STM32F103 Breakout Board V1
author: dewhisna
2 layer board of 2.31 x 2.41 inches (58.6 x 61.1 mm)
Uploaded:
September 05, 2017
Shared:
September 05, 2017
Total Price:
$27.70
Breakout board for the common and widely available STM32F103C8T6 “sticks”. Provides easy connection for both I2C channels at both +5V and +3.3V with level converters. Has dual serial FTDI ports with level shifters, MicroSD Card slot on SPI #2, Waveshare compatible SN65HVD230 CAN connector port, and breakout connectors for Analog, PWM, and SPI #1.
Assembly Note: Be sure to trim the bottoms of the ST-Link connector pins on the STM32F103C8T6 board before soldering it to this breakout board. If you don’t, those pins will likely collide with C1 and perhaps R20 and R24. Trimming them, however, gives plenty of clearance.
Breakout board for the common and widely available STM32F103C8T6 “sticks”. Provides easy connection for both I2C channels at both +5V and +3.3V with level converters. Has dual serial FTDI ports with level shifters, MicroSD Card slot on SPI #2, Waveshare compatible SN65HVD230 CAN connector port, and breakout connectors for Analog, PWM, and SPI #1.
Assembly Note: Be sure to trim the bottoms of the ST-Link connector pins on the STM32F103C8T6 board before soldering it to this breakout board. If you don’t, those pins will likely collide with C1 and perhaps R20 and R24. Trimming them, however, gives plenty of clearance.
