardboard stiffer from it
3. Cut the vias following the line to castellated them (use an Xacto knife, best is a micro scissor)
4. Install the ribbon with flux, and use a multimeter to avoid bridges
5. Wrap the base (lens side) with capton tape to insolate the soldering and give a bit of strenght of the installation.
